From: Jonathan Cameron <jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
Cc: linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
Naveen Krishna Chatradhi
<ch.naveen-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
Lars-Peter Clausen <lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org>,
Doug Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
Tomasz Figa <tomasz.figa-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Grant Likely
<grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>,
Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
Subject: Re: [PATCH 1/4] iio: max1363: Use devm_ functions whereever possible to allocate resources
Date: Sun, 03 Feb 2013 12:10:32 +0000 [thread overview]
Message-ID: <510E53B8.40803@kernel.org> (raw)
In-Reply-To: <1359853180-5664-2-git-send-email-linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
On 02/03/2013 12:59 AM, Guenter Roeck wrote:
> Signed-off-by: Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
Applied to togreg branch of iio.git.
Note I'll probably rebase the togreg branch if / when Greg has pulled
last pull request (sent a few mins ago) so as to get a directly
applied fix for this driver.
> ---
> drivers/iio/adc/max1363.c | 29 ++++++++++-------------------
> 1 file changed, 10 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c
> index ef868c9..1353fda 100644
> --- a/drivers/iio/adc/max1363.c
> +++ b/drivers/iio/adc/max1363.c
> @@ -1410,8 +1410,9 @@ static int max1363_alloc_scan_masks(struct iio_dev *indio_dev)
> unsigned long *masks;
> int i;
>
> - masks = kzalloc(BITS_TO_LONGS(MAX1363_MAX_CHANNELS)*sizeof(long)*
> - (st->chip_info->num_modes + 1), GFP_KERNEL);
> + masks = devm_kzalloc(&indio_dev->dev,
> + BITS_TO_LONGS(MAX1363_MAX_CHANNELS) * sizeof(long) *
> + (st->chip_info->num_modes + 1), GFP_KERNEL);
> if (!masks)
> return -ENOMEM;
>
> @@ -1546,7 +1547,7 @@ static int max1363_probe(struct i2c_client *client,
>
> st = iio_priv(indio_dev);
>
> - st->reg = regulator_get(&client->dev, "vcc");
> + st->reg = devm_regulator_get(&client->dev, "vcc");
> if (IS_ERR(st->reg)) {
> ret = PTR_ERR(st->reg);
> goto error_unregister_map;
> @@ -1554,7 +1555,7 @@ static int max1363_probe(struct i2c_client *client,
>
> ret = regulator_enable(st->reg);
> if (ret)
> - goto error_put_reg;
> + goto error_unregister_map;
>
> /* this is only used for device removal purposes */
> i2c_set_clientdata(client, indio_dev);
> @@ -1575,15 +1576,15 @@ static int max1363_probe(struct i2c_client *client,
> indio_dev->modes = INDIO_DIRECT_MODE;
> ret = max1363_initial_setup(st);
> if (ret < 0)
> - goto error_free_available_scan_masks;
> + goto error_disable_reg;
>
> ret = iio_triggered_buffer_setup(indio_dev, NULL,
> &max1363_trigger_handler, &max1363_buffered_setup_ops);
> if (ret)
> - goto error_free_available_scan_masks;
> + goto error_disable_reg;
>
> if (client->irq) {
> - ret = request_threaded_irq(st->client->irq,
> + ret = devm_request_threaded_irq(&client->dev, st->client->irq,
> NULL,
> &max1363_event_handler,
> IRQF_TRIGGER_RISING | IRQF_ONESHOT,
> @@ -1596,20 +1597,14 @@ static int max1363_probe(struct i2c_client *client,
>
> ret = iio_device_register(indio_dev);
> if (ret < 0)
> - goto error_free_irq;
> + goto error_uninit_buffer;
>
> return 0;
> -error_free_irq:
> - if (client->irq)
> - free_irq(st->client->irq, indio_dev);
> +
> error_uninit_buffer:
> iio_triggered_buffer_cleanup(indio_dev);
> -error_free_available_scan_masks:
> - kfree(indio_dev->available_scan_masks);
> error_disable_reg:
> regulator_disable(st->reg);
> -error_put_reg:
> - regulator_put(st->reg);
> error_unregister_map:
> iio_map_array_unregister(indio_dev);
> error_free_device:
> @@ -1624,12 +1619,8 @@ static int max1363_remove(struct i2c_client *client)
