From: Chanwoo Choi <cw00.choi@samsung.com>
To: Kishon Vijay Abraham I <kishon@ti.com>
Cc: myungjoo.ham@samsung.com, balbi@ti.com,
devicetree-discuss@lists.ozlabs.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
linux-omap@vger.kernel.org, grant.likely@linaro.org,
rob.herring@calxeda.com, rob@landley.net,
gregkh@linuxfoundation.org, benoit.cousson@linaro.org,
anish198519851985@gmail.com, pmeerw@pmeerw.net
Subject: Re: [PATCH v2] extcon: Add an API to get extcon device from dt node
Date: Fri, 14 Jun 2013 17:51:18 +0900 [thread overview]
Message-ID: <51BAD986.30308@samsung.com> (raw)
In-Reply-To: <51BAD611.1070306@ti.com>
On 06/14/2013 05:36 PM, Kishon Vijay Abraham I wrote:
> Hi,
>
> On Friday 14 June 2013 12:45 PM, Chanwoo Choi wrote:
>> From: Kishon Vijay Abraham I <kishon@ti.com>
>>
>> Added an API of_extcon_get_extcon_dev() to be used by drivers to get
>> extcon device in the case of dt boot (this can be used instead of
>> extcon_get_extcon_dev()).
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
>> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
>> ---
>> Changes since v1:
>> - If edev->name is NULL, dev_name(dev) is used as edev->name.
>> - Change filename from of-extcon.* to of_extcon.*
>> - Fix build error when CONFIG_OF is not set
>> - Add header file(linux/err.h) to of_extcon.c
>>
>> drivers/extcon/Makefile | 2 ++
>> drivers/extcon/extcon-class.c | 3 +-
>> drivers/extcon/of_extcon.c | 64 ++++++++++++++++++++++++++++++++++++++++
>> include/linux/extcon/of_extcon.h | 30 +++++++++++++++++++
>> 4 files changed, 98 insertions(+), 1 deletion(-)
>> create mode 100644 drivers/extcon/of_extcon.c
>> create mode 100644 include/linux/extcon/of_extcon.h
>>
>> diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile
>> index 540e2c3..83468f7 100644
>> --- a/drivers/extcon/Makefile
>> +++ b/drivers/extcon/Makefile
>> @@ -2,6 +2,8 @@
>> # Makefile for external connector class (extcon) devices
>> #
>>
>> +obj-$(CONFIG_OF) += of_extcon.o
>> +
>> obj-$(CONFIG_EXTCON) += extcon-class.o
>> obj-$(CONFIG_EXTCON_GPIO) += extcon-gpio.o
>> obj-$(CONFIG_EXTCON_ADC_JACK) += extcon-adc-jack.o
>> diff --git a/drivers/extcon/extcon-class.c b/drivers/extcon/extcon-class.c
>> index 23f11ea..08509ea 100644
>> --- a/drivers/extcon/extcon-class.c
>> +++ b/drivers/extcon/extcon-class.c
>> @@ -602,7 +602,8 @@ int extcon_dev_register(struct extcon_dev *edev, struct device *dev)
>> edev->dev->class = extcon_class;
>> edev->dev->release = extcon_dev_release;
>>
>> - dev_set_name(edev->dev, edev->name ? edev->name : dev_name(dev));
>> + edev->name = edev->name ? edev->name : dev_name(dev);
>> + dev_set_name(edev->dev, edev->name);
>>
>> if (edev->max_supported) {
>> char buf[10];
>> diff --git a/drivers/extcon/of_extcon.c b/drivers/extcon/of_extcon.c
>> new file mode 100644
>> index 0000000..72173ec
>> --- /dev/null
>> +++ b/drivers/extcon/of_extcon.c
>> @@ -0,0 +1,64 @@
>> +/*
>> + * OF helpers for External connector (extcon) framework
>> + *
>> + * Copyright (C) 2013 Texas Instruments, Inc.
>> + * Kishon Vijay Abraham I <kishon@ti.com>
>> + *
>> + * Copyright (C) 2013 Samsung Electronics
>> + * Chanwoo Choi <cw00.choi@samsung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/slab.h>
>> +#include <linux/err.h>
>> +#include <linux/extcon.h>
>> +#include <linux/of.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/extcon/of_extcon.h>
>> +
>> +/*
>> + * of_extcon_get_extcon_dev - Get the name of extcon device from devicetree
>> + * @dev - instance to the given device
>> + * @index - index into list of extcon_dev
>> + *
>> + * return the instance of extcon device
>> + */
>> +struct extcon_dev *of_extcon_get_extcon_dev(struct device *dev, int index)
>> +{
>> + struct device_node *node;
>> + struct extcon_dev *edev;
>> + struct platform_device *extcon_parent_dev;
>> +
>> + if (!dev->of_node) {
>> + dev_dbg(dev, "device does not have a device node entry\n");
>> + return ERR_PTR(-EINVAL);
>> + }
>> +
>> + node = of_parse_phandle(dev->of_node, "extcon", index);
>> + if (!node) {
>> + dev_dbg(dev, "failed to get phandle in %s node\n",
>> + dev->of_node->full_name);
>> + return ERR_PTR(-ENODEV);
>> + }
>> +
>> + extcon_parent_dev = of_find_device_by_node(node);
>> + if (!extcon_parent_dev) {
>> + dev_dbg(dev, "unable to find device by node\n");
>> + return ERR_PTR(-EPROBE_DEFER);
>> + }
>> +
>> + edev = extcon_get_extcon_dev(dev_name(&extcon_parent_dev->dev));
>> + if (!edev) {
>> + dev_dbg(dev, "unable to get extcon device : %s\n",
>> + dev_name(&extcon_parent_dev->dev));
>> + return ERR_PTR(-ENODEV);
>> + }
>> +
>> + return edev;
>> +}
>> +EXPORT_SYMBOL_GPL(of_extcon_get_extcon_dev);
>> diff --git a/include/linux/extcon/of_extcon.h b/include/linux/extcon/of_extcon.h
>> new file mode 100644
>> index 0000000..462f071
>> --- /dev/null
>> +++ b/include/linux/extcon/of_extcon.h
>> @@ -0,0 +1,30 @@
>> +/*
>> + * OF helpers for External connector (extcon) framework
>> + *
>> + * Copyright (C) 2013 Texas Instruments, Inc.
