From: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
To: Florian Vaussard <florian.vaussard@epfl.ch>
Cc: Benoit Cousson <b-cousson@ti.com>,
Tony Lindgren <tony@atomide.com>,
linux-omap@vger.kernel.org, devicetree-discuss@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 2/4] ARM: dts: omap3-tobi: Add SMSC911X node
Date: Tue, 11 Jun 2013 17:35:21 +0200 [thread overview]
Message-ID: <51B743B9.3070809@collabora.co.uk> (raw)
In-Reply-To: <1370962189-9689-3-git-send-email-florian.vaussard@epfl.ch>
On 06/11/2013 04:49 PM, Florian Vaussard wrote:
> The Tobi expansion boards embeds a SMSC LAN8700 PHY. Add the
> corresponding node into the DT. The regulators are not designed
> to be turned off.
>
> Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
> ---
> arch/arm/boot/dts/omap3-tobi.dts | 48 ++++++++++++++++++++++++++++++++++++++
> 1 files changed, 48 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap3-tobi.dts b/arch/arm/boot/dts/omap3-tobi.dts
> index c7eebbf..dea726f 100644
> --- a/arch/arm/boot/dts/omap3-tobi.dts
> +++ b/arch/arm/boot/dts/omap3-tobi.dts
> @@ -24,6 +24,54 @@
> linux,default-trigger = "heartbeat";
> };
> };
> +
> + vddvario: regulator-vddvario {
> + compatible = "regulator-fixed";
> + regulator-name = "vddvario";
> + regulator-always-on;
> + };
> +
> + vdd33a: regulator-vdd33a {
> + compatible = "regulator-fixed";
> + regulator-name = "vdd33a";
> + regulator-always-on;
> + };
> +};
> +
> +&gpmc {
> + ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */
> +
> + ethernet@5,0 {
> + compatible = "smsc,lan9221", "smsc,lan9115";
> + reg = <5 0 0xff>;
> + bank-width = <2>;
> +
> + gpmc,mux-add-data;
> + gpmc,cs-on-ns = <0>;
> + gpmc,cs-rd-off-ns = <42>;
> + gpmc,cs-wr-off-ns = <36>;
> + gpmc,adv-on-ns = <6>;
> + gpmc,adv-rd-off-ns = <12>;
> + gpmc,adv-wr-off-ns = <12>;
> + gpmc,oe-on-ns = <0>;
> + gpmc,oe-off-ns = <42>;
> + gpmc,we-on-ns = <0>;
> + gpmc,we-off-ns = <36>;
> + gpmc,rd-cycle-ns = <60>;
> + gpmc,wr-cycle-ns = <54>;
> + gpmc,access-ns = <36>;
> + gpmc,page-burst-access-ns = <0>;
> + gpmc,bus-turnaround-ns = <0>;
> + gpmc,cycle2cycle-delay-ns = <0>;
> + gpmc,wr-data-mux-bus-ns = <18>;
> + gpmc,wr-access-ns = <42>;
> + gpmc,cycle2cycle-samecsen;
> + gpmc,cycle2cycle-diffcsen;
> +
> + interrupt-parent = <&gpio6>;
> + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; /* GPIO 176*/
> + reg-io-width = <4>;
> + };
> };
>
> &i2c3 {
>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
next prev parent reply other threads:[~2013-06-11 15:35 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-11 14:49 [PATCH 0/4] ARM: dts: OMAP3: Updates for Overo Florian Vaussard
2013-06-11 14:49 ` [PATCH 1/4] ARM: dts: OMAP3: Include IRQ header Florian Vaussard
2013-06-11 14:49 ` [PATCH 2/4] ARM: dts: omap3-tobi: Add SMSC911X node Florian Vaussard
2013-06-11 15:35 ` Javier Martinez Canillas [this message]
2013-06-11 14:49 ` [PATCH 3/4] ARM: dts: omap3-tobi: Correct polarity for GPIO LED Florian Vaussard
2013-06-11 14:49 ` [PATCH 4/4] ARM: dts: omap3-overo: Add default trigger for TWL4030 LED Florian Vaussard
2013-06-19 9:29 ` [PATCH 0/4] ARM: dts: OMAP3: Updates for Overo Florian Vaussard
2013-06-19 9:34 ` Benoit Cousson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51B743B9.3070809@collabora.co.uk \
--to=javier.martinez@collabora.co.uk \
--cc=b-cousson@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=florian.vaussard@epfl.ch \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).