From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Herring Subject: Re: [PATCH 1/2] of_mdio: Honour "status=disabled" property of device Date: Thu, 29 Nov 2012 11:12:02 -0600 Message-ID: <50B79762.2040009@gmail.com> References: <50B71290.2060200@sysgo.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <50B71290.2060200@sysgo.com> Sender: netdev-owner@vger.kernel.org To: Alexander Sverdlin Cc: Stephen Warren , devicetree-discuss@lists.ozlabs.org, Rob Herring , Grant Likely , netdev@vger.kernel.org, Barry.Song@csr.com, w.sang@pengutronix.de, alexander sverdlin List-Id: devicetree@vger.kernel.org On 11/29/2012 01:45 AM, Alexander Sverdlin wrote: > From: Alexander Sverdlin > > of_mdio: Honour "status=disabled" property of device > > Currently of_mdiobus_register() function registers all PHY devices, > independetly from their status property in device tree. According to > "ePAPR 1.1" spec, device should only be registered if there is no > "status" property, or it has "ok" (or "okay") value (see > of_device_is_available()). In case of "platform devices", > of_platform_device_create_pdata() checks for "status" and ensures > that disabled devices are not pupulated. But such check for MDIO buses > was missing until now. Fix it. > > Signed-off-by: Alexander Sverdlin > --- Applied. Rob > --- linux.orig/drivers/of/of_mdio.c > +++ linux/drivers/of/of_mdio.c > @@ -53,7 +53,7 @@ int of_mdiobus_register(struct mii_bus * > return rc; > > /* Loop over the child nodes and register a phy_device for each one */ > - for_each_child_of_node(np, child) { > + for_each_available_child_of_node(np, child) { > const __be32 *paddr; > u32 addr; > int len; > _______________________________________________ > devicetree-discuss mailing list > devicetree-discuss@lists.ozlabs.org > https://lists.ozlabs.org/listinfo/devicetree-discuss >