From: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
To: Arun Kumar K <arun.kk@samsung.com>
Cc: linux-media@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
devicetree@vger.kernel.org, s.nawrocki@samsung.com,
hverkuil@xs4all.nl, a.hajda@samsung.com, sachin.kamat@linaro.org,
shaik.ameer@samsung.com, kilyeon.im@samsung.com,
arunkk.samsung@gmail.com
Subject: Re: [RFC v3 06/13] [media] exynos5-fimc-is: Add isp subdev
Date: Sat, 03 Aug 2013 23:48:07 +0200 [thread overview]
Message-ID: <51FD7A97.6030907@gmail.com> (raw)
In-Reply-To: <1375455762-22071-7-git-send-email-arun.kk@samsung.com>
On 08/02/2013 05:02 PM, Arun Kumar K wrote:
> fimc-is driver takes video data input from the ISP video node
> which is added in this patch. This node accepts Bayer input
> buffers which is given from the IS sensors.
>
> Signed-off-by: Arun Kumar K<arun.kk@samsung.com>
> Signed-off-by: Kilyeon Im<kilyeon.im@samsung.com>
> ---
> drivers/media/platform/exynos5-is/fimc-is-isp.c | 509 +++++++++++++++++++++++
> drivers/media/platform/exynos5-is/fimc-is-isp.h | 93 +++++
> 2 files changed, 602 insertions(+)
> create mode 100644 drivers/media/platform/exynos5-is/fimc-is-isp.c
> create mode 100644 drivers/media/platform/exynos5-is/fimc-is-isp.h
>
> diff --git a/drivers/media/platform/exynos5-is/fimc-is-isp.c b/drivers/media/platform/exynos5-is/fimc-is-isp.c
> new file mode 100644
> index 0000000..e97e473
> --- /dev/null
> +++ b/drivers/media/platform/exynos5-is/fimc-is-isp.c
> @@ -0,0 +1,509 @@
> +/*
> + * Samsung EXYNOS5250 FIMC-IS (Imaging Subsystem) driver
> + *
> + * Copyright (C) 2013 Samsung Electronics Co., Ltd.
> + * Arun Kumar K<arun.kk@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include<media/v4l2-ioctl.h>
> +#include<media/videobuf2-dma-contig.h>
> +
> +#include "fimc-is.h"
> +
> +#define ISP_DRV_NAME "fimc-is-isp"
> +
> +static const struct fimc_is_fmt formats[] = {
> + {
> + .name = "Bayer GR-BG 8bits",
> + .fourcc = V4L2_PIX_FMT_SGRBG8,
> + .depth = { 8 },
> + .num_planes = 1,
> + },
> + {
> + .name = "Bayer GR-BG 10bits",
> + .fourcc = V4L2_PIX_FMT_SGRBG10,
> + .depth = { 16 },
> + .num_planes = 1,
> + },
> + {
> + .name = "Bayer GR-BG 12bits",
> + .fourcc = V4L2_PIX_FMT_SGRBG12,
> + .depth = { 16 },
> + .num_planes = 1,
> + },
> +};
> +#define NUM_FORMATS ARRAY_SIZE(formats)
> +
> +static const struct fimc_is_fmt *find_format(struct v4l2_format *f)
> +{
> + unsigned int i;
> +
> + for (i = 0; i< NUM_FORMATS; i++) {
> + if (formats[i].fourcc == f->fmt.pix_mp.pixelformat)
> + return&formats[i];
> + }
CodingStyle: braces are not needed.
