From mboxrd@z Thu Jan 1 00:00:00 1970 From: Suman Anna Subject: Re: [PATCH 1/2] hwspinlock/omap: add support for dt nodes Date: Wed, 4 Sep 2013 11:30:22 -0500 Message-ID: <5227601E.7070007@ti.com> References: <1378230767-54931-1-git-send-email-s-anna@ti.com> <5226EAD5.8070400@mm-sol.com> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <5226EAD5.8070400@mm-sol.com> Sender: linux-kernel-owner@vger.kernel.org To: Stanimir Varbanov Cc: Ohad Ben-Cohen , Tony Lindgren , Benoit Cousson , Kumar Gala , linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, devicetree@vger.kernel.org List-Id: devicetree@vger.kernel.org On 09/04/2013 03:09 AM, Stanimir Varbanov wrote: > Hi Suman, > > Thanks for the patch. > > On 09/03/2013 08:52 PM, Suman Anna wrote: >> HwSpinlock IP is present only on OMAP4 and other newer SoCs, >> which are all device-tree boot only. This patch adds the >> base support for parsing the DT nodes, and removes the code >> dealing with the traditional platform device instantiation. >> >> Signed-off-by: Suman Anna >> --- >> .../devicetree/bindings/hwlock/omap-hwspinlock.txt | 28 ++++++++++ >> arch/arm/mach-omap2/Makefile | 3 -- >> arch/arm/mach-omap2/hwspinlock.c | 60 ---------------------- >> drivers/hwspinlock/omap_hwspinlock.c | 21 ++++++-- >> 4 files changed, 45 insertions(+), 67 deletions(-) >> create mode 100644 Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt >> delete mode 100644 arch/arm/mach-omap2/hwspinlock.c >> >> diff --git a/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt b/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt >> new file mode 100644 >> index 0000000..adfb8ad >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt >> @@ -0,0 +1,28 @@ >> +OMAP4+ HwSpinlock Driver >> + >> +Required properties: >> +- compatible: Currently supports only "ti,omap4-hwspinlock" for >> + OMAP44xx, OMAP54xx, AM33xx, AM43xx, DRA7xx SoCs >> +- reg: Contains the hwspinlock register address range (base >> + address and length) >> +- ti,hwmods: Name of the hwmod associated with the hwspinlock device >> + >> +Optional properties: >> +- base_id: Base Id for the locks for a particular hwspinlock > > Could you rename base_id to base-id. The property name convention is to > use dashes in DT world. Yep, will change to use dashes. Thanks Suman