Re: [RFC 05/12] ARM: EXYNOS: Add devicetree node for mipi-csis driver for exynos5

[Sylwester Nawrocki <sylvester.nawrocki@gmail.com>]

On 03/06/2013 12:53 PM, Shaik Ameer Basha wrote:
> --- a/arch/arm/boot/dts/exynos5250.dtsi
> +++ b/arch/arm/boot/dts/exynos5250.dtsi
> @@ -47,6 +47,8 @@
>   		i2c6 =&i2c_6;
>   		i2c7 =&i2c_7;
>   		i2c8 =&i2c_8;
> +		csis0 =&csis_0;
> +		csis1 =&csis_1;

You can drop these aliases if you use my latest patches as indicated
in the comment to patch 00/12.

> diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c
> index e9d7b80..34a22ff 100644
> --- a/arch/arm/mach-exynos/clock-exynos5.c
> +++ b/arch/arm/mach-exynos/clock-exynos5.c
> @@ -859,6 +859,16 @@ static struct clk exynos5_init_clocks_off[] = {
>   		.enable		= exynos5_clk_ip_gscl_ctrl,
>   		.ctrlbit	= (1<<  3),
>   	}, {
> +		.name		= "csis",
> +		.devname	= "s5p-mipi-csis.0",
> +		.enable		= exynos5_clk_ip_gscl_ctrl,
> +		.ctrlbit	= (1<<  5),
> +	}, {

Instead you should add relevant clock definitions to the Samsung clocks 
driver,
it's already merged in Kukjin's tree.