From: Kishon Vijay Abraham I <kishon@ti.com>
To: "myungjoo.ham" <myungjoo.ham@samsung.com>,
Graeme Gregory <gg@slimlogic.co.uk>
Cc: cw00.choi@samsung.com, balbi@ti.com, ldewangan@nvidia.com,
devicetree-discuss@lists.ozlabs.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org, grant.likely@linaro.org,
rob.herring@calxeda.com, rob@landley.net, ruchika@ti.com,
tony@atomide.com, sameo@linux.intel.com,
broonie@opensource.wolfsonmicro.com
Subject: Re: [PATCH v4] extcon: Palmas Extcon Driver
Date: Wed, 22 May 2013 11:53:21 +0530 [thread overview]
Message-ID: <519C6459.7000604@ti.com> (raw)
In-Reply-To: <51888F45.4030303@ti.com>
Hi,
On Tuesday 07 May 2013 10:51 AM, Kishon Vijay Abraham I wrote:
> Hi,
>
> On Tuesday 07 May 2013 06:13 AM, myungjoo.ham wrote:
>>> From: Graeme Gregory <gg@slimlogic.co.uk>
>>>
>>> This is the driver for the USB comparator built into the palmas chip. It
>>> handles the various USB OTG events that can be generated by cable
>>> insertion/removal.
>>>
>>> Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk>
>>> Signed-off-by: Moiz Sonasath <m-sonasath@ti.com>
>>> Signed-off-by: Ruchika Kharwar <ruchika@ti.com>
>>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>>> [kishon@ti.com: adapted palmas usb driver to use the extcon framework]
>>> Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com>
>>
>> Here goes some comments in the code:
>>
>> []
>>
>>> diff --git a/drivers/extcon/extcon-palmas.c
>> b/drivers/extcon/extcon-palmas.c
>>> new file mode 100644
>>> index 0000000..3ef042f
>>> --- /dev/null
>>> +++ b/drivers/extcon/extcon-palmas.c
>>> @@ -0,0 +1,389 @@
>>> +/*
>>> + * Palmas USB transceiver driver
>>> + *
>>> + * Copyright (C) 2013 Texas Instruments Incorporated -
>>> http://www.ti.com
>>> + * This program is free software; you can redistribute it and/or modify
>>> + * it under the terms of the GNU General Public License as published by
>>> + * the Free Software Foundation; either version 2 of the License, or
>>> + * (at your option) any later version.
>>> + *
>>> + * Author: Graeme Gregory <gg@...mlogic.co.uk>
>>> + * Author: Kishon Vijay Abraham I <kishon@...com>
>>> + *
>>> + * Based on twl6030_usb.c
>>> + *
>>> + * Author: Hema HK <hemahk@...com>
>>> + *
>>> + * This program is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>> + * GNU General Public License for more details.
>>> + */
>>
>> Why the email addresses are masked in the source code?
>> (I'm just curious as this is the first time to see such in kernel source)
>
> That was not intentional. Took the previous version from the net. My bad.
>>
>>> +
>>> +#include <linux/module.h>
>>> +#include <linux/init.h>
>>> +#include <linux/interrupt.h>
>>> +#include <linux/platform_device.h>
>>> +#include <linux/io.h>
>>> +#include <linux/usb/phy_companion.h>
>>> +#include <linux/regulator/consumer.h>
>>> +#include <linux/err.h>
>>> +#include <linux/notifier.h>
>>> +#include <linux/slab.h>
>>> +#include <linux/delay.h>
>>> +#include <linux/mfd/palmas.h>
>>> +#include <linux/of.h>
>>> +#include <linux/of_platform.h>
>>> +#include <linux/extcon/extcon_palmas.h>
>>> +
>>> +static const char *palmas_extcon_cable[] = {
>>> + [0] = "USB",
>>> + [1] = "USB-HOST",
>>
>> [1] = "USB-Host",
>>
>>> + NULL,
>>> +};
>>> +
>>> +static const int mutually_exclusive[] = {0x3, 0x0};
>>> +
>>> +static void palmas_usb_wakeup(struct palmas *palmas, int enable)
>>> +{
>>> + if (enable)
>>> + palmas_write(palmas, PALMAS_USB_OTG_BASE, PALMAS_USB_WAKEUP,
>>> + PALMAS_USB_WAKEUP_ID_WK_UP_COMP);
>>> + else
>>> + palmas_write(palmas, PALMAS_USB_OTG_BASE, PALMAS_USB_WAKEUP,
>> 0);
>>> +}
>>> +
>>> +static ssize_t palmas_usb_vbus_show(struct device *dev,
>>> + struct device_attribute *attr, char *buf)
>>> +{
>>> + unsigned long flags;
>>> + int ret = -EINVAL;
>>> + struct palmas_usb *palmas_usb = dev_get_drvdata(dev);
>>> +
>>> + spin_lock_irqsave(&palmas_usb->lock, flags);
>>
>> This spinlock is used in this sysfs-show function only.