> + return NULL;
> +}
> +
> +static int isp_video_output_start_streaming(struct vb2_queue *vq,
> + unsigned int count)
> +{
> + struct fimc_is_isp *isp = vb2_get_drv_priv(vq);
> +
> + set_bit(STATE_RUNNING,&isp->output_state);
> + return 0;
> +}
> +
> +static int isp_video_output_stop_streaming(struct vb2_queue *vq)
> +{
> + struct fimc_is_isp *isp = vb2_get_drv_priv(vq);
> +
> + clear_bit(STATE_RUNNING,&isp->output_state);
> + return 0;
> +}
> +
> +static int isp_video_output_queue_setup(struct vb2_queue *vq,
> + const struct v4l2_format *pfmt,
> + unsigned int *num_buffers, unsigned int *num_planes,
> + unsigned int sizes[], void *allocators[])
> +{
> + struct fimc_is_isp *isp = vb2_get_drv_priv(vq);
> + const struct fimc_is_fmt *fmt = isp->fmt;
> + unsigned int wh, i;
> +
> + if (!fmt)
> + return -EINVAL;
> +
> + *num_planes = fmt->num_planes;
> + wh = isp->width * isp->height;
> +
> + for (i = 0; i< *num_planes; i++) {
> + allocators[i] = isp->alloc_ctx;
> + sizes[i] = (wh * fmt->depth[i]) / 8;
> + }
> + return 0;
> +}
> +
> +static int isp_video_output_buffer_init(struct vb2_buffer *vb)
> +{
> + struct vb2_queue *vq = vb->vb2_queue;
> + struct fimc_is_isp *isp = vb2_get_drv_priv(vq);
> + struct fimc_is_buf *buf;
> +
> + buf =&isp->output_bufs[vb->v4l2_buf.index];
> + /* Initialize buffer */
> + buf->vb = vb;
> + buf->paddr[0] = vb2_dma_contig_plane_dma_addr(vb, 0);
> + isp->out_buf_cnt++;
> + return 0;
> +}
> +
> +static void isp_video_output_buffer_queue(struct vb2_buffer *vb)
> +{
> + struct vb2_queue *vq = vb->vb2_queue;
> + struct fimc_is_isp *isp = vb2_get_drv_priv(vq);
> + struct fimc_is_buf *buf;
> +
> + buf =&isp->output_bufs[vb->v4l2_buf.index];
> +
> + fimc_is_pipeline_buf_lock(isp->pipeline);
> + fimc_is_isp_wait_queue_add(isp, buf);
> + fimc_is_pipeline_buf_unlock(isp->pipeline);
> +
> + /* Call shot command */
> + fimc_is_pipeline_shot(isp->pipeline);
> +}
> +
> +static const struct vb2_ops isp_video_output_qops = {
> + .queue_setup = isp_video_output_queue_setup,
> + .buf_init = isp_video_output_buffer_init,
> + .buf_queue = isp_video_output_buffer_queue,
> + .wait_prepare = vb2_ops_wait_prepare,
> + .wait_finish = vb2_ops_wait_finish,
> + .start_streaming = isp_video_output_start_streaming,
> + .stop_streaming = isp_video_output_stop_streaming,
> +};
> +
> +static const struct v4l2_file_operations isp_video_output_fops = {
> + .owner = THIS_MODULE,
> + .open = v4l2_fh_open,
> + .release = vb2_fop_release,
> + .poll = vb2_fop_poll,
> + .unlocked_ioctl = video_ioctl2,
> + .mmap = vb2_fop_mmap,
> +};
> +
> +/*
> + * Video node ioctl operations
> + */
> +static int isp_querycap_output(struct file *file, void *priv,
> + struct v4l2_capability *cap)
> +{
> + strncpy(cap->driver, ISP_DRV_NAME, sizeof(cap->driver) - 1);
> + strncpy(cap->card, ISP_DRV_NAME, sizeof(cap->card) - 1);
> + snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s",
