Re: [PATCH v3 0/1] Update the max31790 driver

[Chanh Nguyen <chanh@amperemail.onmicrosoft.com>]

Hi all,

I dropped the "Support config PWM output becomes TACH" patch. I'm 
implementing and testing the "Support config PWM output become TACH" 
support; I'll push this feature later. Now, I'm only adding the device 
tree binding for the max31790 device; it is necessary for some device 
tree upstreams that use the "maxim,max31790" compatible.

Best Regards,
Chanh

On 13/08/2024 15:41, Chanh Nguyen wrote:
> Add device tree binding for the max31790 device.
> 
> Changes in v2:
>   - Drop "driver" in the patch 1/3 commit title                           [Krzysztof]
>   - Update filename of the maxim,max31790.yaml                            [Krzysztof]
>   - Add the common fan schema to $ref                                     [Krzysztof]
>   - Update the node name to "fan-controller" in maxim,max31790.yaml       [Krzysztof]
>   - Update the vendor property name to "maxim,pwmout-pin-as-tach-input"   [Rob]
> Changes in v3:
>   - Drop redundant "bindings" in commit message                           [Krzysztof]
>   - Add the clocks and resets property to example                         [Krzysztof]
>   - Add child node refer to fan-common.yaml                               [Krzysztof, Conor]
>   - Drop "Support config PWM output become TACH" patch                    [Chanh]
>   - Drop "Add maxim,pwmout-pin-as-tach-input property" patch              [Chanh]
> 
> Chanh Nguyen (1):
>    dt-bindings: hwmon: Add maxim max31790
> 
>   .../bindings/hwmon/maxim,max31790.yaml        | 81 +++++++++++++++++++
>   1 file changed, 81 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml
>