From: Prasanna Kumar T S M <ptsm@linux.microsoft.com>
To: Jay Buddhabhatti <jay.buddhabhatti@amd.com>,
git@amd.com, ptsm@microsoft.com, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org, michal.simek@amd.com,
sven@kernel.org
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] arm64: dts: xilinx: versal-net: Remove CPU idle states
Date: Thu, 15 Oct 2026 15:21:43 +0530 [thread overview]
Message-ID: <4f9398a0-d303-4b7f-9967-9a5f3077cc1a@linux.microsoft.com> (raw)
In-Reply-To: <20175a31-2ef8-4c12-b329-616cb07d3d0b@linux.microsoft.com>
On 15-10-2026 15:01, Prasanna Kumar T S M wrote:
>
>
> On 07-10-2026 17:49, Jay Buddhabhatti wrote:
>> The sleep state powers down the CPU core, and the wake-up time cannot be
>> guaranteed because the firmware may be busy handling other tasks at the
>> time of the wake-up request. This leads to unpredictable and potentially
>> high wake-up latency during CPU idle.
>>
>> Remove the sleep state to avoid this dependency on firmware. The default
>> backend CPU idle state simply puts core in WFI and retains its context
>> without being powered off. Since wake-up from WFI is handled entirely in
>> hardware, it is effectively immediate (a few cycles) and does not depend
>> on firmware availability.
>>
>> Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
>> ---
>> Changes in v2:
>> - Remove the idle state instead of replacing it with a retention state.
>> - Update the subject and commit description.
>>
>> Link to v1: https://lore.kernel.org/all/20260727121842.3410495-1-
>> jay.buddhabhatti@amd.com/
>> ---
>> arch/arm64/boot/dts/xilinx/versal-net.dtsi | 29 ----------------------
>> 1 file changed, 29 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/xilinx/versal-net.dtsi b/arch/arm64/
>> boot/dts/xilinx/versal-net.dtsi
>> index 21bb917bcba1..9b74e59fd64a 100644
>> --- a/arch/arm64/boot/dts/xilinx/versal-net.dtsi
>> +++ b/arch/arm64/boot/dts/xilinx/versal-net.dtsi
>> @@ -103,7 +103,6 @@ cpu0: cpu@0 {
>> enable-method = "psci";
>> reg = <0>;
>> operating-points-v2 = <&cpu_opp_table>;
>> - cpu-idle-states = <&CPU_SLEEP_0>;
>> d-cache-size = <0x10000>; /* 64kB */
>> d-cache-line-size = <64>;
>> /* 4 ways set associativity */
>> @@ -133,7 +132,6 @@ cpu100: cpu@100 {
>> enable-method = "psci";
>> reg = <0x100>;
>> operating-points-v2 = <&cpu_opp_table>;
>> - cpu-idle-states = <&CPU_SLEEP_0>;
>> d-cache-size = <0x10000>; /* 64kB */
>> d-cache-line-size = <64>;
>> /* 4 ways set associativity */
>> @@ -163,7 +161,6 @@ cpu200: cpu@200 {
>> enable-method = "psci";
>> reg = <0x200>;
>> operating-points-v2 = <&cpu_opp_table>;
>> - cpu-idle-states = <&CPU_SLEEP_0>;
>> d-cache-size = <0x10000>; /* 64kB */
>> d-cache-line-size = <64>;
>> /* 4 ways set associativity */
>> @@ -193,7 +190,6 @@ cpu300: cpu@300 {
>> enable-method = "psci";
>> reg = <0x300>;
>> operating-points-v2 = <&cpu_opp_table>;
>> - cpu-idle-states = <&CPU_SLEEP_0>;
>> d-cache-size = <0x10000>; /* 64kB */
>> d-cache-line-size = <64>;
>> /* 4 ways set associativity */
>> @@ -223,7 +219,6 @@ cpu10000: cpu@10000 {
>> enable-method = "psci";
>> reg = <0x10000>;
>> operating-points-v2 = <&cpu_opp_table>;
>> - cpu-idle-states = <&CPU_SLEEP_0>;
>> d-cache-size = <0x10000>; /* 64kB */
>> d-cache-line-size = <64>;
>> /* 4 ways set associativity */
>> @@ -253,7 +248,6 @@ cpu10100: cpu@10100 {
>> enable-method = "psci";
>> reg = <0x10100>;
>> operating-points-v2 = <&cpu_opp_table>;
>> - cpu-idle-states = <&CPU_SLEEP_0>;
>> d-cache-size = <0x10000>; /* 64kB */
>> d-cache-line-size = <64>;
>> /* 4 ways set associativity */
>> @@ -283,7 +277,6 @@ cpu10200: cpu@10200 {
>> enable-method = "psci";
>> reg = <0x10200>;
>> operating-points-v2 = <&cpu_opp_table>;
>> - cpu-idle-states = <&CPU_SLEEP_0>;
>> d-cache-size = <0x10000>; /* 64kB */
>> d-cache-line-size = <64>;
>> /* 4 ways set associativity */
>> @@ -313,7 +306,6 @@ cpu10300: cpu@10300 {
>> enable-method = "psci";
>> reg = <0x10300>;
