[PATCH v2 0/2] ARM: dts: Add palmas dtsi

[PATCH v2 0/2] ARM: dts: Add palmas dtsi

[J Keerthy]

This patch series adds palmas.dtsi and adds the omap5 specific palmas
entries in the omap5-uevm board file.

This patch series is based on:

git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git
for_3.11/dts

Boot tested on omap5-uevm board.

J Keerthy (2):
  ARM: dts: add dtsi for palmas
  ARM: dts: OMAP5: add palmas node and omap specific palmas regulator
    properties

 arch/arm/boot/dts/omap5-uevm.dts |  147 ++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/palmas.dtsi    |   98 +++++++++++++++++++++++++
 2 files changed, 245 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boot/dts/palmas.dtsi

-- 
1.7.5.4

[PATCH v2 1/2] ARM: dts: add dtsi for palmas

[J Keerthy]

Adds palmas mfd and palmas regulator nodes.

Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk>
Signed-off-by: J Keerthy <j-keerthy@ti.com>
---
 arch/arm/boot/dts/palmas.dtsi |   98 +++++++++++++++++++++++++++++++++++++++++
 1 files changed, 98 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boot/dts/palmas.dtsi

diff --git a/arch/arm/boot/dts/palmas.dtsi b/arch/arm/boot/dts/palmas.dtsi
new file mode 100644
index 0000000..4c5162f
--- /dev/null
+++ b/arch/arm/boot/dts/palmas.dtsi
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&palmas {
+	compatible = "ti,palmas";
+	interrupt-controller;
+	#interrupt-cells = <2>;
+
+	palmas_pmic {
+		compatible = "ti,palmas-pmic";
+		interrupt-parent = <&palmas>;
+		interrupts = <14 IRQ_TYPE_NONE>;
+		interrupt-name = "short-irq";
+
+		ti,ldo6-vibrator;
+
+		regulators {
+			smps123_reg: smps123 {
+				regulator-name = "smps123";
+			};
+
+			smps45_reg: smps45 {
+				regulator-name = "smps45";
+			};
+
+			smps6_reg: smps6 {
+				regulator-name = "smps6";
+			};
+
+			smps7_reg: smps7 {
+				regulator-name = "smps7";
+			};
+
+			smps8_reg: smps8 {
+				regulator-name = "smps8";
+			};
+
+			smps9_reg: smps9 {
+				regulator-name = "smps9";
+			};
+
+			smps10_reg: smps10 {
+				regulator-name = "smps10";
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-name = "ldo1";
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-name = "ldo2";
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-name = "ldo3";
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-name = "ldo4";
+			};
+
+			ldo5_reg: ldo5 {
+				regulator-name = "ldo5";
+			};
+
+			ldo6_reg: ldo6 {
+				regulator-name = "ldo6";
+			};
+
+			ldo7_reg: ldo7 {
+				regulator-name = "ldo7";
+			};
+
+			ldo8_reg: ldo8 {
+				regulator-name = "ldo8";
+			};
+
+			ldo9_reg: ldo9 {
+				regulator-name = "ldo9";
+			};
+
+			ldoln_reg: ldoln {
+				regulator-name = "ldoln";
+			};
+
+			ldousb_reg: ldousb {
+				regulator-name = "ldousb";
+			};
+		};
+	};
+};
-- 
1.7.5.4

Re: [PATCH v2 1/2] ARM: dts: add dtsi for palmas

[Laxman Dewangan]

On Monday 10 June 2013 02:34 PM, J Keerthy wrote:
> Adds palmas mfd and palmas regulator nodes.
>
> Signed-off-by: Graeme Gregory <gg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org>
> Signed-off-by: J Keerthy <j-keerthy-l0cyMroinI0@public.gmane.org>
> ---
>   arch/arm/boot/dts/palmas.dtsi |   98 +++++++++++++++++++++++++++++++++++++++++

Hi Keerthy,
Can you please add documentation for dt binding:
Documentation/devicetree/bindings/mfd

Most of time we refer from this document for dt population.

