[PATCH V4 0/7] ARM: AM33XX: net: Add DT support to CPGMAC and MDIO driver

[PATCH V4 0/7] ARM: AM33XX: net: Add DT support to CPGMAC and MDIO driver

[Mugunthan V N]

This patch-series adds support for,

[1/7]: Typo mistake in CPSW driver while invoking runtime_pm api's

[2/7]: Adds parent<->child relation between CPSW & MDIO module inside cpsw
       driver, as in case of AM33XX, the resources are shared and common
       register bit-field is provided to control module/clock enable/disable,
       makes it difficult to handle common resource.

       So the solution here is, to create parent<->child relation between them.

[3/7]: Add hwmod entry for MDIO module, required for MDIO driver.

[4/7]: cpsw: simplify the setup of the register pointers

[5/7]: Add DT device nodes for both CPSW and MDIO modules in am33xx.dtsi,
       am335x-evm.dts and am335x-bone.dts file

[6/7]: Enable CPSW support to omap2plus_defconfig

[7/7]: cpsw: Kernel warn fix during suspend

This patch series has been created on top of net-next/master and tested
on BeagleBone platform for NFS boot and basic ping test cases.

Changes from V3:
* Removed unnecessary flags in Davinci MDIO Hwmod entry.

Mugunthan V N (4):
  ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio module
  arm/dts: am33xx: Add CPSW and MDIO module nodes for AM33XX
  ARM: OMAP2+: omap2plus_defconfig: Enable CPSW support
  net: cpsw: halt network stack before halting the device during
    suspend

Richard Cochran (1):
  cpsw: simplify the setup of the register pointers

Vaibhav Hiremath (2):
  net: davinci_mdio: Fix typo mistake in calling runtime-pm api
  net: cpsw: Add parent<->child relation support between cpsw and mdio

 Documentation/devicetree/bindings/net/cpsw.txt |   34 ----
 arch/arm/boot/dts/am335x-bone.dts              |    8 +
 arch/arm/boot/dts/am335x-evm.dts               |    8 +
 arch/arm/boot/dts/am33xx.dtsi                  |   42 +++++
 arch/arm/configs/omap2plus_defconfig           |    3 +
 arch/arm/mach-omap2/omap_hwmod_33xx_data.c     |   31 ++++
 drivers/net/ethernet/ti/cpsw.c                 |  231 ++++++++++--------------
 drivers/net/ethernet/ti/davinci_mdio.c         |    2 +-
 include/linux/platform_data/cpsw.h             |   19 --
 9 files changed, 192 insertions(+), 186 deletions(-)

[PATCH V4 1/7] net: davinci_mdio: Fix typo mistake in calling runtime-pm api

[Mugunthan V N]

From: Vaibhav Hiremath <hvaibhav@ti.com>

By mistake (most likely a copy-paste), instead of pm_runtime_get_sync()
api, driver is calling pm_runtime_put_sync() api in resume callback
function. The bug was introduced by commit id (ae2c07aaf74:
davinci_mdio: runtime PM support).

Now, the reason why it didn't impact functionality is, the patch has
been tested on AM335x-EVM and BeagleBone platform while submitting;
and in case of AM335x the MDIO driver doesn't control the module
enable/disable part, which is handled by CPSW driver.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Richard Cochran <richardcochran@gmail.com>
---
 drivers/net/ethernet/ti/davinci_mdio.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c
index 51a96db..ae74280 100644
--- a/drivers/net/ethernet/ti/davinci_mdio.c
+++ b/drivers/net/ethernet/ti/davinci_mdio.c
@@ -465,7 +465,7 @@ static int davinci_mdio_resume(struct device *dev)
 	u32 ctrl;
 
 	spin_lock(&data->lock);
-	pm_runtime_put_sync(data->dev);
+	pm_runtime_get_sync(data->dev);
 
 	/* restart the scan state machine */
 	ctrl = __raw_readl(&data->regs->control);
-- 
1.7.0.4

[PATCH V4 2/7] net: cpsw: Add parent<->child relation support between cpsw and mdio

[Mugunthan V N]

From: Vaibhav Hiremath <hvaibhav@ti.com>

CPGMAC SubSystem consist of various sub-modules, like, mdio, cpdma,
cpsw, etc... These sub-modules are also used in some of Davinci family
of devices. Now based on requirement, use-case and available technology
nodes the integration of these sub-modules varies across devices.

So coming back to Linux net driver, currently separate and independent
platform devices & drivers for CPSW and MDIO is implemented. In case of
Davinci they both has separate control, from resources perspective,
like clock.

In case of AM33XX, the resources are shared and only one register
bit-field is provided to control module/clock enable/disable, makes it
difficult to handle common resource.

So the solution here implemented in this patch is,

Create parent<->child relationship between both the drivers, making
CPSW as a parent and MDIO as its child and enumerate all the child nodes
under CPSW module.
Both the drivers will function exactly the way it was operating before,
including runtime-pm functionality. No change is required in MDIO driver
(for that matter to any child driver).

