[PATCH 0/2] drm/panel: add support for the BOE TV101WUM-LL2 DSI Display Panel

[PATCH 0/2] drm/panel: add support for the BOE TV101WUM-LL2 DSI Display Panel

[Neil Armstrong]

Document and add support for the 1200x1920 BOE TV101WUM-LL2 DSI
Display Panel found in the Lenovo Smart Tab M10 tablet.
The controller powering the panel is unknown.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
Neil Armstrong (2):
      dt-bindings: display: panel: document BOE TV101WUM-LL2 DSI Display Panel
      drm/panel: add BOE tv101wum-ll2 panel driver

 .../bindings/display/panel/boe,tv101wum-ll2.yaml   |  63 ++++++
 drivers/gpu/drm/panel/Kconfig                      |   9 +
 drivers/gpu/drm/panel/Makefile                     |   1 +
 drivers/gpu/drm/panel/panel-boe-tv101wum-ll2.c     | 240 +++++++++++++++++++++
 4 files changed, 313 insertions(+)
---
base-commit: 97e1ea2dc264da85da53b6ae5726a130bef690a3
change-id: 20240709-topic-sdm450-upstream-tbx605f-panel-f13d55fbd444

Best regards,
-- 
Neil Armstrong <neil.armstrong@linaro.org>

[PATCH 1/2] dt-bindings: display: panel: document BOE TV101WUM-LL2 DSI Display Panel

[Neil Armstrong]

Document the 1200x1920 BOE TV101WUM-LL2 DSI Display Panel found
in the Lenovo Smart Tab M10 tablet. The controller is unknown.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 .../bindings/display/panel/boe,tv101wum-ll2.yaml   | 63 ++++++++++++++++++++++
 1 file changed, 63 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-ll2.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-ll2.yaml
new file mode 100644
index 000000000000..dced98e1c69a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-ll2.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,tv101wum-ll2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE TV101WUM-LL2 DSI Display Panel
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: boe,tv101wum-ll2
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  backlight: true
+  reset-gpios: true
+  vsp-supply: true
+  vsn-supply: true
+  port: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - vsp-supply
+  - vsn-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "boe,tv101wum-ll2";
+            reg = <0>;
+
+            vsn-supply = <&vsn_lcd>;
+            vsp-supply = <&vsp_lcd>;
+
+            reset-gpios = <&pio 45 GPIO_ACTIVE_LOW>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+
+...

-- 
2.34.1

[PATCH 2/2] drm/panel: add BOE tv101wum-ll2 panel driver

[Neil Armstrong]

Add support for the 1200x1920 BOE TV101WUM-LL2 DSI Display Panel found
in the Lenovo Smart Tab M10 tablet. The controller is unknown.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 drivers/gpu/drm/panel/Kconfig                  |   9 +
 drivers/gpu/drm/panel/Makefile                 |   1 +
 drivers/gpu/drm/panel/panel-boe-tv101wum-ll2.c | 240 +++++++++++++++++++++++++
 3 files changed, 250 insertions(+)

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 9f49b0189d3b..b52d255f65e6 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -87,6 +87,15 @@ config DRM_PANEL_BOE_TV101WUM_NL6
 	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
 	  45NA WUXGA PANEL DSI Video Mode panel
 
