From: Sergei Shtylyov <sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
To: George Cherian <george.cherian-l0cyMroinI0@public.gmane.org>
Cc: balbi-l0cyMroinI0@public.gmane.org,
myungjoo.ham-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org,
cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org,
linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
rob-VoJi6FS/r0vR7s880joybQ@public.gmane.org,
ian.campbell-Sxgqhf6Nn4DQT0dZR+AlfA@public.gmane.org,
swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org,
davidb-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org,
swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org,
popcornmix-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Subject: Re: [PATCH v2 3/3] ARM: dts: dra7-evm: Add extcon nodes for USB ID pin detection
Date: Wed, 28 Aug 2013 18:40:38 +0400 [thread overview]
Message-ID: <521E0BE6.3080607@cogentembedded.com> (raw)
In-Reply-To: <1377698352-27689-4-git-send-email-george.cherian-l0cyMroinI0@public.gmane.org>
Hello.
On 08/28/2013 05:59 PM, George Cherian wrote:
> Add
> -extcon nodes for USB ID pin detection.
> -i2c nodes.
> -pcf nodes to which USB ID pin is connected.
> Signed-off-by: George Cherian <george.cherian-l0cyMroinI0@public.gmane.org>
> ---
> arch/arm/boot/dts/dra7-evm.dts | 52 +++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 51 insertions(+), 1 deletion(-)
> diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
> index acd3c09..9ee97c0 100644
> --- a/arch/arm/boot/dts/dra7-evm.dts
> +++ b/arch/arm/boot/dts/dra7-evm.dts
> @@ -17,6 +17,17 @@
> device_type = "memory";
> reg = <0x80000000 0x60000000>; /* 1536 MB */
> };
> +
> + extcon1: gpio_usbvid_extcon1 {
> + compatible = "ti,gpio-usb-id";
> + gpios = <&pcf_21 1 0>;
> + };
> +
> + extcon2: gpio_usbvid_extcon2 {
> + compatible = "ti,gpio-usb-id";
> + gpios = <&pcf_21 2 0>;
> + };
> +
> };
>
> &dra7_pmx_core {
> @@ -33,10 +44,49 @@
> };
> };
>
> +&i2c1 {
> + clock-frequency = <400000>;
> +
> + pcf_20: pcf8575@20 {
Acorrding to the ePAPR spec [1], "the name of a node should be somewhat
generic, reflecting the function of the device and not its precise
programming model. If appropriate, the name should be one of the following
choices:
[...]
- gpio
[...]"
> + compatible = "ti,pcf8575";
> + reg = <0x20>;
> + n_latch = <0x4000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-parent = <&gpio6>;
> + interrupts = <11 2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + pcf_21: pcf8575@21 {
Same comment here.
> + compatible = "ti,pcf8575";
> + reg = <0x21>;
> + n_latch = <0x1408>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-parent = <&pcf_20>;
> + interrupts = <14 2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> +};
> +
[1] http://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.0.pdf
WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-08-28 14:40 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-28 13:59 [PATCH v2 0/3] Add Generic USB VBUS/ID detection via GPIO using extcon George Cherian
2013-08-28 13:59 ` [PATCH v2 1/3] extcon: extcon-gpio-usbvid: Generic USB VBUS/ID detection via GPIO George Cherian
2013-08-28 13:59 ` [PATCH v2 2/3] drivers: Makefile: Extcon is a framework so bump it up George Cherian
2013-08-28 13:59 ` [PATCH v2 3/3] ARM: dts: dra7-evm: Add extcon nodes for USB ID pin detection George Cherian
[not found] ` <1377698352-27689-4-git-send-email-george.cherian-l0cyMroinI0@public.gmane.org>
2013-08-28 14:40 ` Sergei Shtylyov [this message]
2013-08-28 17:35 ` [PATCH v2 0/3] Add Generic USB VBUS/ID detection via GPIO using extcon George Cherian
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=521E0BE6.3080607@cogentembedded.com \
--to=sergei.shtylyov-m4dtvfq/zs1mrggop+s0pdbpr1lh4cv8@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=balbi-l0cyMroinI0@public.gmane.org \
--cc=bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=davidb-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=george.cherian-l0cyMroinI0@public.gmane.org \
--cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=ian.campbell-Sxgqhf6Nn4DQT0dZR+AlfA@public.gmane.org \
--cc=linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=myungjoo.ham-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=popcornmix-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=rob-VoJi6FS/r0vR7s880joybQ@public.gmane.org \
--cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
--cc=swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).