[PATCH V2 0/8] ARM: dts: Various OMAP2+ device-tree updates

[PATCH V2 0/8] ARM: dts: Various OMAP2+ device-tree updates

[Jon Hunter]

Various OMAP device-tree updates for PMU, DMA, GPIO, GPMC and boards.

The DMA, PMU and OMAP3430 SDP board changes have been sent before
individually but re-sending here as a complete series for v3.10.

This is based upon Benoit's for_3.10/dts branch [1]. Branch available
here [2].

V2 changes:
- Rebased on Benoit's for_3.10/dts branch
- Squashed patches adding support for OMAP3430 SDP board and patch
  to add flash support for OMAP3430 SDP board.

[1] http://git.kernel.org/cgit/linux/kernel/git/bcousson/linux-omap-dt.git/log/?h=for_3.10/dts
[2] git://github.com/jonhunter/linux.git omap-dt-for-v3.10

Jon Hunter (8):
  ARM: OMAP2+: Prepare for device-tree PMU support
  ARM: dts: OMAP2+: Add PMU nodes
  ARM: dts: OMAP2+: Add SDMA controller bindings and nodes
  ARM: dts: Add GPMC node for OMAP2, OMAP4 and OMAP5
  ARM: dts: Add OMAP2 gpio bindings
  ARM: dts: OMAP3+: Correct gpio #interrupts-cells property
  ARM: dts: OMAP3: Add reg and interrupt properties for gpio
  ARM: dts: OMAP3: Add support for OMAP3430 SDP board

 arch/arm/boot/dts/Makefile           |    1 +
 arch/arm/boot/dts/omap2.dtsi         |   17 ++++
 arch/arm/boot/dts/omap2420.dtsi      |   55 +++++++++++++
 arch/arm/boot/dts/omap2430.dtsi      |   66 ++++++++++++++++
 arch/arm/boot/dts/omap3.dtsi         |   70 +++++++++++++++--
 arch/arm/boot/dts/omap3430-sdp.dts   |  141 ++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/omap4-panda-es.dts |    2 +
 arch/arm/boot/dts/omap4.dtsi         |   64 +++++++++++++--
 arch/arm/boot/dts/omap4460.dtsi      |   18 +++++
 arch/arm/boot/dts/omap5.dtsi         |   68 ++++++++++++++--
 arch/arm/mach-omap2/pmu.c            |   14 +++-
 11 files changed, 493 insertions(+), 23 deletions(-)
 create mode 100644 arch/arm/boot/dts/omap3430-sdp.dts
 create mode 100644 arch/arm/boot/dts/omap4460.dtsi

-- 
1.7.10.4

[PATCH V2 1/8] ARM: OMAP2+: Prepare for device-tree PMU support

[Jon Hunter]

If device-tree is present, then do not create the PMU device from within
the OMAP specific PMU code. This is required to allow device-tree to
create the PMU device from the PMU device-tree node.

PMU is not currently supported for OMAP4430 (due to a dependency on
having a cross-trigger interface driver) and so ensure that this
indicated on boot with or without device-tree.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/pmu.c |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c
index 9debf82..9ace8ea 100644
--- a/arch/arm/mach-omap2/pmu.c
+++ b/arch/arm/mach-omap2/pmu.c
@@ -11,6 +11,8 @@
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  */
+#include <linux/of.h>
+
 #include <asm/pmu.h>
 
 #include "soc.h"
@@ -63,6 +65,15 @@ static int __init omap_init_pmu(void)
 	unsigned oh_num;
 	char **oh_names;
 
+	/* XXX Remove this check when the CTI driver is available */
+	if (cpu_is_omap443x()) {
+		pr_info("ARM PMU: not yet supported on OMAP4430 due to missing CTI driver\n");
+		return 0;
+	}
+
+	if (of_have_populated_dt())
+		return 0;
+
 	/*
 	 * To create an ARM-PMU device the following HWMODs
 	 * are required for the various OMAP2+ devices.
@@ -75,9 +86,6 @@ static int __init omap_init_pmu(void)
 	if (cpu_is_omap443x()) {
 		oh_num = ARRAY_SIZE(omap4430_pmu_oh_names);
 		oh_names = omap4430_pmu_oh_names;
-		/* XXX Remove the next two lines when CTI driver available */
-		pr_info("ARM PMU: not yet supported on OMAP4430 due to missing CTI driver\n");
-		return 0;
 	} else if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		oh_num = ARRAY_SIZE(omap3_pmu_oh_names);
 		oh_names = omap3_pmu_oh_names;
-- 
1.7.10.4

[PATCH V2 2/8] ARM: dts: OMAP2+: Add PMU nodes

[Jon Hunter]

Add PMU nodes for OMAP2, OMAP3 and OMAP4460 devices.