Thanks,
Laxman

RE: [PATCH v2 1/2] ARM: dts: add dtsi for palmas

[J, KEERTHY]

Hi Laxman,

> -----Original Message-----
> From: Laxman Dewangan [mailto:ldewangan@nvidia.com]
> Sent: Monday, June 10, 2013 2:55 PM
> To: J, KEERTHY
> Cc: Cousson, Benoit; devicetree-discuss@lists.ozlabs.org; linux-
> omap@vger.kernel.org; linux-kernel@vger.kernel.org;
> grant.likely@secretlab.ca; swarren@wwwdotorg.org; Stephen Warren;
> sameo@linux.intel.com; gg@slimlogic.co.uk; lee.jones@linaro.org
> Subject: Re: [PATCH v2 1/2] ARM: dts: add dtsi for palmas
> 
> On Monday 10 June 2013 02:34 PM, J Keerthy wrote:
> > Adds palmas mfd and palmas regulator nodes.
> >
> > Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk>
> > Signed-off-by: J Keerthy <j-keerthy@ti.com>
> > ---
> >   arch/arm/boot/dts/palmas.dtsi |   98
> +++++++++++++++++++++++++++++++++++++++++
> 
> Hi Keerthy,
> Can you please add documentation for dt binding:
> Documentation/devicetree/bindings/mfd
> 

https://lkml.org/lkml/2013/6/6/25

It is based on this.

> Most of time we refer from this document for dt population.
> 
> Thanks,
> Laxman

Re: [PATCH v2 1/2] ARM: dts: add dtsi for palmas

[Stephen Warren]

On 06/10/2013 03:04 AM, J Keerthy wrote:
> Adds palmas mfd and palmas regulator nodes.

Nits:

Well, you're really adding files that provide the nodes, not the nodes
themselves.

Palmas and MFD should be correctly capitalized.

> diff --git a/arch/arm/boot/dts/palmas.dtsi b/arch/arm/boot/dts/palmas.dtsi

> +&palmas {
...
> +	palmas_pmic {
...
> +		ti,ldo6-vibrator;

Isn't that board-specific? I don't know the HW well enough to say, but I
assume that since there's a property, the whole point must be that some
boards want it set and some don't.

> +		regulators {
> +			smps123_reg: smps123 {
> +				regulator-name = "smps123";
> +			};

So the node labels here duplicate those in omap5-uevm.dts in patch 2/2.
While dtc allows this, I don't think there's much point duplicating the
labels. I'd tend to only put the labels in omap5-uevm.dts and not put
them here. That will completely avoid the possibility of the labels in
this file from conflicting with any other labels in any top-level
board.dts file.

I also wonder if this file is actually terribly useful. The only thing
that this file provides is the regulator-name property. It seems simpler
just to put that into each board.dts file. The added advantage of doing
that, is that if a board doesn't use a particular regulator, the node
won't appear, and the regulator won't get registered.

RE: [PATCH v2 1/2] ARM: dts: add dtsi for palmas

[J, KEERTHY]

Hi Stephen,

> -----Original Message-----
> From: Stephen Warren [mailto:swarren@wwwdotorg.org]
> Sent: Monday, June 10, 2013 9:59 PM
> To: J, KEERTHY
> Cc: Cousson, Benoit; devicetree-discuss@lists.ozlabs.org; linux-
> omap@vger.kernel.org; linux-kernel@vger.kernel.org;
> ldewangan@nvidia.com; grant.likely@secretlab.ca; swarren@nvidia.com;
> sameo@linux.intel.com; gg@slimlogic.co.uk; lee.jones@linaro.org
> Subject: Re: [PATCH v2 1/2] ARM: dts: add dtsi for palmas
> 
> On 06/10/2013 03:04 AM, J Keerthy wrote:
> > Adds palmas mfd and palmas regulator nodes.
> 
> Nits:
> 
> Well, you're really adding files that provide the nodes, not the nodes
> themselves.
> 
> Palmas and MFD should be correctly capitalized.

Ok.

> 
> > diff --git a/arch/arm/boot/dts/palmas.dtsi
> > b/arch/arm/boot/dts/palmas.dtsi
> 
> > +&palmas {
> ...
> > +	palmas_pmic {
> ...
> > +		ti,ldo6-vibrator;
> 
> Isn't that board-specific? I don't know the HW well enough to say, but
> I assume that since there's a property, the whole point must be that
> some boards want it set and some don't.
> 

Yes. I will make this part of board file.

