From: Nishanth Menon <nm@ti.com>
To: Tero Kristo <t-kristo@ti.com>
Cc: linux-omap@vger.kernel.org, paul@pwsan.com, khilman@linaro.org,
tony@atomide.com, mturquette@linaro.org, rnayak@ti.com,
linux-arm-kernel@lists.infradead.org,
devicetree-discuss@lists.ozlabs.org
Subject: Re: [PATCHv4 02/33] clk: omap: introduce clock driver
Date: Tue, 30 Jul 2013 10:21:49 -0500 [thread overview]
Message-ID: <51F7DA0D.7060709@ti.com> (raw)
In-Reply-To: <1374564028-11352-3-git-send-email-t-kristo@ti.com>
On 07/23/2013 02:19 AM, Tero Kristo wrote:
> Parses OMAP clock data from DT and registers those clocks with the clock
> framework. dt_omap_clk_init must be called early during boot for timer
> initialization so it is exported and called from the existing clock code
> instead of probing like a real driver. Based on initial work done by
> Mike Turquette.
>
> Signed-off-by: Tero Kristo <t-kristo@ti.com>
> Cc: Mike Turquette <mturquette@linaro.org>
> ---
> drivers/clk/Makefile | 1 +
> drivers/clk/omap/Makefile | 1 +
> drivers/clk/omap/clk.c | 39 +++++++++++++++++++++++++++++++++++++++
Minor suggestion - should we just start drivers/clk/ti/ instead of clk/omap?
AM335x/DRA7 are not "strictly OMAP".. might also allow for some reuse
for other TI platforms..
> include/linux/clk/omap.h | 24 ++++++++++++++++++++++++
> 4 files changed, 65 insertions(+)
> create mode 100644 drivers/clk/omap/Makefile
> create mode 100644 drivers/clk/omap/clk.c
> create mode 100644 include/linux/clk/omap.h
>
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index 4038c2b..d3c3733 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -32,6 +32,7 @@ obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o
> obj-$(CONFIG_ARCH_ZYNQ) += zynq/
> obj-$(CONFIG_ARCH_TEGRA) += tegra/
> obj-$(CONFIG_PLAT_SAMSUNG) += samsung/
> +obj-$(CONFIG_ARCH_OMAP) += omap/
>
> obj-$(CONFIG_X86) += x86/
>
> diff --git a/drivers/clk/omap/Makefile b/drivers/clk/omap/Makefile
> new file mode 100644
> index 0000000..8195931
> --- /dev/null
> +++ b/drivers/clk/omap/Makefile
> @@ -0,0 +1 @@
> +obj-y += clk.o
> diff --git a/drivers/clk/omap/clk.c b/drivers/clk/omap/clk.c
> new file mode 100644
> index 0000000..4bf1929
> --- /dev/null
> +++ b/drivers/clk/omap/clk.c
> @@ -0,0 +1,39 @@
> +/*
> + * OMAP PRCM clock driver
maybe then prcm-clk.c ?
> + *
> + * Copyright (C) 2013 Texas Instruments, Inc.
> + * Tero Kristo <t-kristo@ti.com>
> + * Mike Turquette <mturquette@linaro.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether express or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/clk/omap.h>
> +#include <linux/kernel.h>
> +#include <linux/of_device.h>
> +
> +/* FIXME - should the OMAP PRCM clock driver match generic types? */
should it? :)
> +static const struct of_device_id clk_match[] = {
> + {.compatible = "fixed-clock", .data = of_fixed_clk_setup, },
drivers/clk/clk-fixed-rate.c seems to already do this with
CLK_OF_DECLARE, or am I mistaken? and so on?
> + {.compatible = "mux-clock", .data = of_mux_clk_setup, },
> + {.compatible = "fixed-factor-clock",
> + .data = of_fixed_factor_clk_setup, },
> + {.compatible = "divider-clock", .data = of_divider_clk_setup, },
> + {.compatible = "gate-clock", .data = of_gate_clk_setup, },
> + {},
> +};
> +
> +/* FIXME - need to initialize early; skip real driver registration & probe */
> +int __init dt_omap_clk_init(void)
Might be good to have kernel doc to explain the init requirement as
documented in commit message.