Please note that the node for OMAP4460 has been placed in a separate
header file for OMAP4460, because the node is not compatible with
OMAP4430. The node for OMAP4430 is not included because PMU is not
currently supported on OMAP4430 due to the absence of a cross-trigger
interface driver.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
 arch/arm/boot/dts/omap2.dtsi         |    5 +++++
 arch/arm/boot/dts/omap3.dtsi         |    6 ++++++
 arch/arm/boot/dts/omap4-panda-es.dts |    2 ++
 arch/arm/boot/dts/omap4460.dtsi      |   18 ++++++++++++++++++
 4 files changed, 31 insertions(+)
 create mode 100644 arch/arm/boot/dts/omap4460.dtsi

diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index 761c4b6..27f5ea1 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -26,6 +26,11 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,arm1136-pmu";
+		interrupts = <3>;
+	};
+
 	soc {
 		compatible = "ti,omap-infra";
 		mpu {
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index d9970de..0ec7d5c 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -26,6 +26,12 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a8-pmu";
+		interrupts = <3>;
+		ti,hwmods = "debugss";
+	};
+
 	/*
 	 * The soc node represents the soc top level view. It is uses for IPs
 	 * that are not memory mapped in the MPU view or for the MPU itself.
diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
index 73bc1a6..2a6e344 100644
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -5,7 +5,9 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+
 /include/ "omap4-panda.dts"
+/include/ "omap4460.dtsi"
 
 /* Audio routing is differnet between PandaBoard4430 and PandaBoardES */
 &sound {
diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
new file mode 100644
index 0000000..0a1d38b
--- /dev/null
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -0,0 +1,18 @@
+/*
+ * Device Tree Source for OMAP4460 SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/ {
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 54 0x4>,
+			     <0 55 0x4>;
+		ti,hwmods = "debugss";
+	};
+};
-- 
1.7.10.4

[PATCH V2 3/8] ARM: dts: OMAP2+: Add SDMA controller bindings and nodes

[Jon Hunter]

Add SDMA controller binding for OMAP2+ devices and populate DMA client
information for SPI and MMC peripheral on OMAP3+ devices. Please note
that OMAP24xx devices do not have SPI and MMC bindings available yet and
so DMA client information is not populated.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
---
 arch/arm/boot/dts/omap2.dtsi |   12 ++++++++++++
 arch/arm/boot/dts/omap3.dtsi |   40 ++++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/omap4.dtsi |   41 +++++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/omap5.dtsi |   41 +++++++++++++++++++++++++++++++++++++++++
 4 files changed, 134 insertions(+)

diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index 27f5ea1..84183f0 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -54,6 +54,18 @@
 			reg = <0x480FE000 0x1000>;
 		};
 
+		sdma: dma-controller@48056000 {
+			compatible = "ti,omap2430-sdma", "ti,omap2420-sdma";
+			reg = <0x48056000 0x1000>;
+			interrupts = <12>,
+				     <13>,
+				     <14>,
+				     <15>;
+			#dma-cells = <1>;
+			#dma-channels = <32>;
+			#dma-requests = <64>;
+		};
+
 		uart1: serial@4806a000 {
 			compatible = "ti,omap2-uart";
 			ti,hwmods = "uart1";
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 0ec7d5c..1dc72ea 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -81,6 +81,18 @@
 			reg = <0x48200000 0x1000>;
 		};
 
+		sdma: dma-controller@48056000 {
+			compatible = "ti,omap3630-sdma", "ti,omap3430-sdma";
+			reg = <0x48056000 0x1000>;
+			interrupts = <12>,
+				     <13>,
+				     <14>,
+				     <15>;
+			#dma-cells = <1>;
+			#dma-channels = <32>;
+			#dma-requests = <96>;
+		};
+
 		omap3_pmx_core: pinmux@48002030 {
 			compatible = "ti,omap3-padconf", "pinctrl-single";
 			reg = <0x48002030 0x05cc>;
@@ -198,6 +210,16 @@
 			#size-cells = <0>;
 			ti,hwmods = "mcspi1";
 			ti,spi-num-cs = <4>;
+			dmas = <&sdma 35>,
+			       <&sdma 36>,
+			       <&sdma 37>,
+			       <&sdma 38>,
+			       <&sdma 39>,
+			       <&sdma 40>,
+			       <&sdma 41>,
+			       <&sdma 42>;
+			dma-names = "tx0", "rx0", "tx1", "rx1",
+				    "tx2", "rx2", "tx3", "rx3";
 		};
 
 		mcspi2: spi@4809a000 {
@@ -206,6 +228,11 @@
 			#size-cells = <0>;
 			ti,hwmods = "mcspi2";
 			ti,spi-num-cs = <2>;
+			dmas = <&sdma 43>,
+			       <&sdma 44>,
+			       <&sdma 45>,
+			       <&sdma 46>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
 		};
 
 		mcspi3: spi@480b8000 {
@@ -214,6 +241,11 @@
 			#size-cells = <0>;
 			ti,hwmods = "mcspi3";
 			ti,spi-num-cs = <2>;
+			dmas = <&sdma 15>,
+			       <&sdma 16>,
+			       <&sdma 23>,
+			       <&sdma 24>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
 		};
 
