Re: [PATCH v3] USB: PHY: Palmas USB Transceiver Driver

[Laxman Dewangan <ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>]

On Monday 25 March 2013 03:02 PM, Kishon Vijay Abraham I wrote:
> From: Graeme Gregory <gg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org>
>
> This is the driver for the OTG transceiver built into the Palmas chip. It
> handles the various USB OTG events that can be generated by cable
> insertion/removal.
>
> Signed-off-by: Graeme Gregory <gg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org>
> Signed-off-by: Moiz Sonasath <m-sonasath-l0cyMroinI0@public.gmane.org>
> Signed-off-by: Ruchika Kharwar <ruchika-l0cyMroinI0@public.gmane.org>
> Signed-off-by: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
> Signed-off-by: Sebastien Guiriec <s-guiriec-l0cyMroinI0@public.gmane.org>
> ---

I think this driver is more over the cable connection like vbus 
detetcion or ID pin detection.
Then why not it is implemented based on extcon framework?

That way, generic usb driver (like tegra_usb driver) will get 
notification through extcon.

We need this cable detection through extcon on our tegra solution 
through the Palmas.


+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+static int palmas_usb_read(struct palmas *palmas, unsigned int reg,
+               unsigned int *dest)
+{
+       unsigned int addr;
+       int slave;
+
+       slave = PALMAS_BASE_TO_SLAVE(PALMAS_USB_OTG_BASE);
+       addr = PALMAS_BASE_TO_REG(PALMAS_USB_OTG_BASE, reg);
+
+       return regmap_read(palmas->regmap[slave], addr, dest);


Please use the generic api for palmas_read()/palmas_write(0 as it will 
be ease on debugging on register access.
Direct regmap_read() does not help much on this.

> +}
> +
> +static int palmas_usb_write(struct palmas *palmas, unsigned int reg,
> +               unsigned int data)
> +{
> +       unsigned int addr;
> +       int slave;
> +
> +       slave = PALMAS_BASE_TO_SLAVE(PALMAS_USB_OTG_BASE);
> +       addr = PALMAS_BASE_TO_REG(PALMAS_USB_OTG_BASE, reg);
> +
> +       return regmap_write(palmas->regmap[slave], addr, data);

Same as above.



> +
> +       if (status != OMAP_DWC3_UNKNOWN) {
> +               palmas_usb->linkstat = status;
> +               palmas_usb->mailboxstat = dwc3_omap_mailbox(status);
Omap specific call, why? This is generic palma driver.


> +

> +       palmas_usb->dev         = &pdev->dev;
> +
> +       palmas_usb->irq1 = regmap_irq_get_virq(palmas->irq_data,
> +                                               PALMAS_ID_OTG_IRQ);
> +       palmas_usb->irq2 = regmap_irq_get_virq(palmas->irq_data,
> +                                               PALMAS_ID_IRQ);
> +       palmas_usb->irq3 = regmap_irq_get_virq(palmas->irq_data,
> +                                               PALMAS_VBUS_OTG_IRQ);
> +       palmas_usb->irq4 = regmap_irq_get_virq(palmas->irq_data,
> +                                               PALMAS_VBUS_IRQ);

Should be come from platform_get_irq() through platform driver.



--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html