From mboxrd@z Thu Jan 1 00:00:00 1970 From: Florian Fainelli Subject: Re: [PATCH 0/4 v3] mv643xx_eth: use mvmdio MDIO bus driver Date: Fri, 22 Mar 2013 15:24:55 +0100 Message-ID: <514C69B7.8090106@openwrt.org> References: <1363284515-9865-1-git-send-email-florian@openwrt.org> <1363959568-16976-1-git-send-email-florian@openwrt.org> <20130322141423.GJ13280@titan.lakedaemon.net> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: <20130322141423.GJ13280@titan.lakedaemon.net> Sender: linux-kernel-owner@vger.kernel.org To: Jason Cooper Cc: davem@davemloft.net, Grant Likely , Rob Herring , Rob Landley , Andrew Lunn , Russell King , Benjamin Herrenschmidt , Paul Mackerras , Lennert Buytenhek , Thomas Petazzoni , Greg Kroah-Hartman , devicetree-discuss@lists.ozlabs.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linuxppc-dev@lists.ozlabs.org, netdev@vger.kernel.org List-Id: devicetree@vger.kernel.org Le 03/22/13 15:14, Jason Cooper a =C3=A9crit : > On Fri, Mar 22, 2013 at 02:39:24PM +0100, Florian Fainelli wrote: >> Hi all, >> >> This patch converts the mv643xx_eth driver to use the mvmdio MDIO bu= s driver >> instead of rolling its own implementation. As a result, all users of= this >> mv643xx_eth driver are converted to register an "orion-mdio" platfor= m_device. >> The mvmdio driver is also updated to support an interrupt line which= reports >> SMI error/completion, and to allow traditionnal platform device regi= stration >> instead of just device tree. >> >> David, I think it makes sense for you to merge all of this, since we= do >> not want the architecture files to be desynchronized from the mv643x= x_eth to >> avoid runtime breakage. The potential for merge conflicts should be = very small. >> >> Florian Fainelli (4): >> net: mvmdio: allow platform device style registration >> net: mvmdio: rename base register cookie from smireg to regs >> net: mvmdio: enhance driver to support SMI error/done interrupts >> mv643xx_eth: convert to use the Marvell Orion MDIO driver >> >> .../devicetree/bindings/net/marvell-orion-mdio.txt | 3 + >> arch/arm/plat-orion/common.c | 54 +++--- >> arch/powerpc/platforms/chrp/pegasos_eth.c | 20 ++ >> arch/powerpc/sysdev/mv64x60_dev.c | 16 +- >> drivers/net/ethernet/marvell/Kconfig | 5 +- >> drivers/net/ethernet/marvell/Makefile | 2 +- >> drivers/net/ethernet/marvell/mv643xx_eth.c | 195 ++------= ------------ >> drivers/net/ethernet/marvell/mvmdio.c | 130 ++++++++= ++--- >> include/linux/mv643xx_eth.h | 1 - >> 9 files changed, 187 insertions(+), 239 deletions(-) > > Whole series applied on top of v3.9-rc3 and tested on dreamplug > (kirkwood DT boot with legacy mv643xx_eth init) Ok, thanks! Does that mean that you want these changes to go via your=20 tree? David initially applied my v2 of this patchset, and since it=20 thouches mostly ethernet driver stuff, I would rather make it go via hi= s=20 tree if both of you agree. -- =46lorian