From mboxrd@z Thu Jan  1 00:00:00 1970
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
Subject: Re: [PATCH v3 12/13] ARM: dts: Add S5K5BA sensor regulator definitions
 for Trats board
Date: Mon, 08 Jul 2013 16:12:56 +0200
Message-ID: <51DAC8E8.2070405@samsung.com>
References: <1372692155-17653-1-git-send-email-s.nawrocki@samsung.com>
 <1372692155-17653-13-git-send-email-s.nawrocki@samsung.com>
 <11736061.3CXfgF4Q9h@flatron>
Mime-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Return-path: <linux-samsung-soc-owner@vger.kernel.org>
In-reply-to: <11736061.3CXfgF4Q9h@flatron>
Sender: linux-samsung-soc-owner@vger.kernel.org
To: Tomasz Figa <tomasz.figa@gmail.com>
Cc: kgene.kim@samsung.com, t.figa@samsung.com, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, myungjoo.ham@samsung.com, m.szyprowski@samsung.com, phil.carmody@partner.samsung.com, j.anaszewski@samsung.com, kyungmin.park@samsung.com, devicetree-discuss@lists.ozlabs.org, Andrzej Hajda <a.hajda@samsung.com>
List-Id: devicetree@vger.kernel.org

Hi,

On 07/06/2013 01:26 AM, Tomasz Figa wrote:
> On Monday 01 of July 2013 17:22:34 Sylwester Nawrocki wrote:
>> From: Andrzej Hajda <a.hajda@samsung.com>
>>
>> Add MAX8998 LDO12 and fixed voltage regulator nodes. While at it,
>> all fixed voltage regulator nodes are grouped in a 'regulators' node.
>>
>> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
>> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
>> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
>> ---
>>  arch/arm/boot/dts/exynos4210-trats.dts |   80
>> +++++++++++++++++++++++++------- 1 file changed, 64 insertions(+), 16
>> deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/exynos4210-trats.dts
>> b/arch/arm/boot/dts/exynos4210-trats.dts index 6b1568e..f62e299 100644
>> --- a/arch/arm/boot/dts/exynos4210-trats.dts
>> +++ b/arch/arm/boot/dts/exynos4210-trats.dts
>> @@ -30,13 +30,64 @@
>>  		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 
> rootwait
>> earlyprintk panic=5"; };
>>
>> -	vemmc_reg: voltage-regulator@0 {
>> -	        compatible = "regulator-fixed";
>> -		regulator-name = "VMEM_VDD_2.8V";
>> -		regulator-min-microvolt = <2800000>;
>> -		regulator-max-microvolt = <2800000>;
>> -		gpio = <&gpk0 2 0>;
>> -		enable-active-high;
>> +	regulators {
>> +		compatible = "simple-bus";
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
> 
> I don't think any addressing is needed for these regulators, so I'd 
> suggest removing those #properties and replacing @N with -N suffix.

Originally there were also 'reg' properties in the individual regulator
nodes, but these were unused and I've removed them before posting. Just
missed to get rid of #size/address-cells as well. Please note you
similarly use such properties in patch [1].

I suppose it is correct to have something like:

regulators {
	compatible = "simple-bus";
	regulator-0 {
		...
	};

	regulator-1 {
		...
	};
	...
};

rather than:

regulators {
	compatible = "simple-bus";
	#address-cells = <1>;
	#size-cells = <0>;

	regulator@0 {
		reg = <...>;
		...
	};

	regulator@1 {
		reg = <...>;
		...
	};
};

Both patterns seem to be used in existing *.dts files.

I'm going to use the first option in the next iteration, unless
someone suggest otherwise.

[1] http://www.spinics.net/lists/arm-kernel/msg253184.html

> Otherwise looks good.
> 
> Best regards,
> Tomasz
> 
>> +
>> +		vemmc_reg: regulator@0 {
>> +			compatible = "regulator-fixed";
>> +			regulator-name = "VMEM_VDD_2.8V";
>> +			regulator-min-microvolt = <2800000>;
>> +			regulator-max-microvolt = <2800000>;
>> +			gpio = <&gpk0 2 0>;
>> +			enable-active-high;
>> +		};
>> +
>> +		tsp_reg: regulator@1 {
>> +			compatible = "regulator-fixed";
>> +			regulator-name = "TSP_FIXED_VOLTAGES";
>> +			regulator-min-microvolt = <2800000>;
>> +			regulator-max-microvolt = <2800000>;
>> +			gpio = <&gpl0 3 0>;
>> +			enable-active-high;
>> +		};
>> +
>> +		cam_af_28v_reg: regulator@2 {
>> +			compatible = "regulator-fixed";
>> +			regulator-name = "8M_AF_2.8V_EN";
>> +			regulator-min-microvolt = <2800000>;
>> +			regulator-max-microvolt = <2800000>;
>> +			gpio = <&gpk1 1 0>;
>> +			enable-active-high;
>> +		};
>> +
>> +		cam_io_en_reg: regulator@3 {
>> +			compatible = "regulator-fixed";
>> +			regulator-name = "CAM_IO_EN";
>> +			regulator-min-microvolt = <2800000>;
>> +			regulator-max-microvolt = <2800000>;
>> +			gpio = <&gpe2 1 0>;
>> +			enable-active-high;
>> +		};
>> +
>> +		cam_io_12v_reg: regulator@4 {
>> +			compatible = "regulator-fixed";
>> +			regulator-name = "8M_1.2V_EN";
>> +			regulator-min-microvolt = <1200000>;
>> +			regulator-max-microvolt = <1200000>;
>> +			gpio = <&gpe2 5 0>;
>> +			enable-active-high;
>> +		};
>> +
>> +		vt_core_15v_reg: regulator@5 {
>> +			compatible = "regulator-fixed";
>> +			regulator-name = "VT_CORE_1.5V";
>> +			regulator-min-microvolt = <1500000>;
>> +			regulator-max-microvolt = <1500000>;
>> +			gpio = <&gpe2 2 0>;
>> +			enable-active-high;
>> +		};
>>  	};

Thanks,
Sylwester