* [PATCH] arm/dts: Add omap3-beagle.dts
@ 2012-09-10 22:57 Jon Hunter
2012-09-11 11:29 ` Benoit Cousson
0 siblings, 1 reply; 3+ messages in thread
From: Jon Hunter @ 2012-09-10 22:57 UTC (permalink / raw)
To: Tony Lindgren; +Cc: device-tree, linux-omap, linux-arm, Jon Hunter
Add a minimal dts for original OMAP3430/3530 version of the Beagle board. This
version of the Beagle board has 256MB of DDR and features the same TWL4030
power management IC (PMIC) as the Beagle board XM.
Given that the Beagle and Beagle-XM boards use the same PMIC, move the
definition of the VSIM regulator into the TWL4030.dtsi file so that we do not
need to duplicate in the Beagle board dts file.
This has been boot tested on an OMAP3530 Beagle board and verifing that the
SD/MMC interface is working with a SD card.
This patch is generated on top of Tony's patch for adding the Beagle board XM
dts file [1].
[1] http://marc.info/?l=linux-omap&m=134695790516943&w=2
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
arch/arm/boot/dts/omap3-beagle-xm.dts | 6 -----
arch/arm/boot/dts/omap3-beagle.dts | 46 +++++++++++++++++++++++++++++++++
arch/arm/boot/dts/twl4030.dtsi | 6 +++++
arch/arm/mach-omap2/Makefile.boot | 3 ++-
4 files changed, 54 insertions(+), 7 deletions(-)
create mode 100644 arch/arm/boot/dts/omap3-beagle.dts
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index df6d485..ef2c711 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -26,12 +26,6 @@
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
-
- vsim: regulator-vsim {
- compatible = "ti,twl4030-vsim";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- };
};
};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
new file mode 100644
index 0000000..90790d9
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+ model = "TI OMAP3 BeagleBoard";
+ compatible = "ti,omap3-beagle", "ti,omap3";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+ };
+};
+
+/include/ "twl4030.dtsi"
+
+&mmc1 {
+ vmmc-supply = <&vmmc1>;
+ vmmc_aux-supply = <&vsim>;
+ bus-width = <8>;
+};
+
+&mmc2 {
+ status = "disabled";
+};
+
+&mmc3 {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
index ff00017..c5337d4 100644
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -37,6 +37,12 @@
regulator-max-microvolt = <3150000>;
};
+ vsim: regulator-vsim {
+ compatible = "ti,twl4030-vsim";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
twl_gpio: gpio {
compatible = "ti,twl4030-gpio";
gpio-controller;
diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot
index 0e602b7..a469a55 100644
--- a/arch/arm/mach-omap2/Makefile.boot
+++ b/arch/arm/mach-omap2/Makefile.boot
@@ -3,7 +3,8 @@ params_phys-y := 0x80000100
initrd_phys-y := 0x80800000
dtb-$(CONFIG_SOC_OMAP2420) += omap2420-h4.dtb
-dtb-$(CONFIG_ARCH_OMAP3) += omap3-beagle-xm.dtb omap3-evm.dtb
+dtb-$(CONFIG_ARCH_OMAP3) += omap3-beagle.dtb omap3-beagle-xm.dtb \
+ omap3-evm.dtb
dtb-$(CONFIG_ARCH_OMAP4) += omap4-panda.dtb omap4-pandaES.dtb
dtb-$(CONFIG_ARCH_OMAP4) += omap4-var_som.dtb omap4-sdp.dtb
dtb-$(CONFIG_SOC_OMAP5) += omap5-evm.dtb
--
1.7.9.5
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] arm/dts: Add omap3-beagle.dts
2012-09-10 22:57 [PATCH] arm/dts: Add omap3-beagle.dts Jon Hunter
@ 2012-09-11 11:29 ` Benoit Cousson
2012-09-11 11:57 ` Benoit Cousson
0 siblings, 1 reply; 3+ messages in thread
From: Benoit Cousson @ 2012-09-11 11:29 UTC (permalink / raw)
To: Jon Hunter; +Cc: Tony Lindgren, device-tree, linux-omap, linux-arm
Hi Jon,
On 09/11/2012 12:57 AM, Jon Hunter wrote:
> Add a minimal dts for original OMAP3430/3530 version of the Beagle board. This
> version of the Beagle board has 256MB of DDR and features the same TWL4030
> power management IC (PMIC) as the Beagle board XM.