 		mcspi4: spi@480ba000 {
@@ -222,22 +254,30 @@
 			#size-cells = <0>;
 			ti,hwmods = "mcspi4";
 			ti,spi-num-cs = <1>;
+			dmas = <&sdma 70>, <&sdma 71>;
+			dma-names = "tx0", "rx0";
 		};
 
 		mmc1: mmc@4809c000 {
 			compatible = "ti,omap3-hsmmc";
 			ti,hwmods = "mmc1";
 			ti,dual-volt;
+			dmas = <&sdma 61>, <&sdma 62>;
+			dma-names = "tx", "rx";
 		};
 
 		mmc2: mmc@480b4000 {
 			compatible = "ti,omap3-hsmmc";
 			ti,hwmods = "mmc2";
+			dmas = <&sdma 47>, <&sdma 48>;
+			dma-names = "tx", "rx";
 		};
 
 		mmc3: mmc@480ad000 {
 			compatible = "ti,omap3-hsmmc";
 			ti,hwmods = "mmc3";
+			dmas = <&sdma 77>, <&sdma 78>;
+			dma-names = "tx", "rx";
 		};
 
 		wdt2: wdt@48314000 {
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 06d044e..6669311 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -118,6 +118,18 @@
 			pinctrl-single,function-mask = <0x7fff>;
 		};
 
+		sdma: dma-controller@4a056000 {
+			compatible = "ti,omap4430-sdma";
+			reg = <0x4a056000 0x1000>;
+			interrupts = <0 12 0x4>,
+				     <0 13 0x4>,
+				     <0 14 0x4>,
+				     <0 15 0x4>;
+			#dma-cells = <1>;
+			#dma-channels = <32>;
+			#dma-requests = <127>;
+		};
+
 		gpio1: gpio@4a310000 {
 			compatible = "ti,omap4-gpio";
 			reg = <0x4a310000 0x200>;
@@ -260,6 +272,16 @@
 			#size-cells = <0>;
 			ti,hwmods = "mcspi1";
 			ti,spi-num-cs = <4>;
+			dmas = <&sdma 35>,
+			       <&sdma 36>,
+			       <&sdma 37>,
+			       <&sdma 38>,
+			       <&sdma 39>,
+			       <&sdma 40>,
+			       <&sdma 41>,
+			       <&sdma 42>;
+			dma-names = "tx0", "rx0", "tx1", "rx1",
+				    "tx2", "rx2", "tx3", "rx3";
 		};
 
 		mcspi2: spi@4809a000 {
@@ -270,6 +292,11 @@
 			#size-cells = <0>;
 			ti,hwmods = "mcspi2";
 			ti,spi-num-cs = <2>;
+			dmas = <&sdma 43>,
+			       <&sdma 44>,
+			       <&sdma 45>,
+			       <&sdma 46>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
 		};
 
 		mcspi3: spi@480b8000 {
@@ -280,6 +307,8 @@
 			#size-cells = <0>;
 			ti,hwmods = "mcspi3";
 			ti,spi-num-cs = <2>;
+			dmas = <&sdma 15>, <&sdma 16>;
+			dma-names = "tx0", "rx0";
 		};
 
 		mcspi4: spi@480ba000 {
@@ -290,6 +319,8 @@
 			#size-cells = <0>;
 			ti,hwmods = "mcspi4";
 			ti,spi-num-cs = <1>;
+			dmas = <&sdma 70>, <&sdma 71>;
+			dma-names = "tx0", "rx0";
 		};
 
 		mmc1: mmc@4809c000 {
@@ -299,6 +330,8 @@
 			ti,hwmods = "mmc1";
 			ti,dual-volt;
 			ti,needs-special-reset;
+			dmas = <&sdma 61>, <&sdma 62>;
+			dma-names = "tx", "rx";
 		};
 
 		mmc2: mmc@480b4000 {
@@ -307,6 +340,8 @@
 			interrupts = <0 86 0x4>;
 			ti,hwmods = "mmc2";
 			ti,needs-special-reset;
+			dmas = <&sdma 47>, <&sdma 48>;
+			dma-names = "tx", "rx";
 		};
 
 		mmc3: mmc@480ad000 {
@@ -315,6 +350,8 @@
 			interrupts = <0 94 0x4>;
 			ti,hwmods = "mmc3";
 			ti,needs-special-reset;
+			dmas = <&sdma 77>, <&sdma 78>;
+			dma-names = "tx", "rx";
 		};
 
 		mmc4: mmc@480d1000 {
@@ -323,6 +360,8 @@
 			interrupts = <0 96 0x4>;
 			ti,hwmods = "mmc4";
 			ti,needs-special-reset;
+			dmas = <&sdma 57>, <&sdma 58>;
+			dma-names = "tx", "rx";
 		};
 
 		mmc5: mmc@480d5000 {
@@ -331,6 +370,8 @@
 			interrupts = <0 59 0x4>;
 			ti,hwmods = "mmc5";
 			ti,needs-special-reset;
+			dmas = <&sdma 59>, <&sdma 60>;
+			dma-names = "tx", "rx";
 		};
 
 		wdt2: wdt@4a314000 {
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 130fbf2..f840499 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -108,6 +108,18 @@
 			      <0x48212000 0x1000>;
 		};
 