> +{
> + of_clk_init(clk_match);
just doing of_clk_init(NULL); should do the job, no? that could even be
a static inline OR introduced in board_generic without additional headers?
> + return 0;
> +}
> diff --git a/include/linux/clk/omap.h b/include/linux/clk/omap.h
> new file mode 100644
> index 0000000..647f02f
> --- /dev/null
> +++ b/include/linux/clk/omap.h
> @@ -0,0 +1,24 @@
> +/*
> + * Copyright (C) 2013 Texas Instruments, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
would you like to match licensing to that of the C file?
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + */
> +
> +#ifndef __LINUX_CLK_OMAP_H_
> +#define __LINUX_CLK_OMAP_H_
> +
> +int __init dt_omap_clk_init(void);
> +
> +#endif
>
--
Regards,
Nishanth Menon
next prev parent reply other threads:[~2013-07-30 15:21 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-23 7:19 [PATCHv4 00/33] ARM: OMAP: clock conversion to DT Tero Kristo
2013-07-23 7:19 ` [PATCHv4 01/33] CLK: clkdev: add support for looking up clocks from DT Tero Kristo
2013-07-30 15:04 ` Nishanth Menon
2013-07-31 8:43 ` Tero Kristo
2013-07-23 7:19 ` [PATCHv4 02/33] clk: omap: introduce clock driver Tero Kristo
2013-07-30 15:21 ` Nishanth Menon [this message]
2013-07-31 8:59 ` Tero Kristo
2013-08-01 13:44 ` Nishanth Menon
2013-08-01 14:59 ` Tero Kristo
2013-07-23 7:19 ` [PATCHv4 03/33] CLK: OMAP4: Add DPLL clock support Tero Kristo
2013-07-30 16:23 ` Nishanth Menon
2013-07-31 9:46 ` Tero Kristo
2013-08-01 14:00 ` Nishanth Menon
2013-08-01 15:08 ` Tero Kristo
2013-08-01 15:13 ` Nishanth Menon
2013-08-01 8:29 ` Rajendra Nayak
2013-07-23 7:19 ` [PATCHv4 04/33] CLK: omap: move part of the machine specific clock header contents to driver Tero Kristo
2013-07-30 18:22 ` Nishanth Menon
2013-07-31 9:59 ` Tero Kristo
2013-07-23 7:20 ` [PATCHv4 05/33] CLK: omap: add DT duplicate clock registration mechanism Tero Kristo
2013-07-30 18:40 ` Nishanth Menon
2013-07-31 10:07 ` Tero Kristo
2013-08-01 14:25 ` Nishanth Menon
2013-08-01 15:18 ` Tero Kristo
2013-08-01 15:24 ` Nishanth Menon
2013-08-01 15:30 ` Tero Kristo
2013-08-02 7:22 ` Tony Lindgren
2013-07-23 7:20 ` [PATCHv4 06/33] CLK: omap: add autoidle support Tero Kristo
2013-07-30 18:56 ` Nishanth Menon
2013-07-31 10:13 ` Tero Kristo
2013-07-23 7:20 ` [PATCHv4 07/33] CLK: omap: add support for OMAP gate clock Tero Kristo
2013-07-30 19:17 ` Nishanth Menon
2013-07-31 14:45 ` Tero Kristo
2013-07-23 7:20 ` [PATCHv4 08/33] ARM: dts: omap4 clock data Tero Kristo
2013-07-30 19:27 ` Nishanth Menon
2013-07-31 14:49 ` Tero Kristo
2013-07-23 7:20 ` [PATCHv4 09/33] CLK: omap: add omap4 clock init file Tero Kristo
2013-07-30 19:33 ` Nishanth Menon
2013-07-31 14:52 ` Tero Kristo
2013-07-23 7:20 ` [PATCHv4 10/33] ARM: OMAP4: remove old clock data and link in new clock init code Tero Kristo
2013-07-30 19:42 ` Nishanth Menon
2013-07-31 14:55 ` Tero Kristo
2013-07-23 7:20 ` [PATCHv4 11/33] ARM: dts: omap5 clock data Tero Kristo