> struct max1363_state *st = iio_priv(indio_dev);
>
> iio_device_unregister(indio_dev);
> - if (client->irq)
> - free_irq(st->client->irq, indio_dev);
> iio_triggered_buffer_cleanup(indio_dev);
> - kfree(indio_dev->available_scan_masks);
> regulator_disable(st->reg);
> - regulator_put(st->reg);
> iio_map_array_unregister(indio_dev);
> iio_device_free(indio_dev);
>
>
next prev parent reply other threads:[~2013-02-03 12:10 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-03 0:59 [RFC v2 0/4] iio: Devicetree support Guenter Roeck
[not found] ` <1359853180-5664-1-git-send-email-linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-02-03 0:59 ` [PATCH 1/4] iio: max1363: Use devm_ functions whereever possible to allocate resources Guenter Roeck
[not found] ` <1359853180-5664-2-git-send-email-linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-02-03 12:10 ` Jonathan Cameron [this message]
[not found] ` <510E53B8.40803-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2013-02-03 17:18 ` Guenter Roeck
[not found] ` <20130203171852.GA29574-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-02-03 18:02 ` Jonathan Cameron
[not found] ` <510EA651.6040509-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2013-02-03 18:16 ` Guenter Roeck
2013-02-03 0:59 ` [PATCH v2 2/4] iio/adc: (max1363) Add support for external reference voltage Guenter Roeck
[not found] ` <1359853180-5664-3-git-send-email-linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-02-03 12:12 ` Jonathan Cameron
2013-02-03 0:59 ` [PATCH RFC 3/4] iio: Update iio_channel_get API to use consumer device pointer as argument Guenter Roeck
2013-02-03 0:59 ` [PATCH v2 4/4] iio: Add OF support Guenter Roeck
[not found] ` <1359853180-5664-5-git-send-email-linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-02-03 1:30 ` Tomasz Figa
2013-02-03 2:06 ` Guenter Roeck
[not found] ` <20130203020651.GA7655-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-02-03 11:29 ` Lars-Peter Clausen
[not found] ` <510E4A13.3080800-Qo5EllUWu/uELgA04lAiVw@public.gmane.org>
2013-02-03 11:52 ` Tomasz Figa
2013-02-03 12:22 ` Lars-Peter Clausen
2013-02-03 17:01 ` Guenter Roeck
[not found] ` <20130203170107.GD21576-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-02-03 17:30 ` Tomasz Figa
2013-02-03 18:55 ` Lars-Peter Clausen
[not found] ` <510EB2B3.7090503-Qo5EllUWu/uELgA04lAiVw@public.gmane.org>
2013-02-03 20:58 ` Jonathan Cameron
[not found] ` <510ECF91.8020800-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2013-02-03 22:44 ` Lars-Peter Clausen
2013-02-03 23:14 ` Tomasz Figa
2013-02-04 17:12 ` Guenter Roeck
[not found] ` <20130204171214.GA23170-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-02-04 17:41 ` Lars-Peter Clausen
2013-02-04 17:51 ` Guenter Roeck
[not found] ` <20130204175134.GA17776-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-02-04 18:00 ` Tomasz Figa
2013-02-04 18:09 ` Guenter Roeck
2013-02-03 16:31 ` Guenter Roeck
[not found] ` <20130203163124.GC21576-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-02-03 19:00 ` Lars-Peter Clausen
2013-02-03 14:17 ` Lars-Peter Clausen
[not found] ` <510E7195.4070803-Qo5EllUWu/uELgA04lAiVw@public.gmane.org>
2013-02-03 16:22 ` Guenter Roeck
[not found] ` <20130203162213.GA21576-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-02-04 16:37 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=510E53B8.40803@kernel.org \
--to=jic23-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
--cc=ch.naveen-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org \
--cc=lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org \
--cc=linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org \
--cc=linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
--cc=tomasz.figa-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).