> + ISP_DRV_NAME);
> + cap->device_caps = V4L2_CAP_STREAMING;
> + cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
> + return 0;
> +}
> +
> +static int isp_enum_fmt_mplane(struct file *file, void *priv,
> + struct v4l2_fmtdesc *f)
> +{
> + const struct fimc_is_fmt *fmt;
> +
> + if (f->index>= NUM_FORMATS)
> + return -EINVAL;
> +
> + fmt =&formats[f->index];
> + strlcpy(f->description, fmt->name, sizeof(f->description));
> + f->pixelformat = fmt->fourcc;
> +
> + return 0;
> +}
> +
> +static int isp_g_fmt_mplane(struct file *file, void *fh,
> + struct v4l2_format *f)
> +{
> + struct fimc_is_isp *isp = video_drvdata(file);
> + struct v4l2_pix_format_mplane *pixm =&f->fmt.pix_mp;
> + struct v4l2_plane_pix_format *plane_fmt =&pixm->plane_fmt[0];
> + const struct fimc_is_fmt *fmt = isp->fmt;
> +
> + plane_fmt->bytesperline = (isp->width * fmt->depth[0]) / 8;
> + plane_fmt->sizeimage = plane_fmt->bytesperline * isp->height;
> + memset(plane_fmt->reserved, 0, sizeof(plane_fmt->reserved));
> +
> + pixm->num_planes = fmt->num_planes;
> + pixm->pixelformat = fmt->fourcc;
> + pixm->width = isp->width;
> + pixm->height = isp->height;
> + pixm->field = V4L2_FIELD_NONE;
> + pixm->colorspace = V4L2_COLORSPACE_JPEG;
> + memset(pixm->reserved, 0, sizeof(pixm->reserved));
> +
> + return 0;
> +}
> +
> +static int isp_try_fmt_mplane(struct file *file, void *fh,
> + struct v4l2_format *f)
> +{
> + const struct fimc_is_fmt *fmt;
> + struct v4l2_pix_format_mplane *pixm =&f->fmt.pix_mp;
> + struct v4l2_plane_pix_format *plane_fmt =&pixm->plane_fmt[0];
> +
> + fmt = find_format(f);
> + if (!fmt)
> + fmt = (struct fimc_is_fmt *)&formats[0];
> +
> + v4l_bound_align_image(&pixm->width,
> + ISP_MIN_WIDTH + SENSOR_WIDTH_PADDING,
> + ISP_MAX_WIDTH + SENSOR_WIDTH_PADDING, 0,
> + &pixm->height,
> + ISP_MIN_HEIGHT + SENSOR_HEIGHT_PADDING,
> + ISP_MAX_HEIGHT + SENSOR_HEIGHT_PADDING, 0,
> + 0);
> +
> + plane_fmt->bytesperline = (pixm->width * fmt->depth[0]) / 8;
> + plane_fmt->sizeimage = (pixm->width * pixm->height *
> + fmt->depth[0]) / 8;
> + memset(plane_fmt->reserved, 0, sizeof(plane_fmt->reserved));
> +
> + pixm->num_planes = fmt->num_planes;
> + pixm->pixelformat = fmt->fourcc;
> + pixm->colorspace = V4L2_COLORSPACE_JPEG;
> + pixm->field = V4L2_FIELD_NONE;
> + memset(pixm->reserved, 0, sizeof(pixm->reserved));
> +
> + return 0;
> +}
> +
> +static int isp_s_fmt_mplane(struct file *file, void *priv,
> + struct v4l2_format *f)
> +{
> + struct fimc_is_isp *isp = video_drvdata(file);
nit: It would make sense to add:
struct v4l2_pix_format_mplane *pixm =&f->fmt.pix_mp;
And use it below instead of f->fmt.pix_mp.
> + const struct fimc_is_fmt *fmt;
> + int ret;
> +
> + ret = isp_try_fmt_mplane(file, priv, f);
> + if (ret)
> + return ret;
> +
> + /* Get format type */
> + fmt = find_format(f);
> + if (!fmt) {
> + fmt = (struct fimc_is_fmt *)&formats[0];
Casting is not needed.