> > +		regulators {
> > +			smps123_reg: smps123 {
> > +				regulator-name = "smps123";
> > +			};
> 
> So the node labels here duplicate those in omap5-uevm.dts in patch 2/2.
> While dtc allows this, I don't think there's much point duplicating the
> labels. I'd tend to only put the labels in omap5-uevm.dts and not put
> them here. That will completely avoid the possibility of the labels in
> this file from conflicting with any other labels in any top-level
> board.dts file.
> 
> I also wonder if this file is actually terribly useful. The only thing
> that this file provides is the regulator-name property. It seems
> simpler just to put that into each board.dts file. The added advantage
> of doing that, is that if a board doesn't use a particular regulator,
> the node won't appear, and the regulator won't get registered.

Ok. I will transfer the entire code to omap5-uevm.dts.

Thanks for the review comments.

Regards,
Keerthy

[PATCH v2 2/2] ARM: dts: OMAP5: add palmas node and omap specific palmas regulator properties

[J Keerthy]

Add palmas node and omap specific palmas regulator properties.

Signed-off-by: J Keerthy <j-keerthy@ti.com>
---
 arch/arm/boot/dts/omap5-uevm.dts |  147 ++++++++++++++++++++++++++++++++++++++
 1 files changed, 147 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 927db1e..ffbcc3f 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -8,6 +8,8 @@
 /dts-v1/;
 
 #include "omap5.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	model = "TI OMAP5 uEVM board";
@@ -254,6 +256,151 @@
 	pinctrl-0 = <&i2c1_pins>;
 
 	clock-frequency = <400000>;
+
+	palmas: palmas@48 {
+		reg = <0x48>;
+		/* SPI = 0, IRQ# = 7, active high level-sensitive */
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N */
+		interrupt-parent = <&gic>;
+	};
+
+};
+
+#include "palmas.dtsi"
+
+&palmas {
+	palmas_pmic {
+		ti,ldo6-vibrator;
+
+		regulators {
+			smps123_reg: smps123 {
+				regulator-min-microvolt = < 600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			smps45_reg: smps45 {
+				regulator-min-microvolt = < 600000>;
+				regulator-max-microvolt = <1310000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			smps6_reg: smps6 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			smps7_reg: smps7 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			smps8_reg: smps8 {
+				regulator-min-microvolt = < 600000>;
+				regulator-max-microvolt = <1310000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			smps9_reg: smps9 {
+				regulator-min-microvolt = <2100000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				ti,smps-range = <0x80>;
+			};
+
+			smps10_reg: smps10 {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo5_reg: ldo5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo6_reg: ldo6 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo7_reg: ldo7 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo8_reg: ldo8 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo9_reg: ldo9 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldoln_reg: ldoln {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldousb_reg: ldousb {
+				regulator-min-microvolt = <3250000>;
+				regulator-max-microvolt = <3250000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
 };
 
 &i2c5 {
-- 
1.7.5.4

Re: [PATCH v2 2/2] ARM: dts: OMAP5: add palmas node and omap specific palmas regulator properties

[Lee Jones]

On Mon, 10 Jun 2013, J Keerthy wrote:

> Add palmas node and omap specific palmas regulator properties.
> 
> Signed-off-by: J Keerthy <j-keerthy@ti.com>
> ---
>  arch/arm/boot/dts/omap5-uevm.dts |  147 ++++++++++++++++++++++++++++++++++++++
>  1 files changed, 147 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
> index 927db1e..ffbcc3f 100644
> --- a/arch/arm/boot/dts/omap5-uevm.dts
> +++ b/arch/arm/boot/dts/omap5-uevm.dts
> @@ -8,6 +8,8 @@
>  /dts-v1/;
>  
>  #include "omap5.dtsi"
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>  
>  / {
>  	model = "TI OMAP5 uEVM board";
> @@ -254,6 +256,151 @@
>  	pinctrl-0 = <&i2c1_pins>;
>  
>  	clock-frequency = <400000>;
> +
> +	palmas: palmas@48 {
> +		reg = <0x48>;
> +		/* SPI = 0, IRQ# = 7, active high level-sensitive */

I still think this is superfluous, especially now you're using the
defines which basically say the same thing.