+config DRM_PANEL_BOE_TV101WUM_LL2
+	tristate "BOE TV101WUM LL2 1200x1920 panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to support for BOE TV101WUM-LL2
+	  WUXGA PANEL DSI Video Mode panel
+
 config DRM_PANEL_EBBG_FT8719
 	tristate "EBBG FT8719 panel driver"
 	depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 5581387707c6..79c90894b6a4 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0) += panel-boe-bf060y8m-aj0.o
 obj-$(CONFIG_DRM_PANEL_BOE_HIMAX8279D) += panel-boe-himax8279d.o
 obj-$(CONFIG_DRM_PANEL_BOE_TH101MB31UIG002_28A) += panel-boe-th101mb31ig002-28a.o
 obj-$(CONFIG_DRM_PANEL_BOE_TV101WUM_NL6) += panel-boe-tv101wum-nl6.o
+obj-$(CONFIG_DRM_PANEL_BOE_TV101WUM_LL2) += panel-boe-tv101wum-ll2.o
 obj-$(CONFIG_DRM_PANEL_DSI_CM) += panel-dsi-cm.o
 obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o
 obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-ll2.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-ll2.c
new file mode 100644
index 000000000000..5513cb48d949
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-ll2.c
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
+//   Copyright (c) 2013, The Linux Foundation. All rights reserved.
+//   Copyright (c) 2024, Neil Armstrong <neil.armstrong@linaro.org>
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_probe_helper.h>
+
+struct boe_tv101wum_ll2 {
+	struct drm_panel panel;
+	struct mipi_dsi_device *dsi;
+	struct gpio_desc *reset_gpio;
+	struct regulator_bulk_data supplies[2];
+};
+
+static inline struct boe_tv101wum_ll2 *to_boe_tv101wum_ll2(struct drm_panel *panel)
+{
+	return container_of(panel, struct boe_tv101wum_ll2, panel);
+}
+
+static void boe_tv101wum_ll2_reset(struct boe_tv101wum_ll2 *ctx)
+{
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+	usleep_range(5000, 6000);
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+	usleep_range(5000, 6000);
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+
+	msleep(120);
+}
+
+static int boe_tv101wum_ll2_on(struct boe_tv101wum_ll2 *ctx)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
+
+	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
+
+	mipi_dsi_msleep(&dsi_ctx, 120);
+
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x50, 0x5a, 0x0e);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x80, 0xff, 0x81, 0x68, 0x6c, 0x22,
+				     0x6d, 0x12, 0x00, 0x00, 0x00, 0x00, 0x00);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x50, 0x5a, 0x23);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x90, 0x00, 0x00);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x94, 0x2c, 0x00);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x50, 0x5a, 0x19);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xa2, 0x38);
+
+	mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0x50, 0x5a, 0x0c);
+	mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0x80, 0xfd);
+	mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0x50, 0x00);
+
+	mipi_dsi_dcs_set_display_on_multi(&dsi_ctx);
+
+	mipi_dsi_msleep(&dsi_ctx, 20);
+
+	return dsi_ctx.accum_err;
+}
+
+static int boe_tv101wum_ll2_off(struct boe_tv101wum_ll2 *ctx)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
+
+	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+	mipi_dsi_dcs_set_display_off_multi(&dsi_ctx);
+
+	mipi_dsi_msleep(&dsi_ctx, 70);
+
+	mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);
+
+	mipi_dsi_msleep(&dsi_ctx, 20);
+
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x04, 0x5a);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x05, 0x5a);
+
+	mipi_dsi_msleep(&dsi_ctx, 150);
+
+	return dsi_ctx.accum_err;
+}
+
+static int boe_tv101wum_ll2_prepare(struct drm_panel *panel)