> + f->fmt.pix_mp.pixelformat = fmt->fourcc;
> + f->fmt.pix_mp.num_planes = fmt->num_planes;
> + }
> +
> + isp->fmt = fmt;
> + isp->width = f->fmt.pix_mp.width;
> + isp->height = f->fmt.pix_mp.height;
> + isp->size_image = f->fmt.pix_mp.plane_fmt[0].sizeimage;
> + set_bit(STATE_INIT,&isp->output_state);
> + return 0;
> +}
> +
> +static int isp_reqbufs(struct file *file, void *priv,
> + struct v4l2_requestbuffers *reqbufs)
> +{
> + struct fimc_is_isp *isp = video_drvdata(file);
> + int ret;
> +
> + reqbufs->count = max_t(u32, FIMC_IS_ISP_REQ_BUFS_MIN, reqbufs->count);
> + ret = vb2_reqbufs(&isp->vbq, reqbufs);
> + if (ret) {
> + pr_err("vb2 req buffers failed\n");
Please use v4l2_err() or dev_err() so we can get some hint which device
emits the logs.
> + return ret;
> + }
I think you should check reqbufs->count here if it didn't get adjusted
by vb2_reqbufs() to a value lower than FIMC_IS_ISP_REQ_BUFS_MIN. And in
such case you would do something like:
reqbufs->count = 0;
vb2_reqbufs(&isp->vbq, reqbufs);
return -EERROR;
> + isp->out_buf_cnt = 0;
> + set_bit(STATE_BUFS_ALLOCATED,&isp->output_state);
> + return 0;
> +}
> +
> +static const struct v4l2_ioctl_ops isp_video_output_ioctl_ops = {
> + .vidioc_querycap = isp_querycap_output,
> + .vidioc_enum_fmt_vid_out_mplane = isp_enum_fmt_mplane,
> + .vidioc_try_fmt_vid_out_mplane = isp_try_fmt_mplane,
> + .vidioc_s_fmt_vid_out_mplane = isp_s_fmt_mplane,
> + .vidioc_g_fmt_vid_out_mplane = isp_g_fmt_mplane,
> + .vidioc_reqbufs = isp_reqbufs,
> + .vidioc_querybuf = vb2_ioctl_querybuf,
> + .vidioc_qbuf = vb2_ioctl_qbuf,
> + .vidioc_dqbuf = vb2_ioctl_dqbuf,
> + .vidioc_streamon = vb2_ioctl_streamon,
> + .vidioc_streamoff = vb2_ioctl_streamoff,
> +};
> +
> +static int isp_subdev_registered(struct v4l2_subdev *sd)
> +{
> + struct fimc_is_isp *isp = v4l2_get_subdevdata(sd);
> + struct vb2_queue *q =&isp->vbq;
> + struct video_device *vfd =&isp->vfd;
> + int ret;
> +
> + mutex_init(&isp->video_lock);
> +
> + memset(vfd, 0, sizeof(*vfd));
> + snprintf(vfd->name, sizeof(vfd->name), "fimc-is-isp.output");
> +
> + vfd->fops =&isp_video_output_fops;
> + vfd->ioctl_ops =&isp_video_output_ioctl_ops;
> + vfd->v4l2_dev = sd->v4l2_dev;
> + vfd->release = video_device_release_empty;
> + vfd->lock =&isp->video_lock;
> + vfd->queue = q;
> + vfd->vfl_dir = VFL_DIR_TX;
> + set_bit(V4L2_FL_USE_FH_PRIO,&vfd->flags);
> +
> + memset(q, 0, sizeof(*q));
> + q->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
> + q->io_modes = VB2_MMAP | VB2_DMABUF;
> + q->timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
> + q->ops =&isp_video_output_qops;
> + q->mem_ops =&vb2_dma_contig_memops;
> + q->drv_priv = isp;
> +
> + ret = vb2_queue_init(q);
> + if (ret< 0)
> + return ret;
> +
> + isp->vd_pad.flags = MEDIA_PAD_FL_SINK;
> + ret = media_entity_init(&vfd->entity, 1,&isp->vd_pad, 0);
> + if (ret< 0)