Thanks for the patch.
> Given that the Beagle and Beagle-XM boards use the same PMIC, move the
> definition of the VSIM regulator into the TWL4030.dtsi file so that we do not
> need to duplicate in the Beagle board dts file.
Good, catch, regulator definition has indeed nothing to do outside the
twl4030.dtsi.
> This has been boot tested on an OMAP3530 Beagle board and verifing that the
> SD/MMC interface is working with a SD card.
>
> This patch is generated on top of Tony's patch for adding the Beagle board XM
> dts file [1].
Tony has just updated his devel-dt with the DTS series I pushed plus the
beagle-xm introduction, so I'm gonna put this one on top and built a
for_3.7/dts_part2 branch sinec there are a couplf of USB / AM33xx pending.
Thanks,
Benoit
> [1] http://marc.info/?l=linux-omap&m=134695790516943&w=2
>
> Signed-off-by: Jon Hunter <jon-hunter@ti.com>
> ---
> arch/arm/boot/dts/omap3-beagle-xm.dts | 6 -----
> arch/arm/boot/dts/omap3-beagle.dts | 46 +++++++++++++++++++++++++++++++++
> arch/arm/boot/dts/twl4030.dtsi | 6 +++++
> arch/arm/mach-omap2/Makefile.boot | 3 ++-
> 4 files changed, 54 insertions(+), 7 deletions(-)
> create mode 100644 arch/arm/boot/dts/omap3-beagle.dts
>
> diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
> index df6d485..ef2c711 100644
> --- a/arch/arm/boot/dts/omap3-beagle-xm.dts
> +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
> @@ -26,12 +26,6 @@
> reg = <0x48>;
> interrupts = <7>; /* SYS_NIRQ cascaded to intc */
> interrupt-parent = <&intc>;
> -
> - vsim: regulator-vsim {
> - compatible = "ti,twl4030-vsim";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3000000>;
> - };
> };
> };
>
> diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
> new file mode 100644
> index 0000000..90790d9
> --- /dev/null
> +++ b/arch/arm/boot/dts/omap3-beagle.dts
> @@ -0,0 +1,46 @@
> +/*
> + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
2012?
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +/dts-v1/;
> +
> +/include/ "omap3.dtsi"
> +
> +/ {
> + model = "TI OMAP3 BeagleBoard";
> + compatible = "ti,omap3-beagle", "ti,omap3";
> +
> + memory {
> + device_type = "memory";
> + reg = <0x80000000 0x10000000>; /* 256 MB */
> + };
> +};
> +
> +&i2c1 {
> + clock-frequency = <2600000>;
> +
> + twl: twl@48 {
> + reg = <0x48>;
> + interrupts = <7>; /* SYS_NIRQ cascaded to intc */
> + interrupt-parent = <&intc>;
> + };
> +};
> +
> +/include/ "twl4030.dtsi"
> +
> +&mmc1 {
> + vmmc-supply = <&vmmc1>;
> + vmmc_aux-supply = <&vsim>;
> + bus-width = <8>;
> +};
> +
> +&mmc2 {
> + status = "disabled";
> +};
> +
> +&mmc3 {
> + status = "disabled";
> +};
> diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
> index ff00017..c5337d4 100644
> --- a/arch/arm/boot/dts/twl4030.dtsi
> +++ b/arch/arm/boot/dts/twl4030.dtsi
> @@ -37,6 +37,12 @@
> regulator-max-microvolt = <3150000>;
> };
>
> + vsim: regulator-vsim {
> + compatible = "ti,twl4030-vsim";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> twl_gpio: gpio {
> compatible = "ti,twl4030-gpio";
> gpio-controller;
> diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot
> index 0e602b7..a469a55 100644
