From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hans de Goede Subject: Re: [PATCH 2/5] ata: libahci_platform: Support per-port interrupts Date: Fri, 22 Feb 2019 16:26:01 +0100 Message-ID: <5040d4cf-7da1-eefa-a8a3-bc4054d528da@redhat.com> References: <20190222145356.23072-1-miquel.raynal@bootlin.com> <20190222145356.23072-3-miquel.raynal@bootlin.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; Format="flowed" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20190222145356.23072-3-miquel.raynal@bootlin.com> Content-Language: en-US List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Miquel Raynal , Gregory Clement , Jason Cooper , Andrew Lunn , Sebastian Hesselbarth , Rob Herring , Mark Rutland , Jens Axboe , Thomas Gleixner , Marc Zyngier Cc: devicetree@vger.kernel.org, Antoine Tenart , Maxime Chevallier , Nadav Haklai , linux-ide@vger.kernel.org, Thomas Petazzoni , linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org Hi, On 2/22/19 3:53 PM, Miquel Raynal wrote: > Right now the ATA core only allows IPs to use a single interrupt. Some > of them (for instance the Armada-CP110 one) actually has one interrupt > per port. Add some logic to support such situation. > > We consider that either there is one single interrupt declared in the > main IP node, or there are per-port interrupts, each of them being > declared in the port sub-nodes. > > Signed-off-by: Miquel Raynal > --- > drivers/ata/acard-ahci.c | 2 +- > drivers/ata/ahci.c | 2 +- > drivers/ata/ahci.h | 3 +- > drivers/ata/libahci.c | 2 +- > drivers/ata/libahci_platform.c | 66 ++++++++++++++++++++++++++++------ > drivers/ata/sata_highbank.c | 2 +- > 6 files changed, 61 insertions(+), 16 deletions(-) > > diff --git a/drivers/ata/acard-ahci.c b/drivers/ata/acard-ahci.c > index 583e366be7e2..9414b81e994c 100644 > --- a/drivers/ata/acard-ahci.c > +++ b/drivers/ata/acard-ahci.c > @@ -434,7 +434,7 @@ static int acard_ahci_init_one(struct pci_dev *pdev, const struct pci_device_id > if (!hpriv) > return -ENOMEM; > > - hpriv->irq = pdev->irq; > + hpriv->irqs[0] = pdev->irq; > hpriv->flags |= (unsigned long)pi.private_data; > What code-path is going to alloc hpriv->irqs for drivers using this code-path which are not using libahci_platform .c ? Regards, Hans > if (!(hpriv->flags & AHCI_HFLAG_NO_MSI)) > diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c > index 021ce46e2e57..18bce556d85f 100644 > --- a/drivers/ata/ahci.c > +++ b/drivers/ata/ahci.c > @@ -1817,7 +1817,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) > /* legacy intx interrupts */ > pci_intx(pdev, 1); > } > - hpriv->irq = pci_irq_vector(pdev, 0); > + hpriv->irqs[0] = pci_irq_vector(pdev, 0); > > if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss) > host->flags |= ATA_HOST_PARALLEL_SCAN; > diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h > index ef356e70e6de..1f1c00be5b2e 100644 > --- a/drivers/ata/ahci.h > +++ b/drivers/ata/ahci.h > @@ -361,7 +361,7 @@ struct ahci_host_priv { > struct phy **phys; > unsigned nports; /* Number of ports */ > void *plat_data; /* Other platform data */ > - unsigned int irq; /* interrupt line */ > + unsigned int *irqs; /* interrupt line(s) */ > /* > * Optional ahci_start_engine override, if not set this gets set to the > * default ahci_start_engine during ahci_save_initial_config, this can > @@ -432,6 +432,7 @@ void ahci_print_info(struct ata_host *host, const char *scc_s); > int ahci_host_activate(struct ata_host *host, struct scsi_host_template *sht); > void ahci_error_handler(struct ata_port *ap); > u32 ahci_handle_port_intr(struct ata_host *host, u32 irq_masked); > +int ahci_get_per_port_irq_vector(struct ata_host *host, int port); > > static inline void __iomem *__ahci_port_base(struct ata_host *host, > unsigned int port_no) > diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c > index 66d4906a5013..25970138a65a 100644 > --- a/drivers/ata/libahci.c > +++ b/drivers/ata/libahci.c > @@ -2602,7 +2602,7 @@ static int ahci_host_activate_multi_irqs(struct ata_host *host, > int ahci_host_activate(struct ata_host *host, struct scsi_host_template *sht) > { > struct ahci_host_priv *hpriv = host->private_data; > - int irq = hpriv->irq; > + int irq = hpriv->irqs[0]; > int rc; > > if (hpriv->flags & AHCI_HFLAG_MULTI_MSI) { > diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c > index 4b900fc659f7..af3d65c09087 100644 > --- a/drivers/ata/libahci_platform.c > +++ b/drivers/ata/libahci_platform.c > @@ -24,6 +24,7 @@ > #include > #include > #include > +#include > #include > #include > #include "ahci.h" > @@ -89,6 +90,14 @@ static void ahci_platform_disable_phys(struct ahci_host_priv *hpriv) > } > } > > +int ahci_get_per_port_irq_vector(struct ata_host *host, int port) > +{ > + struct ahci_host_priv *hpriv = host->private_data; > + > + return hpriv->irqs[port]; > +} > +EXPORT_SYMBOL_GPL(ahci_get_per_port_irq_vector); > + > /** > * ahci_platform_enable_clks - Enable platform clocks > * @hpriv: host private area to store config values > @@ -379,6 +388,7 @@ static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port, > * or for non devicetree enabled platforms a single clock > * 4) resets, if flags has AHCI_PLATFORM_GET_RESETS (optional) > * 5) phys (optional) > + * 6) interrupt(s) > * > * RETURNS: > * The allocated ahci_host_priv on success, otherwise an ERR_PTR value > @@ -390,7 +400,7 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev, > struct ahci_host_priv *hpriv; > struct clk *clk; > struct device_node *child; > - int i, enabled_ports = 0, rc = -ENOMEM, child_nodes; > + int i, enabled_ports = 0, rc = -ENOMEM, child_nodes, ctrl_irq; > u32 mask_port_map = 0; > > if (!devres_open_group(dev, NULL, GFP_KERNEL)) > @@ -483,10 +493,29 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev, > goto err_out; > } > > + hpriv->irqs = kzalloc(sizeof(*hpriv->irqs) * hpriv->nports, GFP_KERNEL); > + if (!hpriv->irqs) { > + rc = -ENOMEM; > + goto err_out; > + } > + > + ctrl_irq = platform_get_irq(pdev, 0); > + if (ctrl_irq < 0) { > + if (ctrl_irq == -EPROBE_DEFER) { > + rc = ctrl_irq; > + goto err_out; > + } > + ctrl_irq = 0; > + } > + > + if (ctrl_irq > 0) > + hpriv->irqs[0] = ctrl_irq; > + > if (child_nodes) { > for_each_child_of_node(dev->of_node, child) { > u32 port; > struct platform_device *port_dev __maybe_unused; > + int port_irq; > > if (!of_device_is_available(child)) > continue; > @@ -515,6 +544,18 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev, > } > #endif > > + if (!ctrl_irq) { > + port_irq = of_irq_get(child, 0); > + if (!port_irq) > + port_irq = -EINVAL; > + if (port_irq < 0) { > + rc = port_irq; > + goto err_out; > + } > + > + hpriv->irqs[port] = port_irq; > + } > + > rc = ahci_platform_get_phy(hpriv, port, dev, child); > if (rc) > goto err_out; > @@ -542,6 +583,18 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev, > if (rc == -EPROBE_DEFER) > goto err_out; > } > + > + if (!ctrl_irq && !enabled_ports) { > + dev_err(&pdev->dev, "No IRQ defined\n"); > + rc = -ENODEV; > + goto err_out; > + } > + > + if (enabled_ports > 1) { > + hpriv->flags |= AHCI_HFLAG_MULTI_MSI; > + hpriv->get_irq_vector = ahci_get_per_port_irq_vector; > + } > + > pm_runtime_enable(dev); > pm_runtime_get_sync(dev); > hpriv->got_runtime_pm = true; > @@ -578,16 +631,7 @@ int ahci_platform_init_host(struct platform_device *pdev, > struct ata_port_info pi = *pi_template; > const struct ata_port_info *ppi[] = { &pi, NULL }; > struct ata_host *host; > - int i, irq, n_ports, rc; > - > - irq = platform_get_irq(pdev, 0); > - if (irq <= 0) { > - if (irq != -EPROBE_DEFER) > - dev_err(dev, "no irq\n"); > - return irq; > - } > - > - hpriv->irq = irq; > + int i, n_ports, rc; > > /* prepare host */ > pi.private_data = (void *)(unsigned long)hpriv->flags; > diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c > index c8fc9280d6e4..dcfdab20021b 100644 > --- a/drivers/ata/sata_highbank.c > +++ b/drivers/ata/sata_highbank.c > @@ -496,7 +496,7 @@ static int ahci_highbank_probe(struct platform_device *pdev) > return -ENOMEM; > } > > - hpriv->irq = irq; > + hpriv->irqs[0] = irq; > hpriv->flags |= (unsigned long)pi.private_data; > > hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem)); >