+{
+	struct boe_tv101wum_ll2 *ctx = to_boe_tv101wum_ll2(panel);
+	struct device *dev = &ctx->dsi->dev;
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies),
+				    ctx->supplies);
+	if (ret < 0)
+		return ret;
+
+	boe_tv101wum_ll2_reset(ctx);
+
+	ret = boe_tv101wum_ll2_on(ctx);
+	if (ret < 0) {
+		dev_err(dev, "Failed to initialize panel: %d\n", ret);
+		gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int boe_tv101wum_ll2_unprepare(struct drm_panel *panel)
+{
+	struct boe_tv101wum_ll2 *ctx = to_boe_tv101wum_ll2(panel);
+	struct device *dev = &ctx->dsi->dev;
+	int ret;
+
+	ret = boe_tv101wum_ll2_off(ctx);
+	if (ret < 0)
+		dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
+
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+
+	regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+
+	return 0;
+}
+
+static const struct drm_display_mode boe_tv101wum_ll2_mode = {
+	.clock = (1200 + 27 + 8 + 12) * (1920 + 155 + 8 + 32) * 60 / 1000,
+	.hdisplay = 1200,
+	.hsync_start = 1200 + 27,
+	.hsync_end = 1200 + 27 + 8,
+	.htotal = 1200 + 27 + 8 + 12,
+	.vdisplay = 1920,
+	.vsync_start = 1920 + 155,
+	.vsync_end = 1920 + 155 + 8,
+	.vtotal = 1920 + 155 + 8 + 32,
+	.width_mm = 136,
+	.height_mm = 217,
+	.type = DRM_MODE_TYPE_DRIVER,
+};
+
+static int boe_tv101wum_ll2_get_modes(struct drm_panel *panel,
+				      struct drm_connector *connector)
+{
+	return drm_connector_helper_get_modes_fixed(connector, &boe_tv101wum_ll2_mode);
+}
+
+static const struct drm_panel_funcs boe_tv101wum_ll2_panel_funcs = {
+	.prepare = boe_tv101wum_ll2_prepare,
+	.unprepare = boe_tv101wum_ll2_unprepare,
+	.get_modes = boe_tv101wum_ll2_get_modes,
+};
+
+static int boe_tv101wum_ll2_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct boe_tv101wum_ll2 *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->supplies[0].supply = "vsp";
+	ctx->supplies[1].supply = "vsn";
+
+	ret = devm_regulator_bulk_get(&dsi->dev, ARRAY_SIZE(ctx->supplies),
+				      ctx->supplies);
+	if (ret < 0)
+		return ret;
+
+	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(ctx->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
+				     "Failed to get reset-gpios\n");
+
+	ctx->dsi = dsi;
+	mipi_dsi_set_drvdata(dsi, ctx);
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+			  MIPI_DSI_MODE_VIDEO_HSE;
+
+	drm_panel_init(&ctx->panel, dev, &boe_tv101wum_ll2_panel_funcs,
+		       DRM_MODE_CONNECTOR_DSI);
+	ctx->panel.prepare_prev_first = true;
+
+	ret = drm_panel_of_backlight(&ctx->panel);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to get backlight\n");
+
+	drm_panel_add(&ctx->panel);
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		drm_panel_remove(&ctx->panel);
+		return dev_err_probe(dev, ret, "Failed to attach to DSI host\n");
+	}
+
+	return 0;
+}
+
+static void boe_tv101wum_ll2_remove(struct mipi_dsi_device *dsi)
+{
+	struct boe_tv101wum_ll2 *ctx = mipi_dsi_get_drvdata(dsi);
+	int ret;
+
+	ret = mipi_dsi_detach(dsi);
+	if (ret < 0)
+		dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
+
+	drm_panel_remove(&ctx->panel);
+}
+
+static const struct of_device_id boe_tv101wum_ll2_of_match[] = {
+	{ .compatible = "boe,tv101wum-ll2" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, boe_tv101wum_ll2_of_match);
+
+static struct mipi_dsi_driver boe_tv101wum_ll2_driver = {
+	.probe = boe_tv101wum_ll2_probe,
+	.remove = boe_tv101wum_ll2_remove,
+	.driver = {
+		.name = "panel-boe-tv101wum_ll2",
+		.of_match_table = boe_tv101wum_ll2_of_match,
+	},
+};
+module_mipi_dsi_driver(boe_tv101wum_ll2_driver);
+
+MODULE_DESCRIPTION("DRM driver for Boe TV101WUM-LL2 Panel");
+MODULE_LICENSE("GPL");

