Re: [PATCH v3 0/6] omap-am33xx rtc dt support

[Sekhar Nori <nsekhar-l0cyMroinI0@public.gmane.org>]

On 7/27/2012 5:53 PM, Afzal Mohammed wrote:
> Hi,
> 
> This series makes rtc-omap driver DT capable, adds AM33xx
> RTC DT support along with a few enchancments to the driver.
> 
> rtc-omap driver is made intelligent enough to handle kicker
> mechanism. This helps in removing kicker mechanism support
> done for DaVinci at platform level.
> 
> This has been tested on Beaglebone (AM33xx platform) and on
> DaVinci DA850 EVM.
> 
> This series is based over linux-omap master and can be
> directly applied over linux-next, except for
> [PATCH 6/6] arm/dts: am33xx rtc node.
> 
> PATCH 6/6 should go through linux-omap tree and needs
> http://www.mail-archive.com/linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org/msg71644.html
> (arm/dts: am33xx wdt node) to get applied cleanly

I tested patches 1-5 on AM18x EVM using rtcwake and hwclock commands.
Also tested on DT enabled AM18x EVM using hwclock.

For patched 1-5:

Acked-by: Sekhar Nori <nsekhar-l0cyMroinI0@public.gmane.org>

Alessandro,

I assume you would want me to queue 2/6 through DaVinci tree. That patch
depends on 1/6 being accepted and merged by you. Let me know how you
want to move forward here.

Thanks,
Sekhar