> +		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N */
> +		interrupt-parent = <&gic>;
> +	};
> +
> +};
> +
> +#include "palmas.dtsi"
> +
> +&palmas {
> +	palmas_pmic {
> +		ti,ldo6-vibrator;
> +
> +		regulators {
> +			smps123_reg: smps123 {
> +				regulator-min-microvolt = < 600000>;
> +				regulator-max-microvolt = <1500000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +			};
> +
> +			smps45_reg: smps45 {
> +				regulator-min-microvolt = < 600000>;
> +				regulator-max-microvolt = <1310000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +			};
> +
> +			smps6_reg: smps6 {
> +				regulator-min-microvolt = <1200000>;
> +				regulator-max-microvolt = <1200000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +			};
> +
> +			smps7_reg: smps7 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +			};
> +
> +			smps8_reg: smps8 {
> +				regulator-min-microvolt = < 600000>;
> +				regulator-max-microvolt = <1310000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +			};
> +
> +			smps9_reg: smps9 {
> +				regulator-min-microvolt = <2100000>;
> +				regulator-max-microvolt = <2100000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +				ti,smps-range = <0x80>;
> +			};
> +
> +			smps10_reg: smps10 {
> +				regulator-min-microvolt = <5000000>;
> +				regulator-max-microvolt = <5000000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +			};
> +
> +			ldo1_reg: ldo1 {
> +				regulator-min-microvolt = <2800000>;
> +				regulator-max-microvolt = <2800000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +			};
> +
> +			ldo2_reg: ldo2 {
> +				regulator-min-microvolt = <2900000>;
> +				regulator-max-microvolt = <2900000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +			};
> +
> +			ldo3_reg: ldo3 {
> +				regulator-min-microvolt = <3000000>;
> +				regulator-max-microvolt = <3000000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +			};
> +
> +			ldo4_reg: ldo4 {
> +				regulator-min-microvolt = <2200000>;
> +				regulator-max-microvolt = <2200000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +			};
> +
> +			ldo5_reg: ldo5 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +			};
> +
> +			ldo6_reg: ldo6 {
> +				regulator-min-microvolt = <1500000>;
> +				regulator-max-microvolt = <1500000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +			};
> +
> +			ldo7_reg: ldo7 {
> +				regulator-min-microvolt = <1500000>;
> +				regulator-max-microvolt = <1500000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +			};
> +
> +			ldo8_reg: ldo8 {
> +				regulator-min-microvolt = <1500000>;
> +				regulator-max-microvolt = <1500000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +			};
> +
> +			ldo9_reg: ldo9 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +			};
> +
> +			ldoln_reg: ldoln {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +			};
> +
> +			ldousb_reg: ldousb {
> +				regulator-min-microvolt = <3250000>;
> +				regulator-max-microvolt = <3250000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +			};
> +		};
> +	};
>  };
>  
>  &i2c5 {

-- 
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

RE: [PATCH v2 2/2] ARM: dts: OMAP5: add palmas node and omap specific palmas regulator properties

[J, KEERTHY]

Hello Lee jones,

> -----Original Message-----
> From: Lee Jones [mailto:lee.jones@linaro.org]
> Sent: Monday, June 10, 2013 3:36 PM
> To: J, KEERTHY
> Cc: Cousson, Benoit; devicetree-discuss@lists.ozlabs.org; linux-
> omap@vger.kernel.org; linux-kernel@vger.kernel.org;
> ldewangan@nvidia.com; grant.likely@secretlab.ca; swarren@wwwdotorg.org;
> swarren@nvidia.com; sameo@linux.intel.com; gg@slimlogic.co.uk
> Subject: Re: [PATCH v2 2/2] ARM: dts: OMAP5: add palmas node and omap
> specific palmas regulator properties
> 
> On Mon, 10 Jun 2013, J Keerthy wrote:
> 
> > Add palmas node and omap specific palmas regulator properties.
> >
> > Signed-off-by: J Keerthy <j-keerthy@ti.com>
> > ---
> >  arch/arm/boot/dts/omap5-uevm.dts |  147
> > ++++++++++++++++++++++++++++++++++++++
> >  1 files changed, 147 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/omap5-uevm.dts
> > b/arch/arm/boot/dts/omap5-uevm.dts
> > index 927db1e..ffbcc3f 100644
> > --- a/arch/arm/boot/dts/omap5-uevm.dts
> > +++ b/arch/arm/boot/dts/omap5-uevm.dts
> > @@ -8,6 +8,8 @@
> >  /dts-v1/;
> >
> >  #include "omap5.dtsi"
> > +#include <dt-bindings/interrupt-controller/irq.h>
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> >
> >  / {
> >  	model = "TI OMAP5 uEVM board";
> > @@ -254,6 +256,151 @@
> >  	pinctrl-0 = <&i2c1_pins>;
> >
> >  	clock-frequency = <400000>;
> > +
> > +	palmas: palmas@48 {
> > +		reg = <0x48>;
> > +		/* SPI = 0, IRQ# = 7, active high level-sensitive */
> 
> I still think this is superfluous, especially now you're using the
> defines which basically say the same thing.