As this is only supported during DT boot, the parent<->child relationship
is created and populated in DT execution flow. The only required change
is inside DTS file, making MDIO as a child to CPSW node.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Richard Cochran <richardcochran@gmail.com>
---
 drivers/net/ethernet/ti/cpsw.c |   16 ++++++++++++++--
 1 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 7654a62..7007aba 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -1144,7 +1144,7 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
 	}
 	data->mac_control = prop;
 
-	for_each_child_of_node(node, slave_node) {
+	for_each_node_by_name(slave_node, "slave") {
 		struct cpsw_slave_data *slave_data = data->slave_data + i;
 		const char *phy_id = NULL;
 		const void *mac_addr = NULL;
@@ -1179,6 +1179,14 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
 		i++;
 	}
 
+	/*
+	 * Populate all the child nodes here...
+	 */
+	ret = of_platform_populate(node, NULL, NULL, &pdev->dev);
+	/* We do not want to force this, as in some cases may not have child */
+	if (ret)
+		pr_warn("Doesn't have any child node\n");
+
 	return 0;
 
 error_ret:
@@ -1212,6 +1220,11 @@ static int __devinit cpsw_probe(struct platform_device *pdev)
 	priv->msg_enable = netif_msg_init(debug_level, CPSW_DEBUG);
 	priv->rx_packet_max = max(rx_packet_max, 128);
 
+	/*
+	 * This may be required here for child devices.
+	 */
+	pm_runtime_enable(&pdev->dev);
+
 	if (cpsw_probe_dt(&priv->data, pdev)) {
 		pr_err("cpsw: platform data missing\n");
 		ret = -ENODEV;
@@ -1238,7 +1251,6 @@ static int __devinit cpsw_probe(struct platform_device *pdev)
 	for (i = 0; i < data->slaves; i++)
 		priv->slaves[i].slave_num = i;
 
-	pm_runtime_enable(&pdev->dev);
 	priv->clk = clk_get(&pdev->dev, "fck");
 	if (IS_ERR(priv->clk)) {
 		dev_err(&pdev->dev, "fck is not found\n");
-- 
1.7.0.4

[PATCH V4 3/7] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio module

[Mugunthan V N]

This patch adds hwmod entry for davinci MDIO module,
creating parent<->child relationship between CPSW and MDIO module.

This Parent-child relation is required in order to use common resources
like, clock, but still maintaining the logical separation between them.

CPGMAC SubSystem consist of various sub-modules, like, mdio, cpdma,
cpsw, etc... These sub-modules are also used in some of Davinci
family of devices, so separate and independent platform devices &
drivers for CPSW and MDIO is implemented.
In case of AM33XX, the resources are shared and common register
bit-field is provided to control module/clock enable/disable,
makes it difficult to handle common resources from both drivers.

So the solution is, create parent<->child relationship between
CPGMAC & MDIO modules.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Richard Cochran <richardcochran@gmail.com>
---
 arch/arm/mach-omap2/omap_hwmod_33xx_data.c |   31 ++++++++++++++++++++++++++++
 1 files changed, 31 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 59d5c1c..3125835 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -674,6 +674,7 @@ static struct omap_hwmod am33xx_cpgmac0_hwmod = {
 	.name		= "cpgmac0",
 	.class		= &am33xx_cpgmac0_hwmod_class,
 	.clkdm_name	= "cpsw_125mhz_clkdm",
+	.flags		= (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
 	.mpu_irqs	= am33xx_cpgmac0_irqs,
 	.main_clk	= "cpsw_125mhz_gclk",
 	.prcm		= {
@@ -685,6 +686,20 @@ static struct omap_hwmod am33xx_cpgmac0_hwmod = {
 };
 
 /*
+ * mdio class
+ */
+static struct omap_hwmod_class am33xx_mdio_hwmod_class = {
+	.name		= "davinci_mdio",
+};
+
+static struct omap_hwmod am33xx_mdio_hwmod = {
+	.name		= "davinci_mdio",
+	.class		= &am33xx_mdio_hwmod_class,
+	.clkdm_name	= "cpsw_125mhz_clkdm",
+	.main_clk	= "cpsw_125mhz_gclk",
+};
+
+/*
  * dcan class
  */
 static struct omap_hwmod_class am33xx_dcan_hwmod_class = {
@@ -2501,6 +2516,21 @@ static struct omap_hwmod_ocp_if am33xx_l4_hs__cpgmac0 = {
 	.user		= OCP_USER_MPU,
 };
 
+struct omap_hwmod_addr_space am33xx_mdio_addr_space[] = {
+	{
+		.pa_start	= 0x4A101000,
+		.pa_end		= 0x4A101000 + SZ_256 - 1,
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = {
+	.master		= &am33xx_cpgmac0_hwmod,
+	.slave		= &am33xx_mdio_hwmod,
+	.addr		= am33xx_mdio_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
 static struct omap_hwmod_addr_space am33xx_elm_addr_space[] = {
 	{
 		.pa_start	= 0x48080000,
@@ -3371,6 +3401,7 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
 	&am33xx_l3_main__tptc2,
 	&am33xx_l3_s__usbss,
 	&am33xx_l4_hs__cpgmac0,
+	&am33xx_cpgmac0__mdio,
 	NULL,
 };
 
-- 
1.7.0.4

[PATCH V4 4/7] cpsw: simplify the setup of the register pointers

[Mugunthan V N]

