From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jonathan Cameron Subject: Re: [PATCH 12/38] Documentation: dt: iio: Add binding for L3G4200D Date: Sat, 14 Sep 2013 13:09:18 +0100 Message-ID: <523451EE.7080307@kernel.org> References: <1378817379-8238-1-git-send-email-lee.jones@linaro.org> <1378817379-8238-13-git-send-email-lee.jones@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1378817379-8238-13-git-