devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sekhar Nori <nsekhar-l0cyMroinI0@public.gmane.org>
To: Mrugesh Katepallewar <mrugesh.mk-l0cyMroinI0@public.gmane.org>
Cc: davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org,
	linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org,
	hs-ynQEQJNshbs@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH] ARM: davinci: da850: add RTC driver DT entries
Date: Fri, 25 Jan 2013 16:04:22 +0530	[thread overview]
Message-ID: <51025FAE.3060503@ti.com> (raw)
In-Reply-To: <1359094430-14724-1-git-send-email-mrugesh.mk-l0cyMroinI0@public.gmane.org>

On 1/25/2013 11:43 AM, Mrugesh Katepallewar wrote:
> Add RTC DT entries in da850 dts file.
> 
> Signed-off-by: Mrugesh Katepallewar <mrugesh.mk-l0cyMroinI0@public.gmane.org>
> ---
> Applies on top of v3.8-rc4 of linus tree.
> 
> Tested on da850-evm device.
> 
> Test Procedure:
> date [YYYY.]MM.DD-hh:mm[:ss]
> hwclock -w
> reset board and check system time.
> 
> :100644 100644 37dc5a3... b16efd4... M	arch/arm/boot/dts/da850-evm.dts
> :100644 100644 640ab75... a8eb1b1... M	arch/arm/boot/dts/da850.dtsi
>  arch/arm/boot/dts/da850-evm.dts |    3 +++
>  arch/arm/boot/dts/da850.dtsi    |    8 ++++++++
>  2 files changed, 11 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
> index 37dc5a3..b16efd4 100644
> --- a/arch/arm/boot/dts/da850-evm.dts
> +++ b/arch/arm/boot/dts/da850-evm.dts
> @@ -24,5 +24,8 @@
>  		serial2: serial@1d0d000 {
>  			status = "okay";
>  		};
> +		rtc@1c23000 {
> +			status = "okay";
> +		};
>  	};
>  };
> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
> index 640ab75..a8eb1b1 100644
> --- a/arch/arm/boot/dts/da850.dtsi
> +++ b/arch/arm/boot/dts/da850.dtsi
> @@ -56,5 +56,13 @@
>  			interrupt-parent = <&intc>;
>  			status = "disabled";
>  		};
> +		rtc@1c23000 {
> +			compatible = "ti,da830-rtc";
> +			reg = <0x23000 0x1000>;
> +			interrupts = <19
> +				      19>;

Why two interrupts of the same number? If there is only one interrupt
line then only one should be specified, no?

Thanks,
Sekhar

  parent reply	other threads:[~2013-01-25 10:34 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-25  6:13 [PATCH] ARM: davinci: da850: add RTC driver DT entries Mrugesh Katepallewar
     [not found] ` <1359094430-14724-1-git-send-email-mrugesh.mk-l0cyMroinI0@public.gmane.org>
2013-01-25 10:34   ` Sekhar Nori [this message]
2013-01-25 11:04     ` Katepallewar, Mrugesh
2013-01-25 11:22       ` Sekhar Nori
2013-01-28  7:00         ` Katepallewar, Mrugesh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=51025FAE.3060503@ti.com \
    --to=nsekhar-l0cymroini0@public.gmane.org \
    --cc=davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org \
    --cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
    --cc=hs-ynQEQJNshbs@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mrugesh.mk-l0cyMroinI0@public.gmane.org \
    --cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).