From mboxrd@z Thu Jan 1 00:00:00 1970 From: Benoit Cousson Subject: Re: [PATCH] ARM: dts: add AM33XX EDMA support Date: Mon, 26 Aug 2013 10:33:33 +0200 Message-ID: <521B12DD.8010505@baylibre.com> References: <1377284808-32412-1-git-send-email-bigeasy@linutronix.de> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1377284808-32412-1-git-send-email-bigeasy@linutronix.de> Sender: linux-omap-owner@vger.kernel.org To: Sebastian Andrzej Siewior Cc: tony@atomide.com, Joel Fernandes , santosh.shilimkar@ti.com, linux-omap@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Matt Porter , Matt Porter , Joel A Fernandes List-Id: devicetree@vger.kernel.org Hi Sebastian, Is this patch different from that one: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg92176.html Lokesh just pointed me this patch because it was missing for the SHAM/AES series from Mark Greer. Bottom-line, I've just applied the original one along with a second one that was adding EDMA in SPI. Regards, Benoit On 23/08/2013 21:06, Sebastian Andrzej Siewior wrote: > From: Matt Porter > > Adds AM33XX EDMA support to the am33xx.dtsi as documented in > Documentation/devicetree/bindings/dma/ti-edma.txt > > Joel: Drop DT entries that are non-hardware-description for now as discussed in [1] > > [1] https://patchwork.kernel.org/patch/2226761/ > > Signed-off-by: Matt Porter > Signed-off-by: Joel A Fernandes > Signed-off-by: Sebastian Andrzej Siewior > --- > Could someone please pick this up? > > arch/arm/boot/dts/am33xx.dtsi | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi > index 38b446b..784f774 100644 > --- a/arch/arm/boot/dts/am33xx.dtsi > +++ b/arch/arm/boot/dts/am33xx.dtsi > @@ -96,6 +96,18 @@ > reg = <0x48200000 0x1000>; > }; > > + edma: edma@49000000 { > + compatible = "ti,edma3"; > + ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; > + reg = <0x49000000 0x10000>, > + <0x44e10f90 0x10>; > + interrupts = <12 13 14>; > + #dma-cells = <1>; > + dma-channels = <64>; > + ti,edma-regions = <4>; > + ti,edma-slots = <256>; > + }; > + > gpio0: gpio@44e07000 { > compatible = "ti,omap4-gpio"; > ti,hwmods = "gpio1"; >