From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: devicetree-discuss@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 8/8] ARM: at91: sam9263ek: add dt lcd support
Date: Tue, 16 Apr 2013 16:54:01 +0200 [thread overview]
Message-ID: <516D6609.5020706@atmel.com> (raw)
In-Reply-To: <1365692422-9565-8-git-send-email-plagnioj@jcrosoft.com>
On 04/11/2013 05:00 PM, Jean-Christophe PLAGNIOL-VILLARD :
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
> ---
> arch/arm/boot/dts/at91sam9263ek.dts | 30 ++++++++++++++++++++++++++++++
> 1 file changed, 30 insertions(+)
>
> diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
> index 1eb0872..d471b49 100644
> --- a/arch/arm/boot/dts/at91sam9263ek.dts
> +++ b/arch/arm/boot/dts/at91sam9263ek.dts
> @@ -81,6 +81,36 @@
> };
> };
>
> + fb0: fb@0x00500000 {
Ditto: Not good address: 0x700000
> + display = <&display0>;
> + status = "okay";
> +
> + display0: display {
> + bits-per-pixel = <16>;
> + atmel,lcdcon-backlight;
> + atmel,dmacon = <0x1>;
> + atmel,lcdcon2 = <0x80008002>;
> + atmel,guard-time = <1>;
> +
> + display-timings {
> + native-mode = <&timing0>;
> + timing0: timing0 {
> + clock-frequency = <4965000>;
> + hactive = <240>;
> + vactive = <320>;
> + hback-porch = <1>;
> + hfront-porch = <33>;
> + vback-porch = <1>;
> + vfront-porch = <0>;
> + hsync-len = <5>;
> + vsync-len = <1>;
> + hsync-active = <1>;
> + vsync-active = <1>;
> + };
> + };
> + };
> + };
Otherwise, seems good.
> +
> nand0: nand@40000000 {
> nand-bus-width = <8>;
> nand-ecc-mode = "soft";
>
--
Nicolas Ferre
next prev parent reply other threads:[~2013-04-16 14:54 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-11 14:57 [PATCH 0/8] ARM: at91: atmel_lcdc: add DT support Jean-Christophe PLAGNIOL-VILLARD
2013-04-11 15:00 ` [PATCH 1/8] video: atmel_lcdfb: fix platform data struct Jean-Christophe PLAGNIOL-VILLARD
2013-04-11 15:00 ` [PATCH 2/8] video: atmel_lcdfb: introduce atmel_lcdfb_power_control Jean-Christophe PLAGNIOL-VILLARD
[not found] ` <1365692422-9565-2-git-send-email-plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org>
2013-04-16 12:35 ` Nicolas Ferre
2013-04-11 15:00 ` [PATCH 3/8] video: atmel_lcdfb: pass the pdata as params Jean-Christophe PLAGNIOL-VILLARD
[not found] ` <1365692422-9565-3-git-send-email-plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org>
2013-04-16 12:38 ` Nicolas Ferre
2013-04-11 15:00 ` [PATCH 4/8] video: atmel_lcdfb: add device tree suport Jean-Christophe PLAGNIOL-VILLARD
2013-04-16 13:42 ` Nicolas Ferre
2013-04-16 13:44 ` Jean-Christophe PLAGNIOL-VILLARD
2013-04-16 15:43 ` Nicolas Ferre
[not found] ` <1365692422-9565-4-git-send-email-plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org>
2013-05-29 15:01 ` Richard Genoud
2013-04-11 15:00 ` [PATCH 5/8] ARM: at91: sam9g45: add lcd support Jean-Christophe PLAGNIOL-VILLARD
2013-04-16 13:57 ` Nicolas Ferre
2013-04-16 14:00 ` Nicolas Ferre
[not found] ` <516D5991.8020603-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2013-04-16 15:12 ` Nicolas Ferre
2013-04-11 15:00 ` [PATCH 6/8] ARM: at91: sam9263: add fb dt support Jean-Christophe PLAGNIOL-VILLARD
2013-04-16 14:11 ` Nicolas Ferre
2013-04-16 14:13 ` Jean-Christophe PLAGNIOL-VILLARD
2013-04-16 15:11 ` Nicolas Ferre
2013-04-16 15:48 ` Jean-Christophe PLAGNIOL-VILLARD
2013-04-11 15:00 ` [PATCH 7/8] ARM: at91: at9sam9m10g45ek: add dt lcd support Jean-Christophe PLAGNIOL-VILLARD
2013-04-16 14:56 ` Nicolas Ferre
2013-04-11 15:00 ` [PATCH 8/8] ARM: at91: sam9263ek: " Jean-Christophe PLAGNIOL-VILLARD
2013-04-16 14:54 ` Nicolas Ferre [this message]
2013-04-12 9:52 ` [PATCH 1/8] video: atmel_lcdfb: fix platform data struct Hans-Christian Egtvedt
2013-04-16 12:33 ` Nicolas Ferre
[not found] ` <1365692422-9565-1-git-send-email-plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org>
2013-05-29 14:36 ` Richard Genoud
2013-05-29 17:35 ` Jean-Christophe PLAGNIOL-VILLARD
[not found] ` <20130529173538.GC23899-RQcB7r2h9QmfDR2tN2SG5Ni2O/JbrIOy@public.gmane.org>
2013-05-29 17:44 ` Richard Genoud
[not found] ` <CACQ1gAhhsMw1-Znd8BC=A0rJBrB4pphCtH9v9qOQR+j2dY3vCw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-05-29 19:32 ` Jean-Christophe PLAGNIOL-VILLARD
[not found] ` <20130529193220.GB19468-RQcB7r2h9QmfDR2tN2SG5Ni2O/JbrIOy@public.gmane.org>
2013-05-30 6:39 ` Richard Genoud
2013-05-30 7:23 ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-30 14:05 ` Hans-Christian Egtvedt
2013-05-30 14:27 ` Andreas Bießmann
2013-05-30 14:59 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=516D6609.5020706@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=plagnioj@jcrosoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).