devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Keerthy <a0393675@ti.com>
To: Nishanth Menon <nm@ti.com>
Cc: devicetree@vger.kernel.org, balajitk@ti.com, pawel.moll@arm.com,
	Keerthy <j-keerthy@ti.com>,
	linux-kernel@vger.kernel.org, rob.herring@calxeda.com,
	bcousson@baylibre.com, linux-omap@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] ARM: DTS: DRA7: Add TPS659038 PMIC nodes
Date: Wed, 11 Sep 2013 11:00:10 +0530	[thread overview]
Message-ID: <522FFFE2.2000705@ti.com> (raw)
In-Reply-To: <522E1FB2.10809@ti.com>

On Tuesday 10 September 2013 12:51 AM, Nishanth Menon wrote:
> On 08/26/2013 12:36 AM, Keerthy wrote:
>> The Patch adds nodes for TPS659038 PMIC for DRA7 boards.
>>
>> It is based on top of:
>> http://comments.gmane.org/gmane.linux.ports.arm.omap/102459.
>>
>> Documentation:	Documentation/devicetree/bindings/mfd/palmas.txt
>> 		Documentation/devicetree/bindings/regulator/palmas-pmic.txt		
>>
>> Boot Tested on DRA7 d1 Board.
>>
>> Signed-off-by: Keerthy <j-keerthy@ti.com>
>> ---
>>   arch/arm/boot/dts/dra7-evm.dts |  118 ++++++++++++++++++++++++++++++++++++++++
>>   1 file changed, 118 insertions(+)
>>
>> Index: linux/arch/arm/boot/dts/dra7-evm.dts
>> ===================================================================
>> --- linux.orig/arch/arm/boot/dts/dra7-evm.dts	2013-08-26 09:57:52.496173554 +0530
>> +++ linux/arch/arm/boot/dts/dra7-evm.dts	2013-08-26 10:38:44.995414695 +0530
>> @@ -93,6 +93,119 @@
>>   	pinctrl-names = "default";
>>   	pinctrl-0 = <&i2c1_pins>;
>>   	clock-frequency = <400000>;
>> +
>> +	tps659038: tps659038@58 {
>> +		compatible = "ti,tps659038";
>> +		reg = <0x58>;
>> +
>> +		tps659038_pmic {
>> +			compatible = "ti,tps659038-pmic";
>> +
>> +			regulators {
>> +				smps123_reg: smps123 {
>> +					/* VDD_MPU */
>> +						regulator-name = "smps123";
>> +						regulator-min-microvolt = < 850000>;
>> +						regulator-max-microvolt = <1250000>;
>> +						regulator-always-on;
>> +						regulator-boot-on;
>> +					};
>> +
>> +				smps45_reg: smps45 {
>> +						/* VDD_DSPEVE */
>> +						regulator-name = "smps45";
>> +						regulator-min-microvolt = < 850000>;
>> +						regulator-max-microvolt = <1150000>;
>> +						regulator-boot-on;
>> +					};
>> +
>> +				smps6_reg: smps6 {
>> +						/* VDD_GPU - over VDD_SMPS6 */
>> +						regulator-name = "smps6";
>> +						regulator-min-microvolt = <850000>;
>> +						regulator-max-microvolt = <12500000>;
>> +						regulator-boot-on;
>> +					};
>> +
>> +				smps7_reg: smps7 {
>> +						/* CORE_VDD */
>> +						regulator-name = "smps7";
>> +						regulator-min-microvolt = <850000>;
>> +						regulator-max-microvolt = <1030000>;
>> +						regulator-always-on;
>> +						regulator-boot-on;
>> +					};
>> +
>> +				smps8_reg: smps8 {
>> +						/* VDD_IVAHD */
>> +						regulator-name = "smps8";
>> +						regulator-min-microvolt = < 850000>;
>> +						regulator-max-microvolt = <1250000>;
>> +						regulator-boot-on;
>> +					};
>> +
>> +				smps9_reg: smps9 {
>> +						/* VDDS1V8 */
>> +						regulator-name = "smps9";
>> +						regulator-min-microvolt = <1800000>;
>> +						regulator-max-microvolt = <1800000>;
>> +						regulator-always-on;
>> +						regulator-boot-on;
>> +					};
>> +
>> +				ldo1_reg: ldo1 {
>> +						/* LDO1_OUT --> SDIO  */
>> +						regulator-name = "ldo1";
>> +						regulator-min-microvolt = <1800000>;
>> +						regulator-max-microvolt = <3300000>;
>> +						regulator-boot-on;
>> +					};
>> +
>> +				ldo2_reg: ldo2 {
>> +						/* VDD_RTCIO */
>> +						/* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */
>> +						regulator-name = "ldo2";
>> +						regulator-min-microvolt = <3300000>;
>> +						regulator-max-microvolt = <3300000>;
>> +						regulator-boot-on;
>> +					};
>> +
>> +				ldo3_reg: ldo3 {
>> +						/* VDDA_1V8_PHY */
>> +						regulator-name = "ldo3";
>> +						regulator-min-microvolt = <1800000>;
>> +						regulator-max-microvolt = <1800000>;
>> +						regulator-boot-on;
>> +					};
>> +
>> +				ldo9_reg: ldo9 {
>> +						/* VDD_RTC */
>> +						regulator-name = "ldo9";
>> +						regulator-min-microvolt = <1050000>;
>> +						regulator-max-microvolt = <1050000>;
>> +						regulator-boot-on;
>> +					};
>> +
>> +				ldoln_reg: ldoln {
>> +						/* VDDA_1V8_PLL */
>> +						regulator-name = "ldoln";
>> +						regulator-min-microvolt = <1800000>;
>> +						regulator-max-microvolt = <1800000>;
>> +						regulator-always-on;
>> +						regulator-boot-on;
>> +					};
>> +
>> +				ldousb_reg: ldousb {
>> +						/* VDDA_3V_USB: VDDA_USBHS33 */
>> +						regulator-name = "ldousb";
>> +						regulator-min-microvolt = <3300000>;
>> +						regulator-max-microvolt = <3300000>;
>> +						regulator-boot-on;
>> +					};
>> +
>> +				};
>> +			};
>> +		};
>>   };
>>   
>>   &i2c2 {
>>
> Acked-by: Nishanth Menon <nm@ti.com>
>
Thanks Nishanth.

Benoit,

Could you pull this patch?

Regards,
Keerthy

  reply	other threads:[~2013-09-11  5:30 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-26  5:36 [PATCH] ARM: DTS: DRA7: Add TPS659038 PMIC nodes Keerthy
2013-09-03  6:33 ` Keerthy
2013-09-09 19:21 ` Nishanth Menon
2013-09-11  5:30   ` Keerthy [this message]
2013-10-03 13:39     ` Benoit Cousson
     [not found]       ` <524D7397.2000200-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
2013-10-04  8:25         ` Keerthy
  -- strict thread matches above, loose matches on Subject: below --
2013-08-13  5:42 Keerthy
2013-08-14 23:35 ` Nishanth Menon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=522FFFE2.2000705@ti.com \
    --to=a0393675@ti.com \
    --cc=balajitk@ti.com \
    --cc=bcousson@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=j-keerthy@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=pawel.moll@arm.com \
    --cc=rob.herring@calxeda.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).