> + return ret;
> +
> + video_set_drvdata(vfd, isp);
> +
> + ret = video_register_device(vfd, VFL_TYPE_GRABBER, -1);
> + if (ret< 0) {
> + media_entity_cleanup(&vfd->entity);
> + return ret;
> + }
> +
> + v4l2_info(sd->v4l2_dev, "Registered %s as /dev/%s\n",
> + vfd->name, video_device_node_name(vfd));
> + return 0;
> +}
> +
> +static void isp_subdev_unregistered(struct v4l2_subdev *sd)
> +{
> + struct fimc_is_isp *isp = v4l2_get_subdevdata(sd);
> +
> + if (isp&& video_is_registered(&isp->vfd))
> + video_unregister_device(&isp->vfd);
> +}
> +
> +static const struct v4l2_subdev_internal_ops isp_subdev_internal_ops = {
> + .registered = isp_subdev_registered,
> + .unregistered = isp_subdev_unregistered,
> +};
> +
> +static struct fimc_is_sensor *fimc_is_get_sensor(struct fimc_is *is,
> + int sensor_id)
> +{
> + int i;
> +
> + for (i = 0; i< FIMC_IS_NUM_SENSORS; i++) {
> + if (is->sensor[i].drvdata->id == sensor_id)
> + return&is->sensor[i];
> + }
> + return NULL;
> +}
> +
> +static int isp_s_power(struct v4l2_subdev *sd, int on)
> +{
> + struct fimc_is_isp *isp = v4l2_get_subdevdata(sd);
> + struct fimc_is *is = isp->pipeline->is;
> + struct v4l2_subdev *sensor_sd = isp->sensor_sd;
> + struct fimc_is_sensor *sensor;
> + const struct sensor_drv_data *sdata;
> + struct media_pad *pad;
> + struct v4l2_subdev_format fmt;
> + int ret;
> +
> + if (!sensor_sd)
> + return -EINVAL;
> +
> + if (on) {
> + ret = pm_runtime_get_sync(&is->pdev->dev);
> + if (ret< 0)
> + return ret;
> +
> + sdata = exynos5_is_sensor_get_drvdata(sensor_sd->dev->of_node);
> + sensor = fimc_is_get_sensor(is, sdata->id);
> + /* Retrieve the sensor format */
> + pad =&sensor_sd->entity.pads[0];
w00t ?
> + fmt.pad = 0;
> + fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> + ret = v4l2_subdev_call(sensor_sd, pad, get_fmt, NULL,&fmt);
Pad is just a name of the callback pointers data structure:
struct v4l2_subdev {
...
const struct v4l2_subdev_ops *ops;
...
};
struct v4l2_subdev_ops {
const struct v4l2_subdev_core_ops *core;
const struct v4l2_subdev_tuner_ops *tuner;
const struct v4l2_subdev_audio_ops *audio;
const struct v4l2_subdev_video_ops *video;
const struct v4l2_subdev_vbi_ops *vbi;
const struct v4l2_subdev_ir_ops *ir;
const struct v4l2_subdev_sensor_ops *sensor;
const struct v4l2_subdev_pad_ops *pad;
};
#define v4l2_subdev_call(sd, o, f, args...) \
(!(sd) ? -ENODEV : (((sd)->ops->o && (sd)->ops->o->f) ? \
(sd)->ops->o->f((sd) , ##args) : -ENOIOCTLCMD))
> + if (ret)
> + return ret;
> +
> + sensor->width = fmt.format.width - SENSOR_WIDTH_PADDING;
> + sensor->height = fmt.format.height - SENSOR_HEIGHT_PADDING;
> + sensor->pixel_width = fmt.format.width;
> + sensor->pixel_height = fmt.format.height;
Shouldn't this get_fmt call be done in STREAMON handler, after
media_entity_pipeline_start() gets called ? Why do you need it here ?