From: Richard Cochran <richardcochran@gmail.com>

Instead of having a host of different register offsets in the device tree,
this patch simplifies the CPSW code by letting the driver set the proper
register offsets automatically, based on the CPSW version.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
---
 Documentation/devicetree/bindings/net/cpsw.txt |   34 ----
 drivers/net/ethernet/ti/cpsw.c                 |  209 +++++++++--------------
 include/linux/platform_data/cpsw.h             |   19 --
 3 files changed, 82 insertions(+), 180 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index 2214607..6cf5d92 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -9,15 +9,7 @@ Required properties:
 			  number
 - interrupt-parent	: The parent interrupt controller
 - cpdma_channels 	: Specifies number of channels in CPDMA
-- host_port_no		: Specifies host port shift
-- cpdma_reg_ofs		: Specifies CPDMA submodule register offset
-- cpdma_sram_ofs	: Specifies CPDMA SRAM offset
-- ale_reg_ofs		: Specifies ALE submodule register offset
 - ale_entries		: Specifies No of entries ALE can hold
-- host_port_reg_ofs	: Specifies host port register offset
-- hw_stats_reg_ofs	: Specifies hardware statistics register offset
-- cpts_reg_ofs		: Specifies the offset of the CPTS registers
-- bd_ram_ofs		: Specifies internal desciptor RAM offset
 - bd_ram_size		: Specifies internal descriptor RAM size
 - rx_descs		: Specifies number of Rx descriptors
 - mac_control		: Specifies Default MAC control register content
@@ -26,8 +18,6 @@ Required properties:
 - cpts_active_slave	: Specifies the slave to use for time stamping
 - cpts_clock_mult	: Numerator to convert input clock ticks into nanoseconds
 - cpts_clock_shift	: Denominator to convert input clock ticks into nanoseconds
-- slave_reg_ofs		: Specifies slave register offset
-- sliver_reg_ofs	: Specifies slave sliver register offset
 - phy_id		: Specifies slave phy id
 - mac-address		: Specifies slave MAC address
 
@@ -49,15 +39,7 @@ Examples:
 		interrupts = <55 0x4>;
 		interrupt-parent = <&intc>;
 		cpdma_channels = <8>;
-		host_port_no = <0>;
-		cpdma_reg_ofs = <0x800>;
-		cpdma_sram_ofs = <0xa00>;
-		ale_reg_ofs = <0xd00>;
 		ale_entries = <1024>;
-		host_port_reg_ofs = <0x108>;
-		hw_stats_reg_ofs = <0x900>;
-		cpts_reg_ofs = <0xc00>;
-		bd_ram_ofs = <0x2000>;
 		bd_ram_size = <0x2000>;
 		no_bd_ram = <0>;
 		rx_descs = <64>;
@@ -67,15 +49,11 @@ Examples:
 		cpts_clock_mult = <0x80000000>;
 		cpts_clock_shift = <29>;
 		cpsw_emac0: slave@0 {
-			slave_reg_ofs = <0x200>;
-			sliver_reg_ofs = <0xd80>;
 			phy_id = "davinci_mdio.16:00";
 			/* Filled in by U-Boot */
 			mac-address = [ 00 00 00 00 00 00 ];
 		};
 		cpsw_emac1: slave@1 {
-			slave_reg_ofs = <0x300>;
-			sliver_reg_ofs = <0xdc0>;
 			phy_id = "davinci_mdio.16:01";
 			/* Filled in by U-Boot */
 			mac-address = [ 00 00 00 00 00 00 ];
@@ -87,15 +65,7 @@ Examples:
 		compatible = "ti,cpsw";
 		ti,hwmods = "cpgmac0";
 		cpdma_channels = <8>;
-		host_port_no = <0>;
-		cpdma_reg_ofs = <0x800>;
-		cpdma_sram_ofs = <0xa00>;
-		ale_reg_ofs = <0xd00>;
 		ale_entries = <1024>;
-		host_port_reg_ofs = <0x108>;
-		hw_stats_reg_ofs = <0x900>;
-		cpts_reg_ofs = <0xc00>;
-		bd_ram_ofs = <0x2000>;
 		bd_ram_size = <0x2000>;
 		no_bd_ram = <0>;
 		rx_descs = <64>;
@@ -105,15 +75,11 @@ Examples:
 		cpts_clock_mult = <0x80000000>;
 		cpts_clock_shift = <29>;
 		cpsw_emac0: slave@0 {
-			slave_reg_ofs = <0x200>;
-			sliver_reg_ofs = <0xd80>;
 			phy_id = "davinci_mdio.16:00";
 			/* Filled in by U-Boot */
 			mac-address = [ 00 00 00 00 00 00 ];
 		};
 		cpsw_emac1: slave@1 {
-			slave_reg_ofs = <0x300>;
-			sliver_reg_ofs = <0xdc0>;
 			phy_id = "davinci_mdio.16:01";
 			/* Filled in by U-Boot */
 			mac-address = [ 00 00 00 00 00 00 ];
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 7007aba..f94aa8f 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -80,6 +80,29 @@ do {								\
 
 #define CPSW_VERSION_1		0x19010a
 #define CPSW_VERSION_2		0x19010c
+
+#define HOST_PORT_NUM		0
+#define SLIVER_SIZE		0x40
+
+#define CPSW1_HOST_PORT_OFFSET	0x028
+#define CPSW1_SLAVE_OFFSET	0x050
+#define CPSW1_SLAVE_SIZE	0x040
+#define CPSW1_CPDMA_OFFSET	0x100
+#define CPSW1_STATERAM_OFFSET	0x200
+#define CPSW1_CPTS_OFFSET	0x500
+#define CPSW1_ALE_OFFSET	0x600
+#define CPSW1_SLIVER_OFFSET	0x700
+
+#define CPSW2_HOST_PORT_OFFSET	0x108
+#define CPSW2_SLAVE_OFFSET	0x200
+#define CPSW2_SLAVE_SIZE	0x100
+#define CPSW2_CPDMA_OFFSET	0x800
+#define CPSW2_STATERAM_OFFSET	0xa00
+#define CPSW2_CPTS_OFFSET	0xc00
+#define CPSW2_ALE_OFFSET	0xd00
+#define CPSW2_SLIVER_OFFSET	0xd80
+#define CPSW2_BD_OFFSET		0x2000
+
 #define CPDMA_RXTHRESH		0x0c0
 #define CPDMA_RXFREE		0x0e0
 #define CPDMA_TXHDP		0x00
@@ -87,21 +110,6 @@ do {								\
 #define CPDMA_TXCP		0x40
 #define CPDMA_RXCP		0x60
 