-- 
2.34.1

Re: [PATCH 1/2] dt-bindings: display: panel: document BOE TV101WUM-LL2 DSI Display Panel

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 321 bytes --]

On Tue, Jul 09, 2024 at 03:05:44PM +0200, Neil Armstrong wrote:
> Document the 1200x1920 BOE TV101WUM-LL2 DSI Display Panel found
> in the Lenovo Smart Tab M10 tablet. The controller is unknown.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH 2/2] drm/panel: add BOE tv101wum-ll2 panel driver

[Neil Armstrong]

Hi Jessica, Doug,

On 09/07/2024 15:05, Neil Armstrong wrote:
> Add support for the 1200x1920 BOE TV101WUM-LL2 DSI Display Panel found
> in the Lenovo Smart Tab M10 tablet. The controller is unknown.

Could you review this patch ?

Thanks !
Neil

> 
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
>   drivers/gpu/drm/panel/Kconfig                  |   9 +
>   drivers/gpu/drm/panel/Makefile                 |   1 +
>   drivers/gpu/drm/panel/panel-boe-tv101wum-ll2.c | 240 +++++++++++++++++++++++++
>   3 files changed, 250 insertions(+)
>

<snip>

Re: [PATCH 2/2] drm/panel: add BOE tv101wum-ll2 panel driver

[Doug Anderson]

Hi,

On Tue, Jul 9, 2024 at 6:06 AM Neil Armstrong <neil.armstrong@linaro.org> wrote:
>
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index 5581387707c6..79c90894b6a4 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -7,6 +7,7 @@ obj-$(CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0) += panel-boe-bf060y8m-aj0.o
>  obj-$(CONFIG_DRM_PANEL_BOE_HIMAX8279D) += panel-boe-himax8279d.o
>  obj-$(CONFIG_DRM_PANEL_BOE_TH101MB31UIG002_28A) += panel-boe-th101mb31ig002-28a.o
>  obj-$(CONFIG_DRM_PANEL_BOE_TV101WUM_NL6) += panel-boe-tv101wum-nl6.o
> +obj-$(CONFIG_DRM_PANEL_BOE_TV101WUM_LL2) += panel-boe-tv101wum-ll2.o

nit: please sort. L comes before N.


>  obj-$(CONFIG_DRM_PANEL_DSI_CM) += panel-dsi-cm.o
>  obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o
>  obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
> diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-ll2.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-ll2.c
> new file mode 100644
> index 000000000000..5513cb48d949
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-ll2.c
> @@ -0,0 +1,240 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +// Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
> +//   Copyright (c) 2013, The Linux Foundation. All rights reserved.
> +//   Copyright (c) 2024, Neil Armstrong <neil.armstrong@linaro.org>
> +
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/module.h>
> +#include <linux/of.h>

nit: sort header files?

> +static int boe_tv101wum_ll2_prepare(struct drm_panel *panel)
> +{
> +       struct boe_tv101wum_ll2 *ctx = to_boe_tv101wum_ll2(panel);
> +       struct device *dev = &ctx->dsi->dev;
> +       int ret;
> +
> +       ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies),
> +                                   ctx->supplies);
> +       if (ret < 0)
> +               return ret;
> +
> +       boe_tv101wum_ll2_reset(ctx);
> +
> +       ret = boe_tv101wum_ll2_on(ctx);
> +       if (ret < 0) {
> +               dev_err(dev, "Failed to initialize panel: %d\n", ret);

nit: Do you really need this error message? The "_multi" variants are
all chatty and print the error message, so we don't really need this
here...


> +               gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> +               return ret;

Shouldn't you turn off the regulators?


> +static int boe_tv101wum_ll2_unprepare(struct drm_panel *panel)
> +{
> +       struct boe_tv101wum_ll2 *ctx = to_boe_tv101wum_ll2(panel);
> +       struct device *dev = &ctx->dsi->dev;
> +       int ret;
> +
> +       ret = boe_tv101wum_ll2_off(ctx);
> +       if (ret < 0)
> +               dev_err(dev, "Failed to un-initialize panel: %d\n", ret);

nit: Do you really need this error message? The "_multi" variants are
all chatty and print the error message, so we don't really need this
here...


> +
> +       gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> +
> +       regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
> +
> +       return 0;

Maybe add a comment justifying why you don't return the error code
that boe_tv101wum_ll2_off() returned?


> +static int boe_tv101wum_ll2_get_modes(struct drm_panel *panel,
> +                                     struct drm_connector *connector)
> +{
> +       return drm_connector_helper_get_modes_fixed(connector, &boe_tv101wum_ll2_mode);

Random question for you: on panels that don't use the
drm_connector_helper the "bpc" gets set here. Is there a reason why
some panel drivers (like this one) don't set bpc?


> +static int boe_tv101wum_ll2_probe(struct mipi_dsi_device *dsi)
> +{
> +       struct device *dev = &dsi->dev;
> +       struct boe_tv101wum_ll2 *ctx;
> +       int ret;
> +
> +       ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> +       if (!ctx)
> +               return -ENOMEM;
> +
> +       ctx->supplies[0].supply = "vsp";
> +       ctx->supplies[1].supply = "vsn";
> +
> +       ret = devm_regulator_bulk_get(&dsi->dev, ARRAY_SIZE(ctx->supplies),
> +                                     ctx->supplies);

Any chance I can convince you to use devm_regulator_bulk_get_const()?
Then you can list your supply structures as "static const" instead of
having to initialize them via code.


