Re: [PATCH 1/2] ARM: Dove: Add the audio devices in DT

[Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>]

Hello.

On 29-08-2013 13:38, Jean-Francois Moine wrote:

>>> diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
>>> index 499abad..78227e2 100644
>>> --- a/arch/arm/boot/dts/dove.dtsi
>>> +++ b/arch/arm/boot/dts/dove.dtsi
>>> @@ -573,6 +573,24 @@
>>>    					phy-handle = <&ethphy>;
>>>    				};
>>>    			};
>>> +
>>> +			i2s0: audio-controller@b0000 {

>>       According to ePAPR [1] the node should be called "sound", not
>> "audio-controller".

>>> +				compatible = "marvell,mvebu-audio";
>>> +				reg = <0xb0000 0x2210>;
>>> +				interrupts = <19>, <20>;
>>> +				clocks = <&gate_clk 12>;
>>> +				clock-names = "internal";
>>> +				status = "disabled";
>>> +			};

> AFAIK, "sound" describes the global audio subsystem. For the Cubox,
> this will be done by something like:

> 	sound {
> 		compatible = "simple-audio";
> 		audio-controller = <&i2s1>;
> 		audio-codec = <&spdif>;
> 		codec-dai-name = "dit-hifi";
> 	};

    Well, then "sound-controller" sounds somewhat more appropriate.

WBR, Sergei