-#define cpsw_dma_regs(base, offset)		\
-	(void __iomem *)((base) + (offset))
-#define cpsw_dma_rxthresh(base, offset)		\
-	(void __iomem *)((base) + (offset) + CPDMA_RXTHRESH)
-#define cpsw_dma_rxfree(base, offset)		\
-	(void __iomem *)((base) + (offset) + CPDMA_RXFREE)
-#define cpsw_dma_txhdp(base, offset)		\
-	(void __iomem *)((base) + (offset) + CPDMA_TXHDP)
-#define cpsw_dma_rxhdp(base, offset)		\
-	(void __iomem *)((base) + (offset) + CPDMA_RXHDP)
-#define cpsw_dma_txcp(base, offset)		\
-	(void __iomem *)((base) + (offset) + CPDMA_TXCP)
-#define cpsw_dma_rxcp(base, offset)		\
-	(void __iomem *)((base) + (offset) + CPDMA_RXCP)
-
 #define CPSW_POLL_WEIGHT	64
 #define CPSW_MIN_PACKET_SIZE	60
 #define CPSW_MAX_PACKET_SIZE	(1500 + 14 + 4 + 4)
@@ -629,8 +637,7 @@ static int cpsw_ndo_open(struct net_device *ndev)
 
 	pm_runtime_get_sync(&priv->pdev->dev);
 
-	reg = __raw_readl(&priv->regs->id_ver);
-	priv->version = reg;
+	reg = priv->version;
 
 	dev_info(priv->dev, "initializing cpsw version %d.%d (%d)\n",
 		 CPSW_MAJOR_VERSION(reg), CPSW_MINOR_VERSION(reg),
@@ -995,15 +1002,16 @@ static const struct ethtool_ops cpsw_ethtool_ops = {
 	.get_ts_info	= cpsw_get_ts_info,
 };
 
-static void cpsw_slave_init(struct cpsw_slave *slave, struct cpsw_priv *priv)
+static void cpsw_slave_init(struct cpsw_slave *slave, struct cpsw_priv *priv,
+			    u32 slave_reg_ofs, u32 sliver_reg_ofs)
 {
 	void __iomem		*regs = priv->regs;
 	int			slave_num = slave->slave_num;
 	struct cpsw_slave_data	*data = priv->data.slave_data + slave_num;
 
 	slave->data	= data;
-	slave->regs	= regs + data->slave_reg_ofs;
-	slave->sliver	= regs + data->sliver_reg_ofs;
+	slave->regs	= regs + slave_reg_ofs;
+	slave->sliver	= regs + sliver_reg_ofs;
 }
 
 static int cpsw_probe_dt(struct cpsw_platform_data *data,
@@ -1051,8 +1059,6 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
 		return -EINVAL;
 	}
 
-	data->no_bd_ram = of_property_read_bool(node, "no_bd_ram");
-
 	if (of_property_read_u32(node, "cpdma_channels", &prop)) {
 		pr_err("Missing cpdma_channels property in the DT.\n");
 		ret = -EINVAL;
@@ -1060,34 +1066,6 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
 	}
 	data->channels = prop;
 
-	if (of_property_read_u32(node, "host_port_no", &prop)) {
-		pr_err("Missing host_port_no property in the DT.\n");
-		ret = -EINVAL;
-		goto error_ret;
-	}
-	data->host_port_num = prop;
-
-	if (of_property_read_u32(node, "cpdma_reg_ofs", &prop)) {
-		pr_err("Missing cpdma_reg_ofs property in the DT.\n");
-		ret = -EINVAL;
-		goto error_ret;
-	}
-	data->cpdma_reg_ofs = prop;
-
-	if (of_property_read_u32(node, "cpdma_sram_ofs", &prop)) {
-		pr_err("Missing cpdma_sram_ofs property in the DT.\n");
-		ret = -EINVAL;
-		goto error_ret;
-	}
-	data->cpdma_sram_ofs = prop;
-
-	if (of_property_read_u32(node, "ale_reg_ofs", &prop)) {
-		pr_err("Missing ale_reg_ofs property in the DT.\n");
-		ret = -EINVAL;
-		goto error_ret;
-	}
-	data->ale_reg_ofs = prop;
-
 	if (of_property_read_u32(node, "ale_entries", &prop)) {
 		pr_err("Missing ale_entries property in the DT.\n");
 		ret = -EINVAL;
@@ -1095,34 +1073,6 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
 	}
 	data->ale_entries = prop;
 