>> operating-points-v2 = <&cpu_opp_table>;
>> - cpu-idle-states = <&CPU_SLEEP_0>;
>> d-cache-size = <0x10000>; /* 64kB */
>> d-cache-line-size = <64>;
>> /* 4 ways set associativity */
>> @@ -343,7 +335,6 @@ cpu20000: cpu@20000 {
>> enable-method = "psci";
>> reg = <0x20000>;
>> operating-points-v2 = <&cpu_opp_table>;
>> - cpu-idle-states = <&CPU_SLEEP_0>;
>> d-cache-size = <0x10000>; /* 64kB */
>> d-cache-line-size = <64>;
>> /* 4 ways set associativity */
>> @@ -373,7 +364,6 @@ cpu20100: cpu@20100 {
>> enable-method = "psci";
>> reg = <0x20100>;
>> operating-points-v2 = <&cpu_opp_table>;
>> - cpu-idle-states = <&CPU_SLEEP_0>;
>> d-cache-size = <0x10000>; /* 64kB */
>> d-cache-line-size = <64>;
>> /* 4 ways set associativity */
>> @@ -403,7 +393,6 @@ cpu20200: cpu@20200 {
>> enable-method = "psci";
>> reg = <0x20200>;
>> operating-points-v2 = <&cpu_opp_table>;
>> - cpu-idle-states = <&CPU_SLEEP_0>;
>> d-cache-size = <0x10000>; /* 64kB */
>> d-cache-line-size = <64>;
>> /* 4 ways set associativity */
>> @@ -433,7 +422,6 @@ cpu20300: cpu@20300 {
>> enable-method = "psci";
>> reg = <0x20300>;
>> operating-points-v2 = <&cpu_opp_table>;
>> - cpu-idle-states = <&CPU_SLEEP_0>;
>> d-cache-size = <0x10000>; /* 64kB */
>> d-cache-line-size = <64>;
>> /* 4 ways set associativity */
>> @@ -463,7 +451,6 @@ cpu30000: cpu@30000 {
>> enable-method = "psci";
>> reg = <0x30000>;
>> operating-points-v2 = <&cpu_opp_table>;
>> - cpu-idle-states = <&CPU_SLEEP_0>;
>> d-cache-size = <0x10000>; /* 64kB */
>> d-cache-line-size = <64>;
>> /* 4 ways set associativity */
>> @@ -493,7 +480,6 @@ cpu30100: cpu@30100 {
>> enable-method = "psci";
>> reg = <0x30100>;
>> operating-points-v2 = <&cpu_opp_table>;
>> - cpu-idle-states = <&CPU_SLEEP_0>;
>> d-cache-size = <0x10000>; /* 64kB */
>> d-cache-line-size = <64>;
>> /* 4 ways set associativity */
>> @@ -523,7 +509,6 @@ cpu30200: cpu@30200 {
>> enable-method = "psci";
>> reg = <0x30200>;
>> operating-points-v2 = <&cpu_opp_table>;
>> - cpu-idle-states = <&CPU_SLEEP_0>;
>> d-cache-size = <0x10000>; /* 64kB */
>> d-cache-line-size = <64>;
>> /* 4 ways set associativity */
>> @@ -553,7 +538,6 @@ cpu30300: cpu@30300 {
>> enable-method = "psci";
>> reg = <0x30300>;
>> operating-points-v2 = <&cpu_opp_table>;
>> - cpu-idle-states = <&CPU_SLEEP_0>;
>> d-cache-size = <0x10000>; /* 64kB */
>> d-cache-line-size = <64>;
>> /* 4 ways set associativity */
>> @@ -632,19 +616,6 @@ llc: l4-cache { /* LLC inside CMN */
>> cache-size = <0x1000000>; /* 16MB */
>> cache-unified;
>> };
>> -
>> - idle-states {
>> - entry-method = "psci";
>> -
>> - CPU_SLEEP_0: cpu-sleep-0 {
>> - compatible = "arm,idle-state";
>> - arm,psci-suspend-param = <0x40000000>;
>> - local-timer-stop;
>> - entry-latency-us = <300>;
>> - exit-latency-us = <600>;
>> - min-residency-us = <10000>;
>> - };
>> - };
>> };
>> cpu_opp_table: opp-table {
>
> This change works fine.
>
> Tested-by: Prasanna Kumar T S M <ptsm@linux.microsoft.com>
>
Change looks good to me.
Feel free to add:
Reviewed-by: Prasanna Kumar T S M <ptsm@linux.microsoft.com>
Regards,
Prasanna Kumar
prev parent reply other threads:[~2026-10-15 9:51 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-27 12:18 [PATCH] arm64: versal-net: Add retention state for cpu idle Jay Buddhabhatti
2026-07-27 12:29 ` sashiko-bot
2026-08-11 7:23 ` Michal Simek
2026-10-07 12:19 ` [PATCH v2] arm64: dts: xilinx: versal-net: Remove CPU idle states Jay Buddhabhatti
2026-10-15 9:31 ` Prasanna Kumar T S M
2026-10-15 9:51 ` Prasanna Kumar T S M [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4f9398a0-d303-4b7f-9967-9a5f3077cc1a@linux.microsoft.com \
--to=ptsm@linux.microsoft.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=git@amd.com \
--cc=jay.buddhabhatti@amd.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@amd.com \
--cc=ptsm@microsoft.com \
--cc=robh@kernel.org \
--cc=sven@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox