From mboxrd@z Thu Jan 1 00:00:00 1970 From: Nishanth Menon Subject: Re: [PATCH 4/4] ARM: dts: am335x-bone-common: add cpu0 and mmc1 triggers Date: Thu, 12 Sep 2013 11:20:00 -0500 Message-ID: <5231E9B0.8060303@ti.com> References: <1379000532-27376-1-git-send-email-koen@dominion.thruhere.net> <1379000532-27376-5-git-send-email-koen@dominion.thruhere.net> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1379000532-27376-5-git-send-email-koen@dominion.thruhere.net> Sender: linux-omap-owner@vger.kernel.org To: Koen Kooi Cc: linux-kernel@vger.kernel.org, bcousson@baylibre.com, tony@atomide.com, rob.herring@calxeda.com, pawel.moll@arm.com, mark.rutland@arm.com, swarren@wwwdotorg.org, ijc+devicetree@hellion.org.uk, linux@arm.linux.org.uk, linux-omap@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org On 09/12/2013 10:42 AM, Koen Kooi wrote: > This matches the vendor 3.8.x configuration that is shipping with the boards. > > The LED layout is now: > > USR0: heartbeat > USR1: mmc0 (micro-SD slot) > USR2: cpu0 > USR3: mmc1 (eMMC) > > The cpu0 triggers was put inbetween the mmc triggers to make is easier to see nitpick: sinbetween/in between/ > where the disk activity is. > > Signed-off-by: Koen Kooi > --- > arch/arm/boot/dts/am335x-bone-common.dtsi | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi > index 80407ff..3057f30 100644 > --- a/arch/arm/boot/dts/am335x-bone-common.dtsi > +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi > @@ -203,12 +203,14 @@ > led@4 { > label = "beaglebone:green:usr2"; > gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "cpu0"; > default-state = "off"; > }; > > led@5 { > label = "beaglebone:green:usr3"; > gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "mmc1"; > default-state = "off"; > }; > }; > -- Regards, Nishanth Menon