-	if (of_property_read_u32(node, "host_port_reg_ofs", &prop)) {
-		pr_err("Missing host_port_reg_ofs property in the DT.\n");
-		ret = -EINVAL;
-		goto error_ret;
-	}
-	data->host_port_reg_ofs = prop;
-
-	if (of_property_read_u32(node, "hw_stats_reg_ofs", &prop)) {
-		pr_err("Missing hw_stats_reg_ofs property in the DT.\n");
-		ret = -EINVAL;
-		goto error_ret;
-	}
-	data->hw_stats_reg_ofs = prop;
-
-	if (of_property_read_u32(node, "cpts_reg_ofs", &prop)) {
-		pr_err("Missing cpts_reg_ofs property in the DT.\n");
-		ret = -EINVAL;
-		goto error_ret;
-	}
-	data->cpts_reg_ofs = prop;
-
-	if (of_property_read_u32(node, "bd_ram_ofs", &prop)) {
-		pr_err("Missing bd_ram_ofs property in the DT.\n");
-		ret = -EINVAL;
-		goto error_ret;
-	}
-	data->bd_ram_ofs = prop;
-
 	if (of_property_read_u32(node, "bd_ram_size", &prop)) {
 		pr_err("Missing bd_ram_size property in the DT.\n");
 		ret = -EINVAL;
@@ -1156,22 +1106,6 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
 		}
 		slave_data->phy_id = phy_id;
 
-		if (of_property_read_u32(slave_node, "slave_reg_ofs", &prop)) {
-			pr_err("Missing slave[%d] slave_reg_ofs property\n", i);
-			ret = -EINVAL;
-			goto error_ret;
-		}
-		slave_data->slave_reg_ofs = prop;
-
-		if (of_property_read_u32(slave_node, "sliver_reg_ofs",
-					 &prop)) {
-			pr_err("Missing slave[%d] sliver_reg_ofs property\n",
-				i);
-			ret = -EINVAL;
-			goto error_ret;
-		}
-		slave_data->sliver_reg_ofs = prop;
-
 		mac_addr = of_get_mac_address(slave_node);
 		if (mac_addr)
 			memcpy(slave_data->mac_addr, mac_addr, ETH_ALEN);
@@ -1201,8 +1135,9 @@ static int __devinit cpsw_probe(struct platform_device *pdev)
 	struct cpsw_priv		*priv;
 	struct cpdma_params		dma_params;
 	struct cpsw_ale_params		ale_params;
-	void __iomem			*regs;
+	void __iomem			*ss_regs, *wr_regs;
 	struct resource			*res;
+	u32 slave_offset, sliver_offset, slave_size;
 	int ret = 0, i, k = 0;
 
 	ndev = alloc_etherdev(sizeof(struct cpsw_priv));
@@ -1270,15 +1205,14 @@ static int __devinit cpsw_probe(struct platform_device *pdev)
 		ret = -ENXIO;
 		goto clean_clk_ret;
 	}
-	regs = ioremap(priv->cpsw_res->start, resource_size(priv->cpsw_res));
-	if (!regs) {
+	ss_regs = ioremap(priv->cpsw_res->start, resource_size(priv->cpsw_res));
+	if (!ss_regs) {
 		dev_err(priv->dev, "unable to map i/o region\n");
 		goto clean_cpsw_iores_ret;
 	}
-	priv->regs = regs;
-	priv->host_port = data->host_port_num;
-	priv->host_port_regs = regs + data->host_port_reg_ofs;
-	priv->cpts.reg = regs + data->cpts_reg_ofs;
+	priv->regs = ss_regs;
+	priv->version = __raw_readl(&priv->regs->id_ver);
+	priv->host_port = HOST_PORT_NUM;
 
 	priv->cpsw_wr_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	if (!priv->cpsw_wr_res) {
@@ -1292,32 +1226,59 @@ static int __devinit cpsw_probe(struct platform_device *pdev)
 		ret = -ENXIO;
 		goto clean_iomap_ret;
 	}
-	regs = ioremap(priv->cpsw_wr_res->start,
+	wr_regs = ioremap(priv->cpsw_wr_res->start,
 				resource_size(priv->cpsw_wr_res));
-	if (!regs) {
+	if (!wr_regs) {
 		dev_err(priv->dev, "unable to map i/o region\n");
 		goto clean_cpsw_wr_iores_ret;
 	}
-	priv->wr_regs = regs;
-
-	for_each_slave(priv, cpsw_slave_init, priv);
+	priv->wr_regs = wr_regs;
 
