[PATCH V2 0/4] ARM: tegra: dalmore: add regulators

[PATCH V2 0/4] ARM: tegra: dalmore: add regulators

[Laxman Dewangan]

This series add the regulators for Dalmore platform.
Dalmore also have the Palma PMIC as primary PMIC but 
dt population will be send later once DT documentation
finalize.

Changes from V1:
- Rearrange patches so that config change will be last patch.
- Correct some sentence and Caps.
- fix compilation issue arise in mid of patches.

Laxman Dewangan (4):
  ARM: tegra: dalmore: add cpu regulator node
  ARM: tegra: dalmore: add TPS65090 node
  ARM: tegra: dalmore: add fixed regulator node
  ARM: tegra: enable Tegra114 based platform PMICs

 arch/arm/boot/dts/tegra114-dalmore.dts |  162 ++++++++++++++++++++++++++++++++
 arch/arm/configs/tegra_defconfig       |    7 ++
 2 files changed, 169 insertions(+), 0 deletions(-)

[PATCH V2 1/4] ARM: tegra: dalmore: add cpu regulator node

[Laxman Dewangan]

Dalmore uses the TPS51632 as CPU regulator. The device is connected
on I2C5.

Add DT node for TPS51632.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
 arch/arm/boot/dts/tegra114-dalmore.dts |   15 +++++++++++++++
 1 files changed, 15 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index a61974e..6be9434 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -718,6 +718,21 @@
 		clock-frequency = <408000000>;
 	};
 
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		tps51632 {
+			compatible = "ti,tps51632";
+			reg = <0x43>;
+			regulator-name = "vdd-cpu";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1520000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+
 	pmc {
 		nvidia,invert-interrupt;
 	};
-- 
1.7.1.1

Re: [PATCH V2 1/4] ARM: tegra: dalmore: add cpu regulator node

[Sergei Shtylyov]

Hello.

On 21-03-2013 17:47, Laxman Dewangan wrote:

> Dalmore uses the TPS51632 as CPU regulator. The device is connected
> on I2C5.

> Add DT node for TPS51632.

> Signed-off-by: Laxman Dewangan <ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> ---
>   arch/arm/boot/dts/tegra114-dalmore.dts |   15 +++++++++++++++
>   1 files changed, 15 insertions(+), 0 deletions(-)

> diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
> index a61974e..6be9434 100644
> --- a/arch/arm/boot/dts/tegra114-dalmore.dts
> +++ b/arch/arm/boot/dts/tegra114-dalmore.dts
> @@ -718,6 +718,21 @@
>   		clock-frequency = <408000000>;
>   	};
>
> +	i2c@7000d000 {
> +		status = "okay";
> +		clock-frequency = <400000>;
> +
> +		tps51632 {

    Should be named "tps51632@43" I think.

> +			compatible = "ti,tps51632";
> +			reg = <0x43>;

WBR, Sergei

Re: [PATCH V2 1/4] ARM: tegra: dalmore: add cpu regulator node

[Stephen Warren]

On 03/21/2013 08:07 AM, Sergei Shtylyov wrote:
> Hello.
> 
> On 21-03-2013 17:47, Laxman Dewangan wrote:
> 
>> Dalmore uses the TPS51632 as CPU regulator. The device is connected
>> on I2C5.
> 
>> Add DT node for TPS51632.

>> diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts

>> +    i2c@7000d000 {
>> +        status = "okay";
>> +        clock-frequency = <400000>;
>> +
>> +        tps51632 {
> 
>    Should be named "tps51632@43" I think.

The unit-address (i.e. "@43" part) of the node name is typically omitted
if it isn't required to make the node name unique.

[PATCH V2 2/4] ARM: tegra: dalmore: add TPS65090 node

[Laxman Dewangan]

NVIDIA's Tegra114 reference platform, Dalmore, uses the TPS65090 as
secondary PMICs which is mainly act as voltage switch regulator
controlled by i2c communication.

Add DT node for TPS65090.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
Changes from V1:
- Fix compilation error on this patch which was introduced on prev set.

 arch/arm/boot/dts/tegra114-dalmore.dts |   92 ++++++++++++++++++++++++++++++++
 1 files changed, 92 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index 6be9434..6e9d757 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -731,6 +731,83 @@
 			regulator-boot-on;
 			regulator-always-on;
 		};
+
+		tps65090@48 {
+			compatible = "ti,tps65090";
+			reg = <0x48>;
+			interrupt-parent = <&gpio>;
+			interrupts = <72 0x04>; /* gpio PJ0 */
+
+			vsys1-supply = <&vdd_ac_bat_reg>;
+			vsys2-supply = <&vdd_ac_bat_reg>;
+			vsys3-supply = <&vdd_ac_bat_reg>;
+			infet1-supply = <&vdd_ac_bat_reg>;
+			infet2-supply = <&vdd_ac_bat_reg>;
+			infet3-supply = <&tps65090_dcdc2_reg>;
+			infet4-supply = <&tps65090_dcdc2_reg>;
+			infet5-supply = <&tps65090_dcdc2_reg>;
+			infet6-supply = <&tps65090_dcdc2_reg>;
+			infet7-supply = <&tps65090_dcdc2_reg>;
+			vsys-l1-supply = <&vdd_ac_bat_reg>;
+			vsys-l2-supply = <&vdd_ac_bat_reg>;
+
+			regulators {
+				dcdc1 {
+					regulator-name = "vdd-sys-5v0";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				tps65090_dcdc2_reg: dcdc2 {
+					regulator-name = "vdd-sys-3v3";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				dcdc3 {
+					regulator-name = "vdd-ao";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				fet1 {
+					regulator-name = "vdd-lcd-bl";
+				};
+
+				fet3 {
+					regulator-name = "vdd-modem-3v3";
+				};
+
+				fet4 {
+					regulator-name = "avdd-lcd";
+				};
+
+				fet5 {
+					regulator-name = "vdd-lvds";
+				};
+
+				fet6 {
+					regulator-name = "vdd-sd-slot";
+					regulator-boot-on;
+				};
+
+				fet7 {
+					regulator-name = "vdd-com-3v3";
+				};
+
+				ldo1 {
+					regulator-name = "vdd-sby-5v0";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo2 {
+					regulator-name = "vdd-sby-3v3";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
 	};
 