> --- a/arch/arm/mach-omap2/Makefile.boot
> +++ b/arch/arm/mach-omap2/Makefile.boot
> @@ -3,7 +3,8 @@ params_phys-y := 0x80000100
> initrd_phys-y := 0x80800000
>
> dtb-$(CONFIG_SOC_OMAP2420) += omap2420-h4.dtb
> -dtb-$(CONFIG_ARCH_OMAP3) += omap3-beagle-xm.dtb omap3-evm.dtb
> +dtb-$(CONFIG_ARCH_OMAP3) += omap3-beagle.dtb omap3-beagle-xm.dtb \
> + omap3-evm.dtb
> dtb-$(CONFIG_ARCH_OMAP4) += omap4-panda.dtb omap4-pandaES.dtb
> dtb-$(CONFIG_ARCH_OMAP4) += omap4-var_som.dtb omap4-sdp.dtb
> dtb-$(CONFIG_SOC_OMAP5) += omap5-evm.dtb
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] arm/dts: Add omap3-beagle.dts
2012-09-11 11:29 ` Benoit Cousson
@ 2012-09-11 11:57 ` Benoit Cousson
0 siblings, 0 replies; 3+ messages in thread
From: Benoit Cousson @ 2012-09-11 11:57 UTC (permalink / raw)
To: Jon Hunter; +Cc: device-tree, linux-omap, linux-arm
On 09/11/2012 01:29 PM, Benoit Cousson wrote:
> Hi Jon,
>
> On 09/11/2012 12:57 AM, Jon Hunter wrote:
>> Add a minimal dts for original OMAP3430/3530 version of the Beagle board. This
>> version of the Beagle board has 256MB of DDR and features the same TWL4030
>> power management IC (PMIC) as the Beagle board XM.
>
> Thanks for the patch.
>
>> Given that the Beagle and Beagle-XM boards use the same PMIC, move the
>> definition of the VSIM regulator into the TWL4030.dtsi file so that we do not
>> need to duplicate in the Beagle board dts file.
>
> Good, catch, regulator definition has indeed nothing to do outside the
> twl4030.dtsi.
>
>> This has been boot tested on an OMAP3530 Beagle board and verifing that the
>> SD/MMC interface is working with a SD card.
>>
>> This patch is generated on top of Tony's patch for adding the Beagle board XM
>> dts file [1].
>
> Tony has just updated his devel-dt with the DTS series I pushed plus the
> beagle-xm introduction, so I'm gonna put this one on top and built a
> for_3.7/dts_part2 branch sinec there are a couplf of USB / AM33xx pending.
OK, so in fact, it does not apply very well due to all the changes I
introduced in my for_3.7/dts pull and then the beagle is now missing all
the LEDs support recently added.
So you should refresh that patch taking the latest devel-dt branch as a
base and copying the latest beagle-xm.dts file.
>> diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot
>> index 0e602b7..a469a55 100644
>> --- a/arch/arm/mach-omap2/Makefile.boot
>> +++ b/arch/arm/mach-omap2/Makefile.boot
>> @@ -3,7 +3,8 @@ params_phys-y := 0x80000100
>> initrd_phys-y := 0x80800000
>>
>> dtb-$(CONFIG_SOC_OMAP2420) += omap2420-h4.dtb
>> -dtb-$(CONFIG_ARCH_OMAP3) += omap3-beagle-xm.dtb omap3-evm.dtb
>> +dtb-$(CONFIG_ARCH_OMAP3) += omap3-beagle.dtb omap3-beagle-xm.dtb \
>> + omap3-evm.dtb
You'd better duplicate the whole line like it is done for OMAP4 instead
of using the "\"
+dtb-$(CONFIG_ARCH_OMAP3) += omap3-evm.dtb
Regards,
Benoit
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-09-11 11:57 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-09-10 22:57 [PATCH] arm/dts: Add omap3-beagle.dts Jon Hunter
2012-09-11 11:29 ` Benoit Cousson
2012-09-11 11:57 ` Benoit Cousson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).