 	memset(&dma_params, 0, sizeof(dma_params));
+	memset(&ale_params, 0, sizeof(ale_params));
+
+	switch (priv->version) {
+	case CPSW_VERSION_1:
+		priv->host_port_regs = ss_regs + CPSW1_HOST_PORT_OFFSET;
+		priv->cpts.reg       = ss_regs + CPSW1_CPTS_OFFSET;
+		dma_params.dmaregs   = ss_regs + CPSW1_CPDMA_OFFSET;
+		dma_params.txhdp     = ss_regs + CPSW1_STATERAM_OFFSET;
+		ale_params.ale_regs  = ss_regs + CPSW1_ALE_OFFSET;
+		slave_offset         = CPSW1_SLAVE_OFFSET;
+		slave_size           = CPSW1_SLAVE_SIZE;
+		sliver_offset        = CPSW1_SLIVER_OFFSET;
+		dma_params.desc_mem_phys = 0;
+		break;
+	case CPSW_VERSION_2:
+		priv->host_port_regs = ss_regs + CPSW2_HOST_PORT_OFFSET;
+		priv->cpts.reg       = ss_regs + CPSW2_CPTS_OFFSET;
+		dma_params.dmaregs   = ss_regs + CPSW2_CPDMA_OFFSET;
+		dma_params.txhdp     = ss_regs + CPSW2_STATERAM_OFFSET;
+		ale_params.ale_regs  = ss_regs + CPSW2_ALE_OFFSET;
+		slave_offset         = CPSW2_SLAVE_OFFSET;
+		slave_size           = CPSW2_SLAVE_SIZE;
+		sliver_offset        = CPSW2_SLIVER_OFFSET;
+		dma_params.desc_mem_phys =
+			(u32 __force) priv->cpsw_res->start + CPSW2_BD_OFFSET;
+		break;
+	default:
+		dev_err(priv->dev, "unknown version 0x%08x\n", priv->version);
+		ret = -ENODEV;
+		goto clean_cpsw_wr_iores_ret;
+	}
+	for (i = 0; i < priv->data.slaves; i++) {
+		struct cpsw_slave *slave = &priv->slaves[i];
+		cpsw_slave_init(slave, priv, slave_offset, sliver_offset);
+		slave_offset  += slave_size;
+		sliver_offset += SLIVER_SIZE;
+	}
+
 	dma_params.dev		= &pdev->dev;
-	dma_params.dmaregs	= cpsw_dma_regs((u32)priv->regs,
-						data->cpdma_reg_ofs);
-	dma_params.rxthresh	= cpsw_dma_rxthresh((u32)priv->regs,
-						    data->cpdma_reg_ofs);
-	dma_params.rxfree	= cpsw_dma_rxfree((u32)priv->regs,
-						  data->cpdma_reg_ofs);
-	dma_params.txhdp	= cpsw_dma_txhdp((u32)priv->regs,
-						 data->cpdma_sram_ofs);
-	dma_params.rxhdp	= cpsw_dma_rxhdp((u32)priv->regs,
-						 data->cpdma_sram_ofs);
-	dma_params.txcp		= cpsw_dma_txcp((u32)priv->regs,
-						data->cpdma_sram_ofs);
-	dma_params.rxcp		= cpsw_dma_rxcp((u32)priv->regs,
-						data->cpdma_sram_ofs);
+	dma_params.rxthresh	= dma_params.dmaregs + CPDMA_RXTHRESH;
+	dma_params.rxfree	= dma_params.dmaregs + CPDMA_RXFREE;
+	dma_params.rxhdp	= dma_params.txhdp + CPDMA_RXHDP;
+	dma_params.txcp		= dma_params.txhdp + CPDMA_TXCP;
+	dma_params.rxcp		= dma_params.txhdp + CPDMA_RXCP;
 
 	dma_params.num_chan		= data->channels;
 	dma_params.has_soft_reset	= true;
@@ -1325,10 +1286,7 @@ static int __devinit cpsw_probe(struct platform_device *pdev)
 	dma_params.desc_mem_size	= data->bd_ram_size;
 	dma_params.desc_align		= 16;
 	dma_params.has_ext_regs		= true;
-	dma_params.desc_mem_phys        = data->no_bd_ram ? 0 :
-			(u32 __force)priv->cpsw_res->start + data->bd_ram_ofs;
-	dma_params.desc_hw_addr         = data->hw_ram_addr ?
-			data->hw_ram_addr : dma_params.desc_mem_phys ;
+	dma_params.desc_hw_addr         = dma_params.desc_mem_phys;
 
 	priv->dma = cpdma_ctlr_create(&dma_params);
 	if (!priv->dma) {
@@ -1348,10 +1306,7 @@ static int __devinit cpsw_probe(struct platform_device *pdev)
 		goto clean_dma_ret;
 	}
 
-	memset(&ale_params, 0, sizeof(ale_params));
 	ale_params.dev			= &ndev->dev;
-	ale_params.ale_regs		= (void *)((u32)priv->regs) +
-						((u32)data->ale_reg_ofs);
 	ale_params.ale_ageout		= ale_ageout;
 	ale_params.ale_entries		= data->ale_entries;
 	ale_params.ale_ports		= data->slaves;
diff --git a/include/linux/platform_data/cpsw.h b/include/linux/platform_data/cpsw.h
index b5c16c3..4b0ed74 100644
--- a/include/linux/platform_data/cpsw.h
+++ b/include/linux/platform_data/cpsw.h
@@ -18,8 +18,6 @@
 #include <linux/if_ether.h>
 
 struct cpsw_slave_data {
-	u32		slave_reg_ofs;
-	u32		sliver_reg_ofs;
 	const char	*phy_id;
 	int		phy_if;
 	u8		mac_addr[ETH_ALEN];
@@ -28,31 +26,14 @@ struct cpsw_slave_data {
 struct cpsw_platform_data {
 	u32	ss_reg_ofs;	/* Subsystem control register offset */
 	u32	channels;	/* number of cpdma channels (symmetric) */
-	u32	cpdma_reg_ofs;	/* cpdma register offset */
-	u32	cpdma_sram_ofs;	/* cpdma sram offset */
-
 	u32	slaves;		/* number of slave cpgmac ports */
 	struct cpsw_slave_data	*slave_data;
 	u32	cpts_active_slave; /* time stamping slave */
 	u32	cpts_clock_mult;  /* convert input clock ticks to nanoseconds */
 	u32	cpts_clock_shift; /* convert input clock ticks to nanoseconds */
-
-	u32	ale_reg_ofs;	/* address lookup engine reg offset */
 	u32	ale_entries;	/* ale table size */
-
-	u32	host_port_reg_ofs; /* cpsw cpdma host port registers */
-	u32     host_port_num; /* The port number for the host port */
-
-	u32	hw_stats_reg_ofs;  /* cpsw hardware statistics counters */
-	u32	cpts_reg_ofs;      /* cpts registers */
-
-	u32	bd_ram_ofs;   /* embedded buffer descriptor RAM offset*/
 	u32	bd_ram_size;  /*buffer descriptor ram size */
-	u32	hw_ram_addr; /*if the HW address for BD RAM is different */
-	bool	no_bd_ram; /* no embedded BD ram*/
-
 	u32	rx_descs;	/* Number of Rx Descriptios */
-
 	u32	mac_control;	/* Mac control register */
 };
 
-- 
1.7.0.4

[PATCH V4 5/7] arm/dts: am33xx: Add CPSW and MDIO module nodes for AM33XX

[Mugunthan V N]

Add CPSW and MDIO related device tree data for AM33XX.
Also enable them into board/evm dts files by providing
respective phy-id.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Richard Cochran <richardcochran@gmail.com>
---
 arch/arm/boot/dts/am335x-bone.dts |    8 +++++++
 arch/arm/boot/dts/am335x-evm.dts  |    8 +++++++
 arch/arm/boot/dts/am33xx.dtsi     |   42 +++++++++++++++++++++++++++++++++++++
 3 files changed, 58 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index c634f87..e233cfa 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -78,3 +78,11 @@
 		};
 	};
 };
+
+&cpsw_emac0 {
+	phy_id = "4a101000.mdio:00";
+};
+
+&cpsw_emac1 {
+	phy_id = "4a101000.mdio:01";
+};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 185d632..415c3b3 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -118,3 +118,11 @@
 		};
 	};
 };
+
+&cpsw_emac0 {
+	phy_id = "4a101000.mdio:00";
+};
+
+&cpsw_emac1 {
+	phy_id = "4a101000.mdio:01";
+};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index bb31bff..2a0c8fe 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -210,5 +210,47 @@
 			interrupt-parent = <&intc>;
 			interrupts = <91>;
 		};
+
+		mac: ethernet@4A100000 {
+			compatible = "ti,cpsw";
+			ti,hwmods = "cpgmac0";
+			cpdma_channels = <8>;
+			ale_entries = <1024>;
+			bd_ram_size = <0x2000>;
+			no_bd_ram = <0>;
+			rx_descs = <64>;
+			mac_control = <0x20>;
+			slaves = <2>;
+			cpts_active_slave = <0>;
+			cpts_clock_mult = <0x80000000>;
+			cpts_clock_shift = <29>;
+			reg = <0x4a100000 0x800
+				0x4a101200 0x100
+				0x4a101000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-parent = <&intc>;
+			/* c0_rx_thresh_pend c0_rx_pend c0_tx_pend c0_misc_pend*/
+			interrupts = <40 41 42 43>;
+			ranges;
+			cpsw_emac0: slave@0 {
+				phy_id = "davinci_mdio.16:00";
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+			cpsw_emac1: slave@1 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			davinci_mdio: mdio@4a101000 {
+				compatible = "ti,davinci_mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,hwmods = "davinci_mdio";
+				bus_freq = <1000000>;
+				reg = <0x4a101000 0x100>;
+			};
+		};
 	};
 };
-- 
1.7.0.4

[PATCH V4 6/7] ARM: OMAP2+: omap2plus_defconfig: Enable CPSW support

[Mugunthan V N]

Enable CPSW support in defconfig which is present in AM33xx SoC

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
---
 arch/arm/configs/omap2plus_defconfig |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index a4b330e..41b595e 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -242,3 +242,6 @@ CONFIG_CRC_ITU_T=y
 CONFIG_CRC7=y
 CONFIG_LIBCRC32C=y
 CONFIG_SOC_OMAP5=y
+CONFIG_TI_DAVINCI_MDIO=y
+CONFIG_TI_DAVINCI_CPDMA=y
+CONFIG_TI_CPSW=y
-- 
1.7.0.4

[PATCH V4 7/7] net: cpsw: halt network stack before halting the device during suspend

[Mugunthan V N]

Move network stack halt APIs before halting the hardware to ensure no
packets are queued to hardware during closing the device during
suspend sequence.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
---
 drivers/net/ethernet/ti/cpsw.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index f94aa8f..b46dbb4 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -698,12 +698,12 @@ static int cpsw_ndo_stop(struct net_device *ndev)
 	struct cpsw_priv *priv = netdev_priv(ndev);
 
 	cpsw_info(priv, ifdown, "shutting down cpsw device\n");
-	cpsw_intr_disable(priv);
-	cpdma_ctlr_int_ctrl(priv->dma, false);
-	cpdma_ctlr_stop(priv->dma);
 	netif_stop_queue(priv->ndev);
 	napi_disable(&priv->napi);
 	netif_carrier_off(priv->ndev);
+	cpsw_intr_disable(priv);
+	cpdma_ctlr_int_ctrl(priv->dma, false);
+	cpdma_ctlr_stop(priv->dma);
 	cpsw_ale_stop(priv->ale);
 	for_each_slave(priv, cpsw_slave_stop, priv);
 	pm_runtime_put_sync(&priv->pdev->dev);
-- 
1.7.0.4

Re: [PATCH V4 0/7] ARM: AM33XX: net: Add DT support to CPGMAC and MDIO driver

[Mugunthan V N]

