From: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
To: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: <krzysztof.kozlowski+dt@linaro.org>, <robh+dt@kernel.org>,
<gregkh@linuxfoundation.org>, <christophe.jaillet@wanadoo.fr>,
<devicetree@vger.kernel.org>, <linux-usb@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<amelie.delaunay@foss.st.com>, <alexandre.torgue@foss.st.com>
Subject: Re: [PATCH v2 4/4] usb: typec: ucsi: stm32g0: add support for power management
Date: Tue, 12 Jul 2022 12:01:35 +0200 [thread overview]
Message-ID: <51369b07-dade-7b56-bc9c-bc21b161916e@foss.st.com> (raw)
In-Reply-To: <Ys03QgD0aIF1Zl9R@kuha.fi.intel.com>
On 7/12/22 10:56, Heikki Krogerus wrote:
> Hi,
>
> Mon, Jul 11, 2022 at 02:01:22PM +0200, Fabrice Gasnier kirjoitti:
>> Type-C connector can be used as a wakeup source (typically to detect
>> changes on the port, attach or detach...).
>> Add suspend / resume routines to enable wake irqs, and signal a wakeup
>> event in case the IRQ has fired while in suspend.
>> The i2c core is doing the necessary initialization when the "wakeup-source"
>> flag is provided.
>> Note: the interrupt handler shouldn't be called before the i2c bus resumes.
>> So, the interrupts are disabled during suspend period, and re-enabled
>> upon resume, to avoid i2c transfer while suspended, from the irq handler.
>>
>> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
>
> Does this really need a separate patch? Does the support depend on the
> second patch somehow?
Hi Heikki,
There's no dependency. I did a separate patch mainly to ease the review.
>
> If not, then just merge this into the first patch. That
> g0->in_bootloader check you can add in the second patch.
Ok, I'll merge this into the first patches as you suggest, and add your
Acked-by.
Thanks for reviewing,
Best Regards,
Fabrice
>
> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
>
>> ---
>> drivers/usb/typec/ucsi/ucsi_stm32g0.c | 52 +++++++++++++++++++++++++++
>> 1 file changed, 52 insertions(+)
>>
>> diff --git a/drivers/usb/typec/ucsi/ucsi_stm32g0.c b/drivers/usb/typec/ucsi/ucsi_stm32g0.c
>> index b1d891c9a92c0..061551d464f12 100644
>> --- a/drivers/usb/typec/ucsi/ucsi_stm32g0.c
>> +++ b/drivers/usb/typec/ucsi/ucsi_stm32g0.c
>> @@ -66,6 +66,8 @@ struct ucsi_stm32g0 {
>> unsigned long flags;
>> const char *fw_name;
>> struct ucsi *ucsi;
>> + bool suspended;
>> + bool wakeup_event;
>> };
>>
>> /*
>> @@ -416,6 +418,9 @@ static irqreturn_t ucsi_stm32g0_irq_handler(int irq, void *data)
>> u32 cci;
>> int ret;
>>
>> + if (g0->suspended)
>> + g0->wakeup_event = true;
>> +
>> ret = ucsi_stm32g0_read(g0->ucsi, UCSI_CCI, &cci, sizeof(cci));
>> if (ret)
>> return IRQ_NONE;
>> @@ -696,6 +701,52 @@ static int ucsi_stm32g0_remove(struct i2c_client *client)
>> return 0;
>> }
>>
>> +static int ucsi_stm32g0_suspend(struct device *dev)
>> +{
>> + struct ucsi_stm32g0 *g0 = dev_get_drvdata(dev);
>> + struct i2c_client *client = g0->client;
>> +
>> + if (g0->in_bootloader)
>> + return 0;
>> +
>> + /* Keep the interrupt disabled until the i2c bus has been resumed */
>> + disable_irq(client->irq);
>> +
>> + g0->suspended = true;
>> + g0->wakeup_event = false;
>> +
>> + if (device_may_wakeup(dev) || device_wakeup_path(dev))
>> + enable_irq_wake(client->irq);
>> +
>> + return 0;
>> +}
>> +
>> +static int ucsi_stm32g0_resume(struct device *dev)
>> +{
>> + struct ucsi_stm32g0 *g0 = dev_get_drvdata(dev);
>> + struct i2c_client *client = g0->client;
>> +
>> + if (g0->in_bootloader)
>> + return 0;
>> +
>> + if (device_may_wakeup(dev) || device_wakeup_path(dev))
>> + disable_irq_wake(client->irq);
>> +
>> + enable_irq(client->irq);
>> +
>> + /* Enforce any pending handler gets called to signal a wakeup_event */
>> + synchronize_irq(client->irq);
>> +
>> + if (g0->wakeup_event)
>> + pm_wakeup_event(g0->dev, 0);
>> +
>> + g0->suspended = false;
>> +
>> + return 0;
>> +}
>> +
>> +static DEFINE_SIMPLE_DEV_PM_OPS(ucsi_stm32g0_pm_ops, ucsi_stm32g0_suspend, ucsi_stm32g0_resume);
>> +
>> static const struct of_device_id __maybe_unused ucsi_stm32g0_typec_of_match[] = {
>> { .compatible = "st,stm32g0-typec" },
>> {},
>> @@ -712,6 +763,7 @@ static struct i2c_driver ucsi_stm32g0_i2c_driver = {
>> .driver = {
>> .name = "ucsi-stm32g0-i2c",
>> .of_match_table = of_match_ptr(ucsi_stm32g0_typec_of_match),
>> + .pm = pm_sleep_ptr(&ucsi_stm32g0_pm_ops),
>> },
>> .probe = ucsi_stm32g0_probe,
>> .remove = ucsi_stm32g0_remove,
>> --
>> 2.25.1
>
prev parent reply other threads:[~2022-07-12 10:03 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-11 12:01 [PATCH v2 0/4] usb: typec: ucsi: add support for stm32g0 Fabrice Gasnier
2022-07-11 12:01 ` [PATCH v2 1/4] dt-bindings: usb: typec: add bindings for stm32g0 controller Fabrice Gasnier
2022-07-12 8:42 ` Krzysztof Kozlowski
2022-07-12 10:18 ` Fabrice Gasnier
2022-07-11 12:01 ` [PATCH v2 2/4] usb: typec: ucsi: stm32g0: add support for stm32g0 i2c controller Fabrice Gasnier
2022-07-12 8:35 ` Heikki Krogerus
2022-07-11 12:01 ` [PATCH v2 3/4] usb: typec: ucsi: stm32g0: add bootloader support Fabrice Gasnier
2022-07-12 8:38 ` Heikki Krogerus
2022-07-11 12:01 ` [PATCH v2 4/4] usb: typec: ucsi: stm32g0: add support for power management Fabrice Gasnier
2022-07-12 8:56 ` Heikki Krogerus
2022-07-12 10:01 ` Fabrice Gasnier [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51369b07-dade-7b56-bc9c-bc21b161916e@foss.st.com \
--to=fabrice.gasnier@foss.st.com \
--cc=alexandre.torgue@foss.st.com \
--cc=amelie.delaunay@foss.st.com \
--cc=christophe.jaillet@wanadoo.fr \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux-usb@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).