+		sdma: dma-controller@4a056000 {
+			compatible = "ti,omap4430-sdma";
+			reg = <0x4a056000 0x1000>;
+			interrupts = <0 12 0x4>,
+				     <0 13 0x4>,
+				     <0 14 0x4>,
+				     <0 15 0x4>;
+			#dma-cells = <1>;
+			#dma-channels = <32>;
+			#dma-requests = <127>;
+		};
+
 		gpio1: gpio@4ae10000 {
 			compatible = "ti,omap4-gpio";
 			reg = <0x4ae10000 0x200>;
@@ -249,6 +261,16 @@
 			#size-cells = <0>;
 			ti,hwmods = "mcspi1";
 			ti,spi-num-cs = <4>;
+			dmas = <&sdma 35>,
+			       <&sdma 36>,
+			       <&sdma 37>,
+			       <&sdma 38>,
+			       <&sdma 39>,
+			       <&sdma 40>,
+			       <&sdma 41>,
+			       <&sdma 42>;
+			dma-names = "tx0", "rx0", "tx1", "rx1",
+				    "tx2", "rx2", "tx3", "rx3";
 		};
 
 		mcspi2: spi@4809a000 {
@@ -259,6 +281,11 @@
 			#size-cells = <0>;
 			ti,hwmods = "mcspi2";
 			ti,spi-num-cs = <2>;
+			dmas = <&sdma 43>,
+			       <&sdma 44>,
+			       <&sdma 45>,
+			       <&sdma 46>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
 		};
 
 		mcspi3: spi@480b8000 {
@@ -269,6 +296,8 @@
 			#size-cells = <0>;
 			ti,hwmods = "mcspi3";
 			ti,spi-num-cs = <2>;
+			dmas = <&sdma 15>, <&sdma 16>;
+			dma-names = "tx0", "rx0";
 		};
 
 		mcspi4: spi@480ba000 {
@@ -279,6 +308,8 @@
 			#size-cells = <0>;
 			ti,hwmods = "mcspi4";
 			ti,spi-num-cs = <1>;
+			dmas = <&sdma 70>, <&sdma 71>;
+			dma-names = "tx0", "rx0";
 		};
 
 		uart1: serial@4806a000 {
@@ -336,6 +367,8 @@
 			ti,hwmods = "mmc1";
 			ti,dual-volt;
 			ti,needs-special-reset;
+			dmas = <&sdma 61>, <&sdma 62>;
+			dma-names = "tx", "rx";
 		};
 
 		mmc2: mmc@480b4000 {
@@ -344,6 +377,8 @@
 			interrupts = <0 86 0x4>;
 			ti,hwmods = "mmc2";
 			ti,needs-special-reset;
+			dmas = <&sdma 47>, <&sdma 48>;
+			dma-names = "tx", "rx";
 		};
 
 		mmc3: mmc@480ad000 {
@@ -352,6 +387,8 @@
 			interrupts = <0 94 0x4>;
 			ti,hwmods = "mmc3";
 			ti,needs-special-reset;
+			dmas = <&sdma 77>, <&sdma 78>;
+			dma-names = "tx", "rx";
 		};
 
 		mmc4: mmc@480d1000 {
@@ -360,6 +397,8 @@
 			interrupts = <0 96 0x4>;
 			ti,hwmods = "mmc4";
 			ti,needs-special-reset;
+			dmas = <&sdma 57>, <&sdma 58>;
+			dma-names = "tx", "rx";
 		};
 
 		mmc5: mmc@480d5000 {
@@ -368,6 +407,8 @@
 			interrupts = <0 59 0x4>;
 			ti,hwmods = "mmc5";
 			ti,needs-special-reset;
+			dmas = <&sdma 59>, <&sdma 60>;
+			dma-names = "tx", "rx";
 		};
 
 		keypad: keypad@4ae1c000 {
-- 
1.7.10.4

[PATCH V2 4/8] ARM: dts: Add GPMC node for OMAP2, OMAP4 and OMAP5

[Jon Hunter]

Add the device-tree node for GPMC on OMAP2, OMAP4 and OMAP5 devices.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
 arch/arm/boot/dts/omap2420.dtsi |   11 +++++++++++
 arch/arm/boot/dts/omap2430.dtsi |   11 +++++++++++
 arch/arm/boot/dts/omap4.dtsi    |   11 +++++++++++
 arch/arm/boot/dts/omap5.dtsi    |   11 +++++++++++
 4 files changed, 44 insertions(+)

diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
index af65609..d4ce6c2 100644
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -29,6 +29,17 @@
 			pinctrl-single,function-mask = <0x3f>;
 		};
 
+		gpmc: gpmc@6800a000 {
+			compatible = "ti,omap2420-gpmc";
+			reg = <0x6800a000 0x1000>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			interrupts = <20>;
+			gpmc,num-cs = <8>;
+			gpmc,num-waitpins = <4>;
+			ti,hwmods = "gpmc";
+		};
+
 		mcbsp1: mcbsp@48074000 {
 			compatible = "ti,omap2420-mcbsp";
 			reg = <0x48074000 0xff>;
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index c392445..832f184 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -29,6 +29,17 @@
 			pinctrl-single,function-mask = <0x3f>;
 		};
 