I retained the whole comment as it was needed to specify IRQ# as 7
And thought it completely described the below interrupt property.

I can knock it off if it is totally unnecessary.

If there are no further comments. Can I add a Reviewed-by?

> 
> > +		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N
> */
> > +		interrupt-parent = <&gic>;
> > +	};
> > +
> > +};
> > +
> > +#include "palmas.dtsi"
> > +
> > +&palmas {
> > +	palmas_pmic {
> > +		ti,ldo6-vibrator;
> > +
> > +		regulators {
> > +			smps123_reg: smps123 {
> > +				regulator-min-microvolt = < 600000>;
> > +				regulator-max-microvolt = <1500000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +			};
> > +
> > +			smps45_reg: smps45 {
> > +				regulator-min-microvolt = < 600000>;
> > +				regulator-max-microvolt = <1310000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +			};
> > +
> > +			smps6_reg: smps6 {
> > +				regulator-min-microvolt = <1200000>;
> > +				regulator-max-microvolt = <1200000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +			};
> > +
> > +			smps7_reg: smps7 {
> > +				regulator-min-microvolt = <1800000>;
> > +				regulator-max-microvolt = <1800000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +			};
> > +
> > +			smps8_reg: smps8 {
> > +				regulator-min-microvolt = < 600000>;
> > +				regulator-max-microvolt = <1310000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +			};
> > +
> > +			smps9_reg: smps9 {
> > +				regulator-min-microvolt = <2100000>;
> > +				regulator-max-microvolt = <2100000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +				ti,smps-range = <0x80>;
> > +			};
> > +
> > +			smps10_reg: smps10 {
> > +				regulator-min-microvolt = <5000000>;
> > +				regulator-max-microvolt = <5000000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +			};
> > +
> > +			ldo1_reg: ldo1 {
> > +				regulator-min-microvolt = <2800000>;
> > +				regulator-max-microvolt = <2800000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +			};
> > +
> > +			ldo2_reg: ldo2 {
> > +				regulator-min-microvolt = <2900000>;
> > +				regulator-max-microvolt = <2900000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +			};
> > +
> > +			ldo3_reg: ldo3 {
> > +				regulator-min-microvolt = <3000000>;
> > +				regulator-max-microvolt = <3000000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +			};
> > +
> > +			ldo4_reg: ldo4 {
> > +				regulator-min-microvolt = <2200000>;
> > +				regulator-max-microvolt = <2200000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +			};
> > +
> > +			ldo5_reg: ldo5 {
> > +				regulator-min-microvolt = <1800000>;
> > +				regulator-max-microvolt = <1800000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +			};
> > +
> > +			ldo6_reg: ldo6 {
> > +				regulator-min-microvolt = <1500000>;
> > +				regulator-max-microvolt = <1500000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +			};
> > +
> > +			ldo7_reg: ldo7 {
> > +				regulator-min-microvolt = <1500000>;
> > +				regulator-max-microvolt = <1500000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +			};
> > +
> > +			ldo8_reg: ldo8 {
> > +				regulator-min-microvolt = <1500000>;
> > +				regulator-max-microvolt = <1500000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +			};
> > +
> > +			ldo9_reg: ldo9 {
> > +				regulator-min-microvolt = <1800000>;
> > +				regulator-max-microvolt = <3300000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +			};
> > +
> > +			ldoln_reg: ldoln {
> > +				regulator-min-microvolt = <1800000>;
> > +				regulator-max-microvolt = <1800000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +			};
> > +
> > +			ldousb_reg: ldousb {
> > +				regulator-min-microvolt = <3250000>;
> > +				regulator-max-microvolt = <3250000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +			};
> > +		};
> > +	};
> >  };
> >
> >  &i2c5 {
> 
> --
> Lee Jones
> Linaro ST-Ericsson Landing Team Lead
> Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook
> | Twitter | Blog

Regards,
Keerthy