Re: [PATCH v5 1/2] ARM: davinci: da850: add DT node for ethernet

[Sekhar Nori <nsekhar-l0cyMroinI0@public.gmane.org>]

On 8/16/2013 7:41 PM, Lad, Prabhakar wrote:
> From: "Lad, Prabhakar" <prabhakar.csengg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> 
> Add ethernet device tree node information and pinmux for mii to da850 by
> providing interrupt details and local mac address.
> 
> Signed-off-by: Lad, Prabhakar <prabhakar.csengg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---
>  arch/arm/boot/dts/da850-evm.dts |    5 +++++
>  arch/arm/boot/dts/da850.dtsi    |   30 ++++++++++++++++++++++++++++++
>  2 files changed, 35 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
> index 1f8cfdd..44f3fbc 100644
> --- a/arch/arm/boot/dts/da850-evm.dts
> +++ b/arch/arm/boot/dts/da850-evm.dts
> @@ -96,6 +96,11 @@
>  			pinctrl-0 = <&mdio_pins>;
>  			bus_freq = <2200000>;
>  		};
> +		ethernet: emac@1e20000 {

You misunderstood what Sergei said. This should be:

	eth0: ethernet@1e20000 {

Thanks,
Sekhar