devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marc Kleine-Budde <mkl@pengutronix.de>
To: "Hiremath, Vaibhav" <hvaibhav@ti.com>
Cc: "AnilKumar, Chimata" <anilkumar@ti.com>,
	"wg@grandegger.com" <wg@grandegger.com>,
	"linux-can@vger.kernel.org" <linux-can@vger.kernel.org>,
	"devicetree-discuss@lists.ozlabs.org"
	<devicetree-discuss@lists.ozlabs.org>,
	"Nori, Sekhar" <nsekhar@ti.com>, "Gole, Anant" <anantgole@ti.com>
Subject: Re: [PATCH v4 3/3] can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller
Date: Fri, 03 Aug 2012 21:09:25 +0200	[thread overview]
Message-ID: <501C21E5.9080106@pengutronix.de> (raw)
In-Reply-To: <79CD15C6BA57404B839C016229A409A83EA7F150@DBDE01.ent.ti.com>

[-- Attachment #1: Type: text/plain, Size: 1830 bytes --]

On 08/03/2012 08:32 AM, Hiremath, Vaibhav wrote:
> On Thu, Aug 02, 2012 at 18:43:11, AnilKumar, Chimata wrote:
>> Add Runtime PM support to C_CAN/D_CAN controller. The runtime PM
>> APIs control clocks for C_CAN/D_CAN IP and prevent access to the
>> register of C_CAN/D_CAN IP when clock is turned off.
>>
>> Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
>> ---
>>  drivers/net/can/c_can/c_can_platform.c |    8 ++++++++
>>  1 file changed, 8 insertions(+)
>>
>> diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
>> index d0a66cf..83a1e17 100644
>> --- a/drivers/net/can/c_can/c_can_platform.c
>> +++ b/drivers/net/can/c_can/c_can_platform.c
>> @@ -32,6 +32,7 @@
>>  #include <linux/clk.h>
>>  #include <linux/of.h>
>>  #include <linux/of_device.h>
>> +#include <linux/pm_runtime.h>
>>  
>>  #include <linux/can/dev.h>
>>  
>> @@ -177,6 +178,9 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev)
>>  		goto exit_free_device;
>>  	}
>>  
>> +	pm_runtime_enable(&pdev->dev);
>> +	pm_runtime_get_sync(&pdev->dev);
>> +
> 
> If module is inserted or built into the kernel, module stays in enabled 
> state always, isn't that wrong?
> Ideally, you should enable the module when it is required or being used.

Good point.

If you don't access the module's registers in the probe- (or its
subroutines) it should be enough to enable the module in the open()
function. Have a look at clk_prepare_enable / clk_disable_unprepare in
the flexcan driver.

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]

  reply	other threads:[~2012-08-03 19:09 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-08-02 13:13 [PATCH v3 0/3] Add DT support to C_CAN/D_CAN controller AnilKumar Ch
2012-08-02 13:13 ` [PATCH v4 1/3] can: c_can: Modify c_can device names AnilKumar Ch
2012-08-06  9:36   ` Marc Kleine-Budde
     [not found]     ` <501F9031.8050709-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2012-08-06  9:41       ` AnilKumar, Chimata
2012-08-02 13:13 ` [PATCH v4 2/3] can: c_can: Add device tree support to Bosch C_CAN/D_CAN controller AnilKumar Ch
2012-08-06  9:37   ` Marc Kleine-Budde
2012-08-02 13:13 ` [PATCH v4 3/3] can: c_can: Add runtime PM " AnilKumar Ch
     [not found]   ` <1343913191-14722-4-git-send-email-anilkumar-l0cyMroinI0@public.gmane.org>
2012-08-03  6:32     ` Hiremath, Vaibhav
2012-08-03 19:09       ` Marc Kleine-Budde [this message]
2012-08-06  6:48         ` Hiremath, Vaibhav
     [not found]           ` <79CD15C6BA57404B839C016229A409A83EA85CC3-Er742YJ7I/eIQmiDNMet8wC/G2K4zDHf@public.gmane.org>
2012-08-07 10:39             ` AnilKumar, Chimata

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=501C21E5.9080106@pengutronix.de \
    --to=mkl@pengutronix.de \
    --cc=anantgole@ti.com \
    --cc=anilkumar@ti.com \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=hvaibhav@ti.com \
    --cc=linux-can@vger.kernel.org \
    --cc=nsekhar@ti.com \
    --cc=wg@grandegger.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).