>> Is this really needed?
>> The only protected value here is "linkstat", which is "readonly"
>> in this protected context.
>> Thus, removing the spin_lock and updating like the following should
>> be the same with less overhead:
>>
>> int linkstat = palmas_usb->linkstat;
>> switch(linkstat) {
>
> hmm.. ok.
I think this is to do with disabling interrupts while reporting the VBUS
state. (linkstat is updated in irq handler). So this should be fine I guess?
Thanks
Kishon
next prev parent reply other threads:[~2013-05-22 6:23 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-07 13:21 [PATCH v2 0/4] usb: added palmas-usb driver and a few misc fixes Kishon Vijay Abraham I
[not found] ` <1362662506-14823-1-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
2013-03-07 13:21 ` [PATCH v2 1/4] usb: dwc3: set dma_mask for dwc3_omap device Kishon Vijay Abraham I
2013-03-07 13:21 ` [PATCH v2 2/4] usb: dwc3: dwc3-omap: return -EPROBE_DEFER if probe has not yet executed Kishon Vijay Abraham I
2013-03-07 13:21 ` [PATCH v2 3/4] USB: Palmas OTG Transceiver Driver Kishon Vijay Abraham I
[not found] ` <1362662506-14823-4-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
2013-03-14 13:56 ` Felipe Balbi
2013-03-14 14:53 ` kishon
2013-03-25 9:32 ` [PATCH v3] USB: PHY: Palmas USB " Kishon Vijay Abraham I
[not found] ` <1364203926-24488-1-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
2013-03-25 9:46 ` Laxman Dewangan
2013-03-26 6:03 ` Kishon Vijay Abraham I
2013-03-26 9:01 ` Graeme Gregory
2013-03-26 9:12 ` Laxman Dewangan
2013-03-26 9:27 ` Graeme Gregory
2013-03-26 9:34 ` Laxman Dewangan
2013-03-26 9:51 ` Graeme Gregory
2013-03-26 11:28 ` Laxman Dewangan
[not found] ` <51516A10.40704-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org>
2013-03-26 16:22 ` Stephen Warren
2013-03-26 16:57 ` Graeme Gregory
2013-03-26 20:23 ` Stephen Warren
2013-03-27 11:03 ` Graeme Gregory
2013-03-26 10:21 ` Felipe Balbi
2013-03-26 10:28 ` Laxman Dewangan
[not found] ` <51517859.2020407-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-03-26 12:07 ` Felipe Balbi
2013-03-26 16:14 ` Stephen Warren
2013-03-26 10:19 ` Felipe Balbi
2013-05-06 13:17 ` [PATCH v4] extcon: Palmas Extcon Driver Kishon Vijay Abraham I
2013-05-06 14:26 ` Laxman Dewangan
2013-05-07 5:06 ` Kishon Vijay Abraham I
2013-05-06 14:40 ` Mark Brown
2013-05-07 5:12 ` Kishon Vijay Abraham I
[not found] ` <51888D55.3090907-l0cyMroinI0@public.gmane.org>
2013-05-07 7:58 ` Mark Brown
2013-05-07 9:47 ` Kishon Vijay Abraham I
2013-05-07 9:49 ` Graeme Gregory
2013-05-07 10:45 ` Mark Brown
2013-05-14 9:18 ` Kishon Vijay Abraham I
2013-05-14 9:54 ` Graeme Gregory
2013-05-14 18:43 ` Laxman Dewangan
2013-05-07 0:43 ` myungjoo.ham
2013-05-07 5:21 ` Kishon Vijay Abraham I
2013-05-22 6:23 ` Kishon Vijay Abraham I [this message]
2013-05-07 6:10 ` Chanwoo Choi
2013-05-07 6:25 ` Kishon Vijay Abraham I
2013-05-07 6:57 ` Chanwoo Choi
2013-05-07 7:05 ` Chanwoo Choi
[not found] ` <5188A7BE.4080509-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2013-05-07 8:17 ` Kishon Vijay Abraham I
2013-03-07 13:21 ` [PATCH v2 4/4] usb: musb: omap2430: replace *_* with *-* in property names Kishon Vijay Abraham I
2013-03-14 13:57 ` Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=519C6459.7000604@ti.com \
--to=kishon@ti.com \
--cc=balbi@ti.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=cw00.choi@samsung.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=gg@slimlogic.co.uk \
--cc=grant.likely@linaro.org \
--cc=ldewangan@nvidia.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
--cc=rob.herring@calxeda.com \
--cc=rob@landley.net \
--cc=ruchika@ti.com \
--cc=sameo@linux.intel.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).