> +       if (ret < 0)
> +               return ret;
> +
> +       ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> +       if (IS_ERR(ctx->reset_gpio))
> +               return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
> +                                    "Failed to get reset-gpios\n");
> +
> +       ctx->dsi = dsi;
> +       mipi_dsi_set_drvdata(dsi, ctx);
> +
> +       dsi->lanes = 4;
> +       dsi->format = MIPI_DSI_FMT_RGB888;
> +       dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
> +                         MIPI_DSI_MODE_VIDEO_HSE;
> +
> +       drm_panel_init(&ctx->panel, dev, &boe_tv101wum_ll2_panel_funcs,
> +                      DRM_MODE_CONNECTOR_DSI);
> +       ctx->panel.prepare_prev_first = true;
> +
> +       ret = drm_panel_of_backlight(&ctx->panel);
> +       if (ret)
> +               return dev_err_probe(dev, ret, "Failed to get backlight\n");
> +
> +       drm_panel_add(&ctx->panel);

Any chance you could add devm_drm_panel_add() and then use it? Then
you can fully get rid of your remove and error handling since
devm_mipi_dsi_attach() already exists. Note that this would not change
object lifetimes at all since you're already calling
drm_panel_remove() in your remove code--it would just clean up the
code...


> +static struct mipi_dsi_driver boe_tv101wum_ll2_driver = {
> +       .probe = boe_tv101wum_ll2_probe,
> +       .remove = boe_tv101wum_ll2_remove,
> +       .driver = {
> +               .name = "panel-boe-tv101wum_ll2",
> +               .of_match_table = boe_tv101wum_ll2_of_match,
> +       },
> +};
> +module_mipi_dsi_driver(boe_tv101wum_ll2_driver);
> +
> +MODULE_DESCRIPTION("DRM driver for Boe TV101WUM-LL2 Panel");

Should "Boe" be "BOE" ?

Re: [PATCH 2/2] drm/panel: add BOE tv101wum-ll2 panel driver

[Neil Armstrong]

On 23/07/2024 21:17, Doug Anderson wrote:
> Hi,
> 
> On Tue, Jul 9, 2024 at 6:06 AM Neil Armstrong <neil.armstrong@linaro.org> wrote:
>>
>> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
>> index 5581387707c6..79c90894b6a4 100644
>> --- a/drivers/gpu/drm/panel/Makefile
>> +++ b/drivers/gpu/drm/panel/Makefile
>> @@ -7,6 +7,7 @@ obj-$(CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0) += panel-boe-bf060y8m-aj0.o
>>   obj-$(CONFIG_DRM_PANEL_BOE_HIMAX8279D) += panel-boe-himax8279d.o
>>   obj-$(CONFIG_DRM_PANEL_BOE_TH101MB31UIG002_28A) += panel-boe-th101mb31ig002-28a.o
>>   obj-$(CONFIG_DRM_PANEL_BOE_TV101WUM_NL6) += panel-boe-tv101wum-nl6.o
>> +obj-$(CONFIG_DRM_PANEL_BOE_TV101WUM_LL2) += panel-boe-tv101wum-ll2.o
> 
> nit: please sort. L comes before N.

Good catch, thx

> 
> 
>>   obj-$(CONFIG_DRM_PANEL_DSI_CM) += panel-dsi-cm.o
>>   obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o
>>   obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
>> diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-ll2.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-ll2.c
>> new file mode 100644
>> index 000000000000..5513cb48d949
>> --- /dev/null
>> +++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-ll2.c
>> @@ -0,0 +1,240 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +// Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
>> +//   Copyright (c) 2013, The Linux Foundation. All rights reserved.
>> +//   Copyright (c) 2024, Neil Armstrong <neil.armstrong@linaro.org>
>> +
>> +#include <linux/delay.h>
>> +#include <linux/gpio/consumer.h>
>> +#include <linux/regulator/consumer.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
> 
> nit: sort header files?

Will do while I'm it, but I don't personally care of the include order..

> 
>> +static int boe_tv101wum_ll2_prepare(struct drm_panel *panel)
>> +{
>> +       struct boe_tv101wum_ll2 *ctx = to_boe_tv101wum_ll2(panel);
>> +       struct device *dev = &ctx->dsi->dev;
>> +       int ret;
>> +
>> +       ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies),
>> +                                   ctx->supplies);
>> +       if (ret < 0)
>> +               return ret;
>> +
>> +       boe_tv101wum_ll2_reset(ctx);
>> +
>> +       ret = boe_tv101wum_ll2_on(ctx);
>> +       if (ret < 0) {
>> +               dev_err(dev, "Failed to initialize panel: %d\n", ret);
> 
> nit: Do you really need this error message? The "_multi" variants are
> all chatty and print the error message, so we don't really need this
> here...

