devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Florian Vaussard <florian.vaussard@epfl.ch>
To: Benoit Cousson <b-cousson@ti.com>
Cc: Jon Hunter <jon-hunter@ti.com>, Tony Lindgren <tony@atomide.com>,
	device-tree <devicetree-discuss@lists.ozlabs.org>,
	linux-omap <linux-omap@vger.kernel.org>,
	linux-arm <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH 0/9] ARM: dts: Various OMAP2+ device-tree updates
Date: Thu, 14 Mar 2013 16:45:44 +0100	[thread overview]
Message-ID: <5141F0A8.6040009@epfl.ch> (raw)
In-Reply-To: <5141E55E.9040801@ti.com>

Hi Benoit,

On 03/14/2013 03:57 PM, Benoit Cousson wrote:
> Salut Jon,
>
> On 03/08/2013 06:27 PM, Jon Hunter wrote:
>> Various OMAP device-tree updates for PMU, DMA, GPIO, GPMC and boards.
>>
>> The DMA, PMU and OMAP3430 SDP board changes have been sent before
>> individually but re-sending here as a complete series for v3.10.
>>
>> This is based upon v3.9-rc1 and the OMAP3 GPMC binding from Florian
>> Vaussard [1] and OMAP5 DT SPI patch from Felipe Balbi [2].
>>
>> [1] https://patchwork.kernel.org/patch/2057111/
>
> I've tried to follow the series review, and it seems that Florian was
> considering sending some other patches. It is not clear if this is a new
> version of the series or some additional patches.
>

Concerning patch [1], it can be merged to add the GPMC binding for OMAP3.
But please discard the rest of my original series, I will repost something
later.

Regards,

Florian

> I still did not merge this series wondering what to do with it.
>
> Felipe's patch on this other hand is already applied in my branch.
>
> Regards,
> Benoit
>
>> [2] https://patchwork.kernel.org/patch/2134711/
>>
>> Jon Hunter (9):
>>    ARM: OMAP2+: Prepare for device-tree PMU support
>>    ARM: dts: OMAP2+: Add PMU nodes
>>    ARM: dts: OMAP2+: Add SDMA controller bindings and nodes
>>    ARM: dts: OMAP3: Add support for OMAP3430 SDP board
>>    ARM: dts: Add GPMC node for OMAP2, OMAP4 and OMAP5
>>    ARM: dts: Add OMAP3430 SDP flash memory bindings
>>    ARM: dts: Add OMAP2 gpio bindings
>>    ARM: dts: OMAP3+: Correct gpio #interrupts-cells property
>>    ARM: dts: OMAP3: Add reg and interrupt properties for gpio
>>
>>   .../devicetree/bindings/dma/omap-sdma.txt          |   51 +++++++
>>   arch/arm/boot/dts/Makefile                         |    1 +
>>   arch/arm/boot/dts/omap2.dtsi                       |   17 +++
>>   arch/arm/boot/dts/omap2420.dtsi                    |   55 ++++++++
>>   arch/arm/boot/dts/omap2430.dtsi                    |   66 +++++++++
>>   arch/arm/boot/dts/omap3.dtsi                       |   70 +++++++++-
>>   arch/arm/boot/dts/omap3430-sdp.dts                 |  141 ++++++++++++++++++++
>>   arch/arm/boot/dts/omap4-panda-es.dts               |    2 +
>>   arch/arm/boot/dts/omap4.dtsi                       |   64 ++++++++-
>>   arch/arm/boot/dts/omap4460.dtsi                    |   18 +++
>>   arch/arm/boot/dts/omap5.dtsi                       |   68 ++++++++--
>>   arch/arm/mach-omap2/pmu.c                          |   14 +-
>>   12 files changed, 544 insertions(+), 23 deletions(-)
>>   create mode 100644 Documentation/devicetree/bindings/dma/omap-sdma.txt
>>   create mode 100644 arch/arm/boot/dts/omap3430-sdp.dts
>>   create mode 100644 arch/arm/boot/dts/omap4460.dtsi
>>


  reply	other threads:[~2013-03-14 15:45 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-03-08 17:27 [PATCH 0/9] ARM: dts: Various OMAP2+ device-tree updates Jon Hunter
2013-03-08 17:27 ` [PATCH 1/9] ARM: OMAP2+: Prepare for device-tree PMU support Jon Hunter
2013-03-08 17:27 ` [PATCH 2/9] ARM: dts: OMAP2+: Add PMU nodes Jon Hunter
2013-03-08 17:27 ` [PATCH 3/9] ARM: dts: OMAP2+: Add SDMA controller bindings and nodes Jon Hunter
2013-03-08 17:27 ` [PATCH 4/9] ARM: dts: OMAP3: Add support for OMAP3430 SDP board Jon Hunter
2013-03-09  2:25   ` Anil Kumar
2013-03-11 17:53     ` Jon Hunter
2013-03-12  2:42       ` Kumar, Anil
2013-03-12  8:50         ` Javier Martinez Canillas
2013-03-13  2:50           ` Kumar, Anil
2013-03-12 21:27         ` Jon Hunter
2013-03-13  2:59           ` Kumar, Anil
2013-03-11  2:45   ` Anil Kumar
2013-03-11 17:54     ` Jon Hunter
2013-03-08 17:27 ` [PATCH 5/9] ARM: dts: Add GPMC node for OMAP2, OMAP4 and OMAP5 Jon Hunter
2013-03-08 20:25   ` Javier Martinez Canillas
2013-03-08 21:41     ` Jon Hunter
2013-03-09  1:25       ` Javier Martinez Canillas
2013-03-09 12:42         ` Ezequiel Garcia
2013-03-11 17:56           ` Jon Hunter
2013-03-14 15:45             ` Benoit Cousson
2013-03-14 15:50               ` Jon Hunter
2013-03-14 15:57                 ` Ezequiel Garcia
2013-03-14 15:58                 ` Benoit Cousson
2013-03-14 16:00                   ` Jon Hunter
2013-03-14 16:03                     ` Benoit Cousson
2013-03-08 17:27 ` [PATCH 6/9] ARM: dts: Add OMAP3430 SDP flash memory bindings Jon Hunter
2013-03-08 17:27 ` [PATCH 7/9] ARM: dts: Add OMAP2 gpio bindings Jon Hunter
2013-03-08 17:27 ` [PATCH 8/9] ARM: dts: OMAP3+: Correct gpio #interrupts-cells property Jon Hunter
2013-03-08 17:27 ` [PATCH 9/9] ARM: dts: OMAP3: Add reg and interrupt properties for gpio Jon Hunter
2013-03-14 14:57 ` [PATCH 0/9] ARM: dts: Various OMAP2+ device-tree updates Benoit Cousson
2013-03-14 15:45   ` Florian Vaussard [this message]
2013-03-14 15:59     ` Jon Hunter
2013-03-14 16:06       ` Benoit Cousson
2013-03-14 16:02   ` Javier Martinez Canillas
2013-03-14 16:04     ` Jon Hunter
2013-03-14 16:08     ` Benoit Cousson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5141F0A8.6040009@epfl.ch \
    --to=florian.vaussard@epfl.ch \
    --cc=b-cousson@ti.com \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=jon-hunter@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).