+		gpmc: gpmc@6e000000 {
+			compatible = "ti,omap2430-gpmc";
+			reg = <0x6e000000 0x1000>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			interrupts = <20>;
+			gpmc,num-cs = <8>;
+			gpmc,num-waitpins = <4>;
+			ti,hwmods = "gpmc";
+		};
+
 		mcbsp1: mcbsp@48074000 {
 			compatible = "ti,omap2430-mcbsp";
 			reg = <0x48074000 0xff>;
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 6669311..bcd64f5 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -196,6 +196,17 @@
 			#interrupt-cells = <1>;
 		};
 
+		gpmc: gpmc@50000000 {
+			compatible = "ti,omap4430-gpmc";
+			reg = <0x50000000 0x1000>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			interrupts = <0 20 0x4>;
+			gpmc,num-cs = <8>;
+			gpmc,num-waitpins = <4>;
+			ti,hwmods = "gpmc";
+		};
+
 		uart1: serial@4806a000 {
 			compatible = "ti,omap4-uart";
 			reg = <0x4806a000 0x100>;
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index f840499..61cbd1c 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -208,6 +208,17 @@
 			#interrupt-cells = <1>;
 		};
 
+		gpmc: gpmc@50000000 {
+			compatible = "ti,omap4430-gpmc";
+			reg = <0x50000000 0x1000>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			interrupts = <0 20 0x4>;
+			gpmc,num-cs = <8>;
+			gpmc,num-waitpins = <4>;
+			ti,hwmods = "gpmc";
+		};
+
 		i2c1: i2c@48070000 {
 			compatible = "ti,omap4-i2c";
 			reg = <0x48070000 0x100>;
-- 
1.7.10.4

[PATCH V2 5/8] ARM: dts: Add OMAP2 gpio bindings

[Jon Hunter]

Add gpios bindings for OMAP2420 and OMAP2430 devices.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
 arch/arm/boot/dts/omap2420.dtsi |   44 +++++++++++++++++++++++++++++++
 arch/arm/boot/dts/omap2430.dtsi |   55 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 99 insertions(+)

diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
index d4ce6c2..eee902f 100644
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -29,6 +29,50 @@
 			pinctrl-single,function-mask = <0x3f>;
 		};
 
+		gpio1: gpio@48018000 {
+			compatible = "ti,omap2-gpio";
+			reg = <0x48018000 0x200>;
+			interrupts = <29>;
+			ti,hwmods = "gpio1";
+			#gpio-cells = <2>;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		gpio2: gpio@4801a000 {
+			compatible = "ti,omap2-gpio";
+			reg = <0x4801a000 0x200>;
+			interrupts = <30>;
+			ti,hwmods = "gpio2";
+			#gpio-cells = <2>;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		gpio3: gpio@4801c000 {
+			compatible = "ti,omap2-gpio";
+			reg = <0x4801c000 0x200>;
+			interrupts = <31>;
+			ti,hwmods = "gpio3";
+			#gpio-cells = <2>;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		gpio4: gpio@4801e000 {
+			compatible = "ti,omap2-gpio";
+			reg = <0x4801e000 0x200>;
+			interrupts = <32>;
+			ti,hwmods = "gpio4";
+			#gpio-cells = <2>;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
 		gpmc: gpmc@6800a000 {
 			compatible = "ti,omap2420-gpmc";
 			reg = <0x6800a000 0x1000>;
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index 832f184..fb74382 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -29,6 +29,61 @@
 			pinctrl-single,function-mask = <0x3f>;
 		};
 
+		gpio1: gpio@4900c000 {
+			compatible = "ti,omap2-gpio";
+			reg = <0x4900c000 0x200>;
+			interrupts = <29>;
+			ti,hwmods = "gpio1";
+			#gpio-cells = <2>;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		gpio2: gpio@4900e000 {
+			compatible = "ti,omap2-gpio";
+			reg = <0x4900e000 0x200>;
+			interrupts = <30>;
+			ti,hwmods = "gpio2";
+			#gpio-cells = <2>;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		gpio3: gpio@49010000 {
+			compatible = "ti,omap2-gpio";
+			reg = <0x49010000 0x200>;
+			interrupts = <31>;
+			ti,hwmods = "gpio3";
+			#gpio-cells = <2>;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		gpio4: gpio@49012000 {
+			compatible = "ti,omap2-gpio";
+			reg = <0x49012000 0x200>;
+			interrupts = <32>;
+			ti,hwmods = "gpio4";
+			#gpio-cells = <2>;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		gpio5: gpio@480b6000 {
+			compatible = "ti,omap2-gpio";
+			reg = <0x480b6000 0x200>;
+			interrupts = <33>;
+			ti,hwmods = "gpio5";
+			#gpio-cells = <2>;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
 		gpmc: gpmc@6e000000 {
 			compatible = "ti,omap2430-gpmc";
 			reg = <0x6e000000 0x1000>;
-- 
1.7.10.4

[PATCH V2 6/8] ARM: dts: OMAP3+: Correct gpio #interrupts-cells property

[Jon Hunter]

The OMAP gpio binding documention [1] states that the #interrupts-cells
property for gpio controllers should be 2. Currently, for OMAP3+ devices
the #interrupt-cells is set to 1. By setting this property to 2, it
allows clients to pass a 2nd parameter indicating the sensitivity (level
or edge) and polarity (high or low) of the interrupt. The OMAP gpio
controllers support these options and so update the #interrupt-cells
property for OMAP3+ devices to 2.