Yeah you're right, it's a leftover of the linux-mdss-dsi-panel-driver-generator

> 
> 
>> +               gpiod_set_value_cansleep(ctx->reset_gpio, 1);
>> +               return ret;
> 
> Shouldn't you turn off the regulators?

Indeed

> 
> 
>> +static int boe_tv101wum_ll2_unprepare(struct drm_panel *panel)
>> +{
>> +       struct boe_tv101wum_ll2 *ctx = to_boe_tv101wum_ll2(panel);
>> +       struct device *dev = &ctx->dsi->dev;
>> +       int ret;
>> +
>> +       ret = boe_tv101wum_ll2_off(ctx);
>> +       if (ret < 0)
>> +               dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
> 
> nit: Do you really need this error message? The "_multi" variants are
> all chatty and print the error message, so we don't really need this
> here...

Another leftover

> 
> 
>> +
>> +       gpiod_set_value_cansleep(ctx->reset_gpio, 1);
>> +
>> +       regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
>> +
>> +       return 0;
> 
> Maybe add a comment justifying why you don't return the error code
> that boe_tv101wum_ll2_off() returned?

Good point, as far as I remember I always avoided returning errors
when disabling things, I'll investigate

> 
> 
>> +static int boe_tv101wum_ll2_get_modes(struct drm_panel *panel,
>> +                                     struct drm_connector *connector)
>> +{
>> +       return drm_connector_helper_get_modes_fixed(connector, &boe_tv101wum_ll2_mode);
> 
> Random question for you: on panels that don't use the
> drm_connector_helper the "bpc" gets set here. Is there a reason why
> some panel drivers (like this one) don't set bpc?

Good question, I'll check

> 
> 
>> +static int boe_tv101wum_ll2_probe(struct mipi_dsi_device *dsi)
>> +{
>> +       struct device *dev = &dsi->dev;
>> +       struct boe_tv101wum_ll2 *ctx;
>> +       int ret;
>> +
>> +       ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
>> +       if (!ctx)
>> +               return -ENOMEM;
>> +
>> +       ctx->supplies[0].supply = "vsp";
>> +       ctx->supplies[1].supply = "vsn";
>> +
>> +       ret = devm_regulator_bulk_get(&dsi->dev, ARRAY_SIZE(ctx->supplies),
>> +                                     ctx->supplies);
> 
> Any chance I can convince you to use devm_regulator_bulk_get_const()?
> Then you can list your supply structures as "static const" instead of
> having to initialize them via code.

You convinced me!

> 
> 
>> +       if (ret < 0)
>> +               return ret;
>> +
>> +       ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
>> +       if (IS_ERR(ctx->reset_gpio))
>> +               return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
>> +                                    "Failed to get reset-gpios\n");
>> +
>> +       ctx->dsi = dsi;
>> +       mipi_dsi_set_drvdata(dsi, ctx);
>> +
>> +       dsi->lanes = 4;
>> +       dsi->format = MIPI_DSI_FMT_RGB888;
>> +       dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
>> +                         MIPI_DSI_MODE_VIDEO_HSE;
>> +
>> +       drm_panel_init(&ctx->panel, dev, &boe_tv101wum_ll2_panel_funcs,
>> +                      DRM_MODE_CONNECTOR_DSI);
>> +       ctx->panel.prepare_prev_first = true;
>> +
>> +       ret = drm_panel_of_backlight(&ctx->panel);
>> +       if (ret)
>> +               return dev_err_probe(dev, ret, "Failed to get backlight\n");
>> +
>> +       drm_panel_add(&ctx->panel);
> 
> Any chance you could add devm_drm_panel_add() and then use it? Then
> you can fully get rid of your remove and error handling since
> devm_mipi_dsi_attach() already exists. Note that this would not change
> object lifetimes at all since you're already calling
> drm_panel_remove() in your remove code--it would just clean up the
> code...

