From mboxrd@z Thu Jan 1 00:00:00 1970 From: Matthias Brugger Subject: Re: [PATCH 2/3] ARM/dts: omap3: Add support for IGEPv2 board Date: Fri, 30 Nov 2012 10:48:37 +0100 Message-ID: <50B880F5.9060607@gmail.com> References: <1354144466-750-1-git-send-email-javier.martinez@collabora.co.uk> <1354144466-750-3-git-send-email-javier.martinez@collabora.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; Format="flowed" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1354144466-750-3-git-send-email-javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: devicetree-discuss-bounces+gldd-devicetree-discuss=m.gmane.org-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org Sender: "devicetree-discuss" To: Javier Martinez Canillas Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Enric Balletbo i Serra , linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Enrico Butera , Matthias Brugger List-Id: devicetree@vger.kernel.org On 11/29/2012 12:14 AM, Javier Martinez Canillas wrote: > ISEE IGEPv2 is an TI OMAP3 SoC based embedded board. > > This patch adds an initial device tree support to boot > an IGEPv2 from the MMC/SD. > > Currently is working everything that is supported by DT > on OMAP3 SoCs (MMC/SD, GPIO LEDs, EEPROM, TWL4030 audio). > > Signed-off-by: Javier Martinez Canillas > --- Acked-by: Matthias Brugger > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/omap3-igep0020.dts | 56 ++++++++++++++++++++++++++++++++++ > 2 files changed, 57 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/boot/dts/omap3-igep0020.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index f37cf9f..1dc0f39 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -66,6 +66,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ > omap3-beagle-xm.dtb \ > omap3-evm.dtb \ > omap3-tobi.dtb \ > + omap3-igep0020.dtb \ > omap4-panda.dtb \ > omap4-pandaES.dtb \ > omap4-var_som.dtb \ > diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts > new file mode 100644 > index 0000000..9dd4d22 > --- /dev/null > +++ b/arch/arm/boot/dts/omap3-igep0020.dts > @@ -0,0 +1,56 @@ > +/* > + * Device Tree Source for IGEPv2 board > + * > + * Copyright (C) 2012 Javier Martinez Canillas > + * Copyright (C) 2012 Enric Balletbo i Serra > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +/include/ "omap3-igep.dtsi" > + > +/ { > + model = "IGEPv2"; > + compatible = "isee,omap3-igep0020", "ti,omap3"; > + > + leds { > + compatible = "gpio-leds"; > + boot { > + label = "omap3:green:boot"; > + gpios = <&gpio1 26 0>; > + linux,default-trigger = "default-on"; > + }; > + > + user0 { > + label = "omap3:red:user0"; > + gpios = <&gpio1 27 0>; > + default-state = "off"; > + }; > + > + user1 { > + label = "omap3:red:user1"; > + gpios = <&gpio1 28 0>; > + default-state = "off"; > + }; > + > + user2 { > + label = "omap3:green:user1"; > + gpios = <&twl_gpio 19 1>; > + }; > + }; > +}; > + > +&i2c3 { > + clock-frequency = <100000>; > + > + /* > + * Display monitor features are burnt in the EEPROM > + * as EDID data. > + */ > + eeprom@50 { > + compatible = "ti,eeprom"; > + reg = <0x50>; > + }; > +}; >