 	pmc {
@@ -747,4 +824,19 @@
 		bus-width = <8>;
 		status = "okay";
 	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_ac_bat_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vdd_ac_bat";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+	};
 };
-- 
1.7.1.1

[PATCH V2 3/4] ARM: tegra: dalmore: add fixed regulator node

[Laxman Dewangan]

NVIDIA's Tegra114 reference platform Dalmore has voltage switch
regulators which are controlled by the Tegra GPIOs.

Add DT node for fixed regulators.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
 arch/arm/boot/dts/tegra114-dalmore.dts |   57 +++++++++++++++++++++++++++++++-
 1 files changed, 56 insertions(+), 1 deletions(-)

diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index 6e9d757..6ad1f45 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -752,7 +752,7 @@
 			vsys-l2-supply = <&vdd_ac_bat_reg>;
 
 			regulators {
-				dcdc1 {
+				tps65090_dcdc1_reg: dcdc1 {
 					regulator-name = "vdd-sys-5v0";
 					regulator-always-on;
 					regulator-boot-on;
@@ -838,5 +838,60 @@
 			regulator-max-microvolt = <5000000>;
 			regulator-always-on;
 		};
+
+		dvdd_ts_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "dvdd_ts";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			enable-active-high;
+			gpio = <&gpio 61 0>; /* GPIO PH5 */
+		};
+
+		lcd_bl_en_reg: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "lcd_bl_en";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio 58 0>; /* GPIO PH2 */
+		};
+
+		usb1_vbus_reg: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio 108 0>; /* GPIO PN4 */
+			gpio-open-drain;
+			vin-supply = <&tps65090_dcdc1_reg>;
+		};
+
+		usb3_vbus_reg: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "usb2_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio 86 0>; /* GPIO PK6 */
+			gpio-open-drain;
+			vin-supply = <&tps65090_dcdc1_reg>;
+		};
+
+		vdd_hdmi_reg: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "vdd_hdmi_5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio 81 0>; /* GPIO PK1 */
+			vin-supply = <&tps65090_dcdc1_reg>;
+		};
 	};
 };
-- 
1.7.1.1

[PATCH V2 4/4] ARM: tegra: enable Tegra114 based platform PMICs

[Laxman Dewangan]

NVIDIA's Tegra114 has two reference platforms, Dalmore and Pluto.
Dalmore uses following PMICs:
- TPS65913 as primary PMIC.
- TPS65090 as secondary PMIC used for switch regulators and battery charging.
- TPS51632 for CPU regulator.

Pluto uses only TPS65913.

Enable config variable for these PMICs for Dalomore and Pluto.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
Changes from V1:
- Rearrange patch to make it 4th patch.

 arch/arm/configs/tegra_defconfig |    7 +++++++
 1 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index aba4881..34b9342 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -126,6 +126,7 @@ CONFIG_SPI=y
 CONFIG_SPI_TEGRA20_SFLASH=y
 CONFIG_SPI_TEGRA20_SLINK=y
 CONFIG_GPIO_PCA953X_IRQ=y
+CONFIG_GPIO_PALMAS=y
 CONFIG_GPIO_TPS6586X=y
 CONFIG_GPIO_TPS65910=y
 CONFIG_POWER_SUPPLY=y
@@ -136,12 +137,17 @@ CONFIG_SENSORS_LM90=y
 CONFIG_MFD_TPS6586X=y
 CONFIG_MFD_TPS65910=y
 CONFIG_MFD_MAX8907=y
+CONFIG_MFD_TPS65090=y
+CONFIG_MFD_PALMAS=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_MAX8907=y
+CONFIG_REGULATOR_PALMAS=y
+CONFIG_REGULATOR_TPS51632=y
 CONFIG_REGULATOR_TPS62360=y
+CONFIG_REGULATOR_TPS65090=y
 CONFIG_REGULATOR_TPS6586X=y
 CONFIG_REGULATOR_TPS65910=y
 CONFIG_MEDIA_SUPPORT=y
@@ -191,6 +197,7 @@ CONFIG_RTC_INTF_SYSFS=y
 CONFIG_RTC_INTF_PROC=y
 CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_MAX8907=y
+CONFIG_RTC_DRV_PALMAS=y
 CONFIG_RTC_DRV_TPS6586X=y
 CONFIG_RTC_DRV_TPS65910=y
 CONFIG_RTC_DRV_EM3027=y
-- 
1.7.1.1

Re: [PATCH V2 0/4] ARM: tegra: dalmore: add regulators

[Stephen Warren]

On 03/21/2013 07:47 AM, Laxman Dewangan wrote:
> This series add the regulators for Dalmore platform.
> Dalmore also have the Palma PMIC as primary PMIC but 
> dt population will be send later once DT documentation
> finalize.

The series is applied. The first 3 patches to Tegra's for-3.10/dt
branch, and patch 4 to Tegra's for-3.10/defconfig banch.

In patch 2,

> +		tps65090@48 {

I removed "@48" there, since the unit-address isn't required to make the
node name unique.