[1] Documentation/devicetree/bindings/gpio/gpio-omap.txt

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
 arch/arm/boot/dts/omap3.dtsi |   12 ++++++------
 arch/arm/boot/dts/omap4.dtsi |   12 ++++++------
 arch/arm/boot/dts/omap5.dtsi |   16 ++++++++--------
 3 files changed, 20 insertions(+), 20 deletions(-)

diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 1dc72ea..badedc8 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -117,7 +117,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio2: gpio@49050000 {
@@ -126,7 +126,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio3: gpio@49052000 {
@@ -135,7 +135,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio4: gpio@49054000 {
@@ -144,7 +144,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio5: gpio@49056000 {
@@ -153,7 +153,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio6: gpio@49058000 {
@@ -162,7 +162,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		uart1: serial@4806a000 {
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index bcd64f5..bed47c5 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -138,7 +138,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio2: gpio@48055000 {
@@ -149,7 +149,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio3: gpio@48057000 {
@@ -160,7 +160,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio4: gpio@48059000 {
@@ -171,7 +171,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio5: gpio@4805b000 {
@@ -182,7 +182,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio6: gpio@4805d000 {
@@ -193,7 +193,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpmc: gpmc@50000000 {
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 61cbd1c..b4d2eb9 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -128,7 +128,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio2: gpio@48055000 {
@@ -139,7 +139,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio3: gpio@48057000 {
@@ -150,7 +150,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio4: gpio@48059000 {
@@ -161,7 +161,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio5: gpio@4805b000 {
@@ -172,7 +172,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio6: gpio@4805d000 {
@@ -183,7 +183,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio7: gpio@48051000 {
@@ -194,7 +194,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio8: gpio@48053000 {
@@ -205,7 +205,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpmc: gpmc@50000000 {
-- 
1.7.10.4

[PATCH V2 7/8] ARM: dts: OMAP3: Add reg and interrupt properties for gpio

[Jon Hunter]

The OMAP3 gpio bindings are currently missing the reg and interrupt
properties and so add these properties.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
 arch/arm/boot/dts/omap3.dtsi |   12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index badedc8..0cc65b5 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -113,6 +113,8 @@
 
 		gpio1: gpio@48310000 {
 			compatible = "ti,omap3-gpio";
+			reg = <0x48310000 0x200>;
+			interrupts = <29>;
 			ti,hwmods = "gpio1";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -122,6 +124,8 @@
 
 		gpio2: gpio@49050000 {
 			compatible = "ti,omap3-gpio";
+			reg = <0x49050000 0x200>;
+			interrupts = <30>;
 			ti,hwmods = "gpio2";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -131,6 +135,8 @@
 
 		gpio3: gpio@49052000 {
 			compatible = "ti,omap3-gpio";
+			reg = <0x49052000 0x200>;
+			interrupts = <31>;
 			ti,hwmods = "gpio3";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -140,6 +146,8 @@
 
 		gpio4: gpio@49054000 {
 			compatible = "ti,omap3-gpio";
+			reg = <0x49054000 0x200>;
+			interrupts = <32>;
 			ti,hwmods = "gpio4";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -149,6 +157,8 @@
 
 		gpio5: gpio@49056000 {
 			compatible = "ti,omap3-gpio";
+			reg = <0x49056000 0x200>;
+			interrupts = <33>;
 			ti,hwmods = "gpio5";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -158,6 +168,8 @@
 
 		gpio6: gpio@49058000 {
 			compatible = "ti,omap3-gpio";
+			reg = <0x49058000 0x200>;
+			interrupts = <34>;
 			ti,hwmods = "gpio6";
 			gpio-controller;
 			#gpio-cells = <2>;
-- 
1.7.10.4

[PATCH V2 8/8] ARM: dts: OMAP3: Add support for OMAP3430 SDP board

[Jon Hunter]