Yep I'll use it

> 
> 
>> +static struct mipi_dsi_driver boe_tv101wum_ll2_driver = {
>> +       .probe = boe_tv101wum_ll2_probe,
>> +       .remove = boe_tv101wum_ll2_remove,
>> +       .driver = {
>> +               .name = "panel-boe-tv101wum_ll2",
>> +               .of_match_table = boe_tv101wum_ll2_of_match,
>> +       },
>> +};
>> +module_mipi_dsi_driver(boe_tv101wum_ll2_driver);
>> +
>> +MODULE_DESCRIPTION("DRM driver for Boe TV101WUM-LL2 Panel");
> 
> Should "Boe" be "BOE" ?

Good point aswell!

Thanks for the review

Neil

Re: [PATCH 2/2] drm/panel: add BOE tv101wum-ll2 panel driver

[Doug Anderson]

Hi,

On Wed, Jul 24, 2024 at 12:51 AM Neil Armstrong
<neil.armstrong@linaro.org> wrote:
>
> >> @@ -0,0 +1,240 @@
> >> +// SPDX-License-Identifier: GPL-2.0-only
> >> +// Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
> >> +//   Copyright (c) 2013, The Linux Foundation. All rights reserved.
> >> +//   Copyright (c) 2024, Neil Armstrong <neil.armstrong@linaro.org>
> >> +
> >> +#include <linux/delay.h>
> >> +#include <linux/gpio/consumer.h>
> >> +#include <linux/regulator/consumer.h>
> >> +#include <linux/module.h>
> >> +#include <linux/of.h>
> >
> > nit: sort header files?
>
> Will do while I'm it, but I don't personally care of the include order..

FWIW: the main reason I push for sorting in cases like this is to
avoid merge conflicts as the driver changes. If everyone adds new
#includes at the end then every change will cause a merge conflict. If
things are kept sorted it's still possible to get a merge conflict but
the number goes down. Probably not super relevant in such a simple
driver but just the policy I push for in general.

The criteria for sorting doesn't matter to me (some people put
"nested" includes in separate sections and some just do a normal sort)
as long as it's obvious / consistent for a given file.

-Doug

Re: [PATCH 2/2] drm/panel: add BOE tv101wum-ll2 panel driver

[Neil Armstrong]

On 24/07/2024 09:50, Neil Armstrong wrote:
> On 23/07/2024 21:17, Doug Anderson wrote:
>> Hi,
>>
>> On Tue, Jul 9, 2024 at 6:06 AM Neil Armstrong <neil.armstrong@linaro.org> wrote:
>>>

<snip>

>>
>>> +static int boe_tv101wum_ll2_get_modes(struct drm_panel *panel,
>>> +                                     struct drm_connector *connector)
>>> +{
>>> +       return drm_connector_helper_get_modes_fixed(connector, &boe_tv101wum_ll2_mode);
>>
>> Random question for you: on panels that don't use the
>> drm_connector_helper the "bpc" gets set here. Is there a reason why
>> some panel drivers (like this one) don't set bpc?
> 
> Good question, I'll check

Ok so the documentation says :
https://elixir.bootlin.com/linux/v6.11-rc5/source/include/drm/drm_connector.h#L698
	 * @bpc: Maximum bits per color channel. Used by HDMI and DP outputs.

and looking at the code, all drivers considers bpc=8 when unset.

but yeah ultimately drm_connector_helper_get_modes_fixed should have a variant to set the bpc
when != 8.

In this case it's useless.

Neil


<snip>

Re: [PATCH 0/2] drm/panel: add support for the BOE TV101WUM-LL2 DSI Display Panel

[Neil Armstrong]

Hi,

On Tue, 09 Jul 2024 15:05:43 +0200, Neil Armstrong wrote:
> Document and add support for the 1200x1920 BOE TV101WUM-LL2 DSI
> Display Panel found in the Lenovo Smart Tab M10 tablet.
> The controller powering the panel is unknown.
> 
> 

Thanks, Applied to https://gitlab.freedesktop.org/drm/misc/kernel.git (drm-misc-next)

[1/2] dt-bindings: display: panel: document BOE TV101WUM-LL2 DSI Display Panel
      https://gitlab.freedesktop.org/drm/misc/kernel/-/commit/1da04eac69197032813940426b73fff6f0a84c64
[2/2] drm/panel: add BOE tv101wum-ll2 panel driver
      https://gitlab.freedesktop.org/drm/misc/kernel/-/commit/aec8485f226c36eb4eea1d489772cd6f2c40144d

-- 
Neil