On 11/6/2012 11:02 PM, Mugunthan V N wrote:
> This patch-series adds support for,
>
> [1/7]: Typo mistake in CPSW driver while invoking runtime_pm api's
>
> [2/7]: Adds parent<->child relation between CPSW & MDIO module inside cpsw
>         driver, as in case of AM33XX, the resources are shared and common
>         register bit-field is provided to control module/clock enable/disable,
>         makes it difficult to handle common resource.
>
>         So the solution here is, to create parent<->child relation between them.
>
> [3/7]: Add hwmod entry for MDIO module, required for MDIO driver.
>
> [4/7]: cpsw: simplify the setup of the register pointers
>
> [5/7]: Add DT device nodes for both CPSW and MDIO modules in am33xx.dtsi,
>         am335x-evm.dts and am335x-bone.dts file
>
> [6/7]: Enable CPSW support to omap2plus_defconfig
>
> [7/7]: cpsw: Kernel warn fix during suspend
>
> This patch series has been created on top of net-next/master and tested
> on BeagleBone platform for NFS boot and basic ping test cases.
>
> Changes from V3:
> * Removed unnecessary flags in Davinci MDIO Hwmod entry.
>
> Mugunthan V N (4):
>    ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio module
>    arm/dts: am33xx: Add CPSW and MDIO module nodes for AM33XX
>    ARM: OMAP2+: omap2plus_defconfig: Enable CPSW support
>    net: cpsw: halt network stack before halting the device during
>      suspend
>
> Richard Cochran (1):
>    cpsw: simplify the setup of the register pointers
>
> Vaibhav Hiremath (2):
>    net: davinci_mdio: Fix typo mistake in calling runtime-pm api
>    net: cpsw: Add parent<->child relation support between cpsw and mdio
>
>   Documentation/devicetree/bindings/net/cpsw.txt |   34 ----
>   arch/arm/boot/dts/am335x-bone.dts              |    8 +
>   arch/arm/boot/dts/am335x-evm.dts               |    8 +
>   arch/arm/boot/dts/am33xx.dtsi                  |   42 +++++
>   arch/arm/configs/omap2plus_defconfig           |    3 +
>   arch/arm/mach-omap2/omap_hwmod_33xx_data.c     |   31 ++++
>   drivers/net/ethernet/ti/cpsw.c                 |  231 ++++++++++--------------
>   drivers/net/ethernet/ti/davinci_mdio.c         |    2 +-
>   include/linux/platform_data/cpsw.h             |   19 --
>   9 files changed, 192 insertions(+), 186 deletions(-)
>
Paul/Benoit

Do you any comments

Regards
Mugunthan V N

Re: [PATCH V4 0/7] ARM: AM33XX: net: Add DT support to CPGMAC and MDIO driver

[Benoit Cousson]

Hi Mugunthan,

On 11/07/2012 04:24 PM, Mugunthan V N wrote:
> On 11/6/2012 11:02 PM, Mugunthan V N wrote:
>> This patch-series adds support for,
>>
>> [1/7]: Typo mistake in CPSW driver while invoking runtime_pm api's
>>
>> [2/7]: Adds parent<->child relation between CPSW & MDIO module inside
>> cpsw
>>         driver, as in case of AM33XX, the resources are shared and common
>>         register bit-field is provided to control module/clock
>> enable/disable,
>>         makes it difficult to handle common resource.
>>
>>         So the solution here is, to create parent<->child relation
>> between them.
>>
>> [3/7]: Add hwmod entry for MDIO module, required for MDIO driver.
>>
>> [4/7]: cpsw: simplify the setup of the register pointers
>>
>> [5/7]: Add DT device nodes for both CPSW and MDIO modules in am33xx.dtsi,
>>         am335x-evm.dts and am335x-bone.dts file
>>
>> [6/7]: Enable CPSW support to omap2plus_defconfig
>>
>> [7/7]: cpsw: Kernel warn fix during suspend
>>
>> This patch series has been created on top of net-next/master and tested
>> on BeagleBone platform for NFS boot and basic ping test cases.
>>
>> Changes from V3:
>> * Removed unnecessary flags in Davinci MDIO Hwmod entry.
>>
>> Mugunthan V N (4):
>>    ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio module
>>    arm/dts: am33xx: Add CPSW and MDIO module nodes for AM33XX
>>    ARM: OMAP2+: omap2plus_defconfig: Enable CPSW support
>>    net: cpsw: halt network stack before halting the device during
>>      suspend
>>
>> Richard Cochran (1):
>>    cpsw: simplify the setup of the register pointers
>>
>> Vaibhav Hiremath (2):
>>    net: davinci_mdio: Fix typo mistake in calling runtime-pm api
>>    net: cpsw: Add parent<->child relation support between cpsw and mdio
>>
>>   Documentation/devicetree/bindings/net/cpsw.txt |   34 ----
>>   arch/arm/boot/dts/am335x-bone.dts              |    8 +
>>   arch/arm/boot/dts/am335x-evm.dts               |    8 +
>>   arch/arm/boot/dts/am33xx.dtsi                  |   42 +++++
>>   arch/arm/configs/omap2plus_defconfig           |    3 +
>>   arch/arm/mach-omap2/omap_hwmod_33xx_data.c     |   31 ++++
>>   drivers/net/ethernet/ti/cpsw.c                 |  231
>> ++++++++++--------------
>>   drivers/net/ethernet/ti/davinci_mdio.c         |    2 +-
>>   include/linux/platform_data/cpsw.h             |   19 --
>>   9 files changed, 192 insertions(+), 186 deletions(-)
>>
> Paul/Benoit
> 
> Do you any comments

The DTS looks better thanks to Richard cleanup.
But you did not take into account the minor cosmetic comments I did last
time.

Could you just clean the DTS based on last time comments and change the
subject to be compliant with the other ones and I will take it in my
for_3.8/dts_part2 branch.

Thanks,
Benoit