Adds basic device-tree support for OMAP3430 SDP board which has 256MB
of RAM, 128MB ONENAND flash, 256MB NAND flash and uses the TWL4030
power management IC.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
 arch/arm/boot/dts/Makefile         |    1 +
 arch/arm/boot/dts/omap3430-sdp.dts |  141 ++++++++++++++++++++++++++++++++++++
 2 files changed, 142 insertions(+)
 create mode 100644 arch/arm/boot/dts/omap3430-sdp.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index de29da5..a38dcd4 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -115,6 +115,7 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx28-tx28.dtb
 dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb
 dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
+	omap3430-sdp.dtb \
 	omap3-beagle.dtb \
 	omap3-beagle-xm.dtb \
 	omap3-evm.dtb \
diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
new file mode 100644
index 0000000..535a6f9
--- /dev/null
+++ b/arch/arm/boot/dts/omap3430-sdp.dts
@@ -0,0 +1,141 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+	model = "TI OMAP3430 SDP";
+	compatible = "ti,omap3430-sdp", "ti,omap3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+	};
+};
+
+/include/ "twl4030.dtsi"
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&gpmc {
+	ranges = <1 0 0x28000000 0x08000000>,
+		 <2 0 0x20000000 0x10000000>;
+
+	nand@1,0 {
+		linux,mtd-name= "micron,mt29f1g08abb";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <1 0 0x08000000>;
+		nand-bus-width = <8>;
+
+		ti,nand-ecc-opt = "sw";
+		gpmc,device-nand;
+		gpmc,cs-on = <0>;
+		gpmc,cs-rd-off = <36>;
+		gpmc,cs-wr-off = <36>;
+		gpmc,adv-on = <6>;
+		gpmc,adv-rd-off = <24>;
+		gpmc,adv-wr-off = <36>;
+		gpmc,oe-on = <6>;
+		gpmc,oe-off = <48>;
+		gpmc,we-on = <6>;
+		gpmc,we-off = <30>;
+		gpmc,rd-cycle = <72>;
+		gpmc,wr-cycle = <72>;
+		gpmc,access = <54>;
+		gpmc,wr-access = <30>;
+
+		partition@0 {
+			label = "xloader-nand";
+			reg = <0 0x80000>;
+		};
+		partition@0x80000 {
+			label = "bootloader-nand";
+			reg = <0x80000 0x140000>;
+		};
+		partition@0x1c0000 {
+			label = "params-nand";
+			reg = <0x1c0000 0xc0000>;
+		};
+		partition@0x280000 {
+			label = "kernel-nand";
+			reg = <0x280000 0x500000>;
+		};
+		partition@0x780000 {
+			label = "filesystem-nand";
+			reg = <0x780000 0x7880000>;
+		};
+	};
+
+	onenand@2,0 {
+		linux,mtd-name= "samsung,kfm2g16q2m-deb8";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <2 0 0x10000000>;
+
+		gpmc,device-width = <2>;
+		gpmc,mux-add-data = <2>;
+		gpmc,cs-on = <0>;
+		gpmc,cs-rd-off = <84>;
+		gpmc,cs-wr-off = <72>;
+		gpmc,adv-on = <0>;
+		gpmc,adv-rd-off = <18>;
+		gpmc,adv-wr-off = <18>;
+		gpmc,oe-on = <30>;
+		gpmc,oe-off = <84>;
+		gpmc,we-on = <0>;
+		gpmc,we-off = <42>;
+		gpmc,rd-cycle = <108>;
+		gpmc,wr-cycle = <96>;
+		gpmc,access = <78>;
+		gpmc,wr-data-mux-bus = <30>;
+
+		partition@0 {
+			label = "xloader-onenand";
+			reg = <0 0x80000>;
+		};
+		partition@0x80000 {
+			label = "bootloader-onenand";
+			reg = <0x80000 0x40000>;
+		};
+		partition@0xc0000 {
+			label = "params-onenand";
+			reg = <0xc0000 0x20000>;
+		};
+		partition@0xe0000 {
+			label = "kernel-onenand";
+			reg = <0xe0000 0x200000>;
+		};
+		partition@0x2e0000 {
+			label = "filesystem-onenand";
+			reg = <0x2e0000 0xfd20000>;
+		};
+	};
+};
-- 
1.7.10.4

Re: [PATCH V2 0/8] ARM: dts: Various OMAP2+ device-tree updates

[Benoit Cousson]

Hi Jon,

On 03/15/2013 02:57 PM, Jon Hunter wrote:
> Various OMAP device-tree updates for PMU, DMA, GPIO, GPMC and boards.
> 
> The DMA, PMU and OMAP3430 SDP board changes have been sent before
> individually but re-sending here as a complete series for v3.10.
> 
> This is based upon Benoit's for_3.10/dts branch [1]. Branch available
> here [2].
> 
> V2 changes:
> - Rebased on Benoit's for_3.10/dts branch
> - Squashed patches adding support for OMAP3430 SDP board and patch
>   to add flash support for OMAP3430 SDP board.
> 
> [1] http://git.kernel.org/cgit/linux/kernel/git/bcousson/linux-omap-dt.git/log/?h=for_3.10/dts
> [2] git://github.com/jonhunter/linux.git omap-dt-for-v3.10

Thanks for the repost. I've just applied your branch in my for_3.10/dts
branch.