>> + * Kishon Vijay Abraham I <kishon@ti.com>
>> + *
>> + * Copyright (C) 2013 Samsung Electronics
>> + * Chanwoo Choi <cw00.choi@samsung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + */
>> +
>> +#ifndef __LINUX_OF_EXTCON_H
>> +#define __LINUX_OF_EXTCON_H
>> +
>> +#if defined(CONFIG_OF) && defined(CONFIG_EXTCON)
>> +extern struct extcon_dev
>> + *of_extcon_get_extcon_dev(struct device *dev, int index);
>> +#else
>> +static inline struct extcon_dev
>> + *of_extcon_get_extcon_dev(struct device *dev, int index)
>> +{
>> + return NULL;
>
> Can we have some error value returned here instead of NULL?
> ERR_PTR(-ENOSYS)?
>
OK, I modified it.
You can check modified patch on below git repo:
http://git.kernel.org/cgit/linux/kernel/git/chanwoo/extcon.git/commit/?h=extcon-next&id=2ae384a41c25d6ff8f12091c426fc7324141096f
Thanks,
Chanwoo Choi
next prev parent reply other threads:[~2013-06-14 8:51 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-03 16:13 [PATCH 0/5] dwc3: omap: adapt dwc3 to use extcon framework Kishon Vijay Abraham I
2013-06-03 16:13 ` [PATCH 3/5] extcon: add EXPORT_SYMBOL_GPL for exported functions Kishon Vijay Abraham I
[not found] ` <1370276020-17446-1-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
2013-06-03 16:13 ` [PATCH 1/5] extcon: Add an API to get extcon device from dt node Kishon Vijay Abraham I
2013-06-12 1:28 ` Chanwoo Choi
[not found] ` <1370276020-17446-2-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
2013-06-12 1:39 ` [PATCH] " Chanwoo Choi
2013-06-12 5:16 ` anish singh
2013-06-12 6:55 ` Kishon Vijay Abraham I
2013-06-14 5:08 ` Chanwoo Choi
2013-06-14 7:15 ` [PATCH v2] " Chanwoo Choi
[not found] ` <1371194146-17260-1-git-send-email-cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2013-06-14 8:36 ` Kishon Vijay Abraham I
2013-06-14 8:51 ` Chanwoo Choi [this message]
2013-06-19 5:26 ` [PATCH v3] " Chanwoo Choi
2013-06-03 16:13 ` [PATCH 2/5] extcon: Kconfig: Make extcon config type as bool Kishon Vijay Abraham I
2013-06-03 16:13 ` [PATCH 4/5] usb: dwc3: omap: improve error handling of dwc3_omap_probe Kishon Vijay Abraham I
2013-06-03 16:13 ` [v3 PATCH 5/5] usb: dwc3: use extcon fwrk to receive connect/disconnect Kishon Vijay Abraham I
2013-06-14 13:10 ` [PATCH v4] " Kishon Vijay Abraham I
2013-06-17 4:09 ` Chanwoo Choi
[not found] ` <51BE8C0D.9060003-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2013-06-20 8:54 ` Kishon Vijay Abraham I
2013-06-21 11:58 ` [PATCH v5] " Kishon Vijay Abraham I
[not found] ` <1371815921-28303-1-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
2013-06-24 11:12 ` Chanwoo Choi
2013-06-04 14:23 ` [PATCH 0/5] dwc3: omap: adapt dwc3 to use extcon framework Ruchika Kharwar
2013-06-05 4:49 ` Kishon Vijay Abraham I
2013-06-12 0:54 ` Chanwoo Choi
[not found] ` <51B7C6E0.3000603-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2013-06-12 0:58 ` Chanwoo Choi
2013-06-12 0:59 ` Chanwoo Choi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51BAD986.30308@samsung.com \
--to=cw00.choi@samsung.com \
--cc=anish198519851985@gmail.com \
--cc=balbi@ti.com \
--cc=benoit.cousson@linaro.org \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=kishon@ti.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
--cc=pmeerw@pmeerw.net \
--cc=rob.herring@calxeda.com \
--cc=rob@landley.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).