2013-07-23 7:20 ` [PATCHv4 12/33] CLK: omap: add omap5 clock init file Tero Kristo
2013-07-23 7:20 ` [PATCHv4 13/33] ARM: dts: dra7 clock data Tero Kristo
2013-07-23 7:20 ` [PATCHv4 14/33] CLK: omap: add dra7 clock init file Tero Kristo
2013-07-23 7:20 ` [PATCHv4 15/33] CLK: OMAP: DPLL: add support for DT property ti,dpll-no-gate Tero Kristo
2013-07-30 19:18 ` Nishanth Menon
2013-07-31 14:56 ` Tero Kristo
2013-07-23 7:20 ` [PATCHv4 16/33] CLK: OMAP: DPLL: do not of_iomap NULL autoidle register Tero Kristo
2013-07-30 19:49 ` Nishanth Menon
2013-07-31 14:57 ` Tero Kristo
2013-07-23 7:20 ` [PATCHv4 17/33] CLK: DT: add support for set-rate-parent flag Tero Kristo
2013-07-30 19:58 ` Nishanth Menon
2013-07-23 7:20 ` [PATCHv4 18/33] ARM: dts: am33xx clock data Tero Kristo
2013-07-23 7:20 ` [PATCHv4 19/33] CLK: omap: add am33xx clock init file Tero Kristo
2013-07-30 20:00 ` Nishanth Menon
2013-07-31 14:59 ` Tero Kristo
2013-07-23 7:20 ` [PATCHv4 20/33] ARM: AM33xx: remove old clock data and link in new clock init code Tero Kristo
2013-07-23 7:20 ` [PATCHv4 21/33] CLK: OMAP: DPLL: add omap3 dpll support Tero Kristo
2013-07-30 20:08 ` Nishanth Menon
2013-07-31 15:03 ` Tero Kristo
2013-07-23 7:20 ` [PATCHv4 22/33] CLK: OMAP: update gate clock setup for OMAP3 Tero Kristo
2013-07-30 20:13 ` Nishanth Menon
2013-07-31 15:05 ` Tero Kristo
2013-07-23 7:20 ` [PATCHv4 23/33] CLK: OMAP: add interface clock support " Tero Kristo
2013-07-30 20:23 ` Nishanth Menon
2013-07-31 15:09 ` Tero Kristo
2013-08-01 14:50 ` Nishanth Menon
2013-07-23 7:20 ` [PATCHv4 24/33] CLK: OMAP: move some defines from machine to driver header Tero Kristo
2013-07-23 7:20 ` [PATCHv4 25/33] ARM: OMAP: hwmod: fix an incorrect clk type cast with _get_clkdm Tero Kristo
2013-07-23 7:20 ` [PATCHv4 26/33] CLK: omap: gate: add support for OMAP36xx dpllx_mx_ck:s Tero Kristo
2013-07-23 7:20 ` [PATCHv4 27/33] ARM: OMAP3: hwmod: initialize clkdm from clkdm_name Tero Kristo
2013-07-23 7:20 ` [PATCHv4 28/33] ARM: dts: omap3 clock data Tero Kristo
2013-07-23 7:20 ` [PATCHv4 30/33] clk: OMAP: DRA7: Add APLL support Tero Kristo
2013-07-23 7:20 ` [PATCHv4 31/33] ARM: dts: clk: Add apll related clocks Tero Kristo
2013-07-23 7:20 ` [PATCHv4 32/33] clk: OMAP: DRA7: Change apll_pcie_m2_ck to fixed factor clock Tero Kristo
2013-07-23 7:20 ` [PATCHv4 33/33] clk: DTS: DRA7: Add PCIe related clock nodes Tero Kristo
2013-07-24 14:16 ` [PATCHv4 00/33] ARM: OMAP: clock conversion to DT Roger Quadros
[not found] ` <1374564028-11352-30-git-send-email-t-kristo@ti.com>
2013-07-30 20:19 ` [PATCHv4 29/33] CLK: omap: add omap3 clock init file Nishanth Menon
2013-07-31 6:35 ` Tony Lindgren
2013-07-31 15:10 ` Tero Kristo
2013-08-02 7:24 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51F7DA0D.7060709@ti.com \
--to=nm@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=khilman@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=paul@pwsan.com \
--cc=rnayak@ti.com \
--cc=t-kristo@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).