Regards,
Benoit


> Jon Hunter (8):
>   ARM: OMAP2+: Prepare for device-tree PMU support
>   ARM: dts: OMAP2+: Add PMU nodes
>   ARM: dts: OMAP2+: Add SDMA controller bindings and nodes
>   ARM: dts: Add GPMC node for OMAP2, OMAP4 and OMAP5
>   ARM: dts: Add OMAP2 gpio bindings
>   ARM: dts: OMAP3+: Correct gpio #interrupts-cells property
>   ARM: dts: OMAP3: Add reg and interrupt properties for gpio
>   ARM: dts: OMAP3: Add support for OMAP3430 SDP board
> 
>  arch/arm/boot/dts/Makefile           |    1 +
>  arch/arm/boot/dts/omap2.dtsi         |   17 ++++
>  arch/arm/boot/dts/omap2420.dtsi      |   55 +++++++++++++
>  arch/arm/boot/dts/omap2430.dtsi      |   66 ++++++++++++++++
>  arch/arm/boot/dts/omap3.dtsi         |   70 +++++++++++++++--
>  arch/arm/boot/dts/omap3430-sdp.dts   |  141 ++++++++++++++++++++++++++++++++++
>  arch/arm/boot/dts/omap4-panda-es.dts |    2 +
>  arch/arm/boot/dts/omap4.dtsi         |   64 +++++++++++++--
>  arch/arm/boot/dts/omap4460.dtsi      |   18 +++++
>  arch/arm/boot/dts/omap5.dtsi         |   68 ++++++++++++++--
>  arch/arm/mach-omap2/pmu.c            |   14 +++-
>  11 files changed, 493 insertions(+), 23 deletions(-)
>  create mode 100644 arch/arm/boot/dts/omap3430-sdp.dts
>  create mode 100644 arch/arm/boot/dts/omap4460.dtsi
> 

Re: [PATCH V2 0/8] ARM: dts: Various OMAP2+ device-tree updates

[Anil Kumar]

Hi Benoit,

On Fri, Mar 15, 2013 at 8:00 PM, Benoit Cousson <b-cousson@ti.com> wrote:
> Hi Jon,
>
> On 03/15/2013 02:57 PM, Jon Hunter wrote:
>> Various OMAP device-tree updates for PMU, DMA, GPIO, GPMC and boards.
>>
>> The DMA, PMU and OMAP3430 SDP board changes have been sent before
>> individually but re-sending here as a complete series for v3.10.
>>
>> This is based upon Benoit's for_3.10/dts branch [1]. Branch available
>> here [2].
>>
>> V2 changes:
>> - Rebased on Benoit's for_3.10/dts branch
>> - Squashed patches adding support for OMAP3430 SDP board and patch
>>   to add flash support for OMAP3430 SDP board.
>>
>> [1] http://git.kernel.org/cgit/linux/kernel/git/bcousson/linux-omap-dt.git/log/?h=for_3.10/dts
>> [2] git://github.com/jonhunter/linux.git omap-dt-for-v3.10
>
> Thanks for the repost. I've just applied your branch in my for_3.10/dts
> branch.

I think you missed below patch which is needed for gpmc nand to work fine.
Without this patch nand will not work on OMAP3430 SDP board.

Jon Hunter:-
  ARM: OMAP2+: Fix-up gpmc merge error

Thanks,
Anil

Re: [PATCH V2 0/8] ARM: dts: Various OMAP2+ device-tree updates

[Benoit Cousson]

Hi Anil,

On 03/17/2013 10:35 AM, Anil Kumar wrote:
> Hi Benoit,
> 
> On Fri, Mar 15, 2013 at 8:00 PM, Benoit Cousson <b-cousson@ti.com> wrote:
>> Hi Jon,
>>
>> On 03/15/2013 02:57 PM, Jon Hunter wrote:
>>> Various OMAP device-tree updates for PMU, DMA, GPIO, GPMC and boards.
>>>
>>> The DMA, PMU and OMAP3430 SDP board changes have been sent before
>>> individually but re-sending here as a complete series for v3.10.
>>>
>>> This is based upon Benoit's for_3.10/dts branch [1]. Branch available
>>> here [2].
>>>
>>> V2 changes:
>>> - Rebased on Benoit's for_3.10/dts branch
>>> - Squashed patches adding support for OMAP3430 SDP board and patch
>>>   to add flash support for OMAP3430 SDP board.
>>>
>>> [1] http://git.kernel.org/cgit/linux/kernel/git/bcousson/linux-omap-dt.git/log/?h=for_3.10/dts
>>> [2] git://github.com/jonhunter/linux.git omap-dt-for-v3.10
>>
>> Thanks for the repost. I've just applied your branch in my for_3.10/dts
>> branch.
> 
> I think you missed below patch which is needed for gpmc nand to work fine.
> Without this patch nand will not work on OMAP3430 SDP board.
> 
> Jon Hunter:-
>   ARM: OMAP2+: Fix-up gpmc merge error

Well, that patch is not part of Jon's series and it looks like it was
posted for 3.9-rc3.
BTW, Paul W is just reporting a regression about that patch.

Anyway, I'll rebase on top of -rc3 to get the latest fixes.

Regards,
Benoit