From mboxrd@z Thu Jan 1 00:00:00 1970 From: Florian Vaussard Subject: Re: [PATCH 1/1] ARM: dts: OMAP3: Add gpio-twl4030 properties for Overo Date: Mon, 10 Sep 2012 15:33:42 +0200 Message-ID: <504DEC36.4020704@epfl.ch> References: <1347282996-31190-1-git-send-email-florian.vaussard@epfl.ch> <1347282996-31190-2-git-send-email-florian.vaussard@epfl.ch> <504DEA4E.7080109@ti.com> Reply-To: florian.vaussard@epfl.ch Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <504DEA4E.7080109@ti.com> Sender: linux-omap-owner@vger.kernel.org To: Benoit Cousson Cc: Tony Lindgren , Steve Sakoman , linux-omap@vger.kernel.org, devicetree-discuss@lists.ozlabs.org, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org >> Support the blue LED connected to the LEDB pin of the TWL4030 >> on the Gumstix Overo. >> >> Signed-off-by: Florian Vaussard >> --- >> arch/arm/boot/dts/omap3-overo.dtsi | 15 +++++++++++++++ >> 1 files changed, 15 insertions(+), 0 deletions(-) >> >> diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi >> index d6cc5e2..89808ce 100644 >> --- a/arch/arm/boot/dts/omap3-overo.dtsi >> +++ b/arch/arm/boot/dts/omap3-overo.dtsi >> @@ -13,6 +13,17 @@ >> >> /include/ "omap3.dtsi" >> >> +/ { > > BTW, I'm just wondering. Cannot we use overo without tobi? > > In that case, the model and compatible should probably be used as well: > > model = "TI OMAP3 Gumstix Overo"; > compatible = "ti,omap3-overo", "ti,omap3"; No, it cannot. The Overo needs to be plugged into an expansion board, at least to get the power. Hence the absence of model and compatible in omap3-overo.dtsi. Regards, Florian