> + ret = fimc_is_pipeline_open(isp->pipeline, sensor);
> + if (ret)
> + pr_err("Pipeline open failed\n");
> + } else {
> + ret = fimc_is_pipeline_close(isp->pipeline);
> + if (ret)
> + pr_err("Pipeline close failed\n");
> + pm_runtime_put_sync(&is->pdev->dev);
> + }
> +
> + return ret;
> +}
> +
> +static struct v4l2_subdev_core_ops isp_core_ops = {
> + .s_power = isp_s_power,
> +};
> +
> +static int isp_s_stream(struct v4l2_subdev *sd, int enable)
> +{
> + struct fimc_is_isp *isp = v4l2_get_subdevdata(sd);
> + struct fimc_is *is = isp->pipeline->is;
> + struct v4l2_subdev *sensor_sd = isp->sensor_sd;
> + const struct sensor_drv_data *sdata;
> + struct fimc_is_sensor *sensor;
> + int ret;
> +
> + if (!sensor_sd)
> + return -EINVAL;
> +
> + if (enable) {
> + sdata = exynos5_is_sensor_get_drvdata(sensor_sd->dev->of_node);
> + sensor = fimc_is_get_sensor(is, sdata->id);
> + /* Check sensor resolution match */
> + if ((sensor->pixel_width != isp->width) ||
> + (sensor->pixel_height != isp->height)) {
> + pr_err("Resolution mismatch\n");
> + return -EPIPE;
> + }
> + ret = fimc_is_pipeline_start(isp->pipeline);
> + if (ret)
> + pr_err("Pipeline start failed.\n");
Please use v4l2_err(sd, ...);
> + } else {
> + ret = fimc_is_pipeline_stop(isp->pipeline);
> + if (ret)
> + pr_err("Pipeline stop failed.\n");
Ditto.
> + }
> +
> + return ret;
> +}
> +
> +static const struct v4l2_subdev_video_ops isp_video_ops = {
> + .s_stream = isp_s_stream,
> +};
> +
> +static struct v4l2_subdev_ops isp_subdev_ops = {
> + .core =&isp_core_ops,
> + .video =&isp_video_ops,
> +};
> +
> +int fimc_is_isp_subdev_create(struct fimc_is_isp *isp,
> + struct vb2_alloc_ctx *alloc_ctx,
> + struct fimc_is_pipeline *pipeline)
> +{
> + struct v4l2_ctrl_handler *handler =&isp->ctrl_handler;
> + struct v4l2_subdev *sd =&isp->subdev;
> + int ret;
> +
> + /* Init context vars */
This comment don't seem to be really helpful.
> + isp->alloc_ctx = alloc_ctx;
> + isp->pipeline = pipeline;
> + isp->fmt =&formats[1];
> + INIT_LIST_HEAD(&isp->wait_queue);
> + INIT_LIST_HEAD(&isp->run_queue);
> + isp->width = ISP_DEF_WIDTH;
> + isp->height = ISP_DEF_HEIGHT;
> +
> + v4l2_subdev_init(sd,&isp_subdev_ops);
> + sd->owner = THIS_MODULE;
> + sd->flags = V4L2_SUBDEV_FL_HAS_DEVNODE;
> + snprintf(sd->name, sizeof(sd->name), ISP_DRV_NAME);
> +
> + isp->subdev_pads[ISP_SD_PAD_SINK_DMA].flags = MEDIA_PAD_FL_SINK;
> + isp->subdev_pads[ISP_SD_PAD_SINK_OTF].flags = MEDIA_PAD_FL_SINK;
> + isp->subdev_pads[ISP_SD_PAD_SRC].flags = MEDIA_PAD_FL_SOURCE;
> + ret = media_entity_init(&sd->entity, ISP_SD_PADS_NUM,
> + isp->subdev_pads, 0);
> + if (ret< 0)
> + return ret;
> +
> + ret = v4l2_ctrl_handler_init(handler, 1);
> + if (handler->error)
> + goto err_ctrl;
> +
> + sd->ctrl_handler = handler;
> + sd->internal_ops =&isp_subdev_internal_ops;
> + v4l2_set_subdevdata(sd, isp);
> +
> + return 0;
> +
> +err_ctrl:
> + media_entity_cleanup(&sd->entity);
> + v4l2_ctrl_handler_free(handler);
> + return ret;
> +}
--
Regards,
Sylwester
next prev parent reply other threads:[~2013-08-03 21:48 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-02 15:02 [RFC v3 00/13] Exynos5 IS driver Arun Kumar K
2013-08-02 15:02 ` [RFC v3 01/13] [media] exynos5-is: Adding media device driver for exynos5 Arun Kumar K
2013-08-03 21:41 ` Sylwester Nawrocki
2013-08-05 10:06 ` Arun Kumar K
2013-08-05 10:47 ` Sylwester Nawrocki
2013-08-05 5:21 ` Sachin Kamat
2013-08-05 10:07 ` Arun Kumar K
2013-08-02 15:02 ` [RFC v3 02/13] [media] exynos5-fimc-is: Add Exynos5 FIMC-IS device tree bindings documentation Arun Kumar K
2013-08-03 21:41 ` Sylwester Nawrocki
2013-08-05 16:53 ` Stephen Warren
2013-08-05 22:37 ` Sylwester Nawrocki
2013-08-08 20:34 ` Stephen Warren
2013-08-13 21:14 ` Sylwester Nawrocki
2013-08-02 15:02 ` [RFC v3 03/13] [media] exynos5-fimc-is: Add driver core files Arun Kumar K
2013-08-03 21:42 ` Sylwester Nawrocki
2013-08-05 14:22 ` Arun Kumar K
2013-08-02 15:02 ` [RFC v3 04/13] [media] exynos5-fimc-is: Add common driver header files Arun Kumar K
2013-08-03 21:43 ` Sylwester Nawrocki
2013-08-06 4:47 ` Arun Kumar K
2013-08-02 15:02 ` [RFC v3 05/13] [media] exynos5-fimc-is: Add register definition and context header Arun Kumar K
2013-08-03 21:45 ` Sylwester Nawrocki
2013-08-02 15:02 ` [RFC v3 06/13] [media] exynos5-fimc-is: Add isp subdev Arun Kumar K
2013-08-03 21:48 ` Sylwester Nawrocki [this message]
2013-08-02 15:02 ` [RFC v3 07/13] [media] exynos5-fimc-is: Add scaler subdev Arun Kumar K
2013-08-03 21:46 ` Sylwester Nawrocki
2013-08-02 15:02 ` [RFC v3 08/13] [media] exynos5-fimc-is: Add sensor interface Arun Kumar K
2013-08-03 21:48 ` Sylwester Nawrocki
2013-08-02 15:02 ` [RFC v3 09/13] [media] exynos5-fimc-is: Add the hardware pipeline control Arun Kumar K
2013-08-04 15:00 ` Sylwester Nawrocki
2013-08-06 13:49 ` Arun Kumar K
2013-08-07 5:52 ` Sachin Kamat
2013-08-02 15:02 ` [RFC v3 10/13] [media] exynos5-fimc-is: Add the hardware interface module Arun Kumar K
2013-08-04 15:03 ` Sylwester Nawrocki
2013-08-07 5:16 ` Arun Kumar K
2013-08-02 15:02 ` [RFC v3 11/13] [media] exynos5-is: Add Kconfig and Makefile Arun Kumar K
2013-08-03 22:05 ` Sylwester Nawrocki
2013-08-02 15:02 ` [RFC v3 12/13] V4L: s5k6a3: Change sensor min/max resolutions Arun Kumar K
2013-08-03 21:51 ` Sylwester Nawrocki
2013-08-02 15:02 ` [RFC v3 13/13] V4L: Add driver for s5k4e5 image sensor Arun Kumar K
2013-08-03 21:49 ` Sylwester Nawrocki
2013-08-03 21:40 ` [RFC v3 00/13] Exynos5 IS driver Sylwester Nawrocki
2013-08-05 5:10 ` Arun Kumar K
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51FD7A97.6030907@gmail.com \
--to=sylvester.nawrocki@gmail.com \
--cc=a.hajda@samsung.com \
--cc=arun.kk@samsung.com \
--cc=arunkk.samsung@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=hverkuil@xs4all.nl \
--cc=kilyeon.im@samsung.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=s.nawrocki@samsung.com \
--cc=sachin.kamat@linaro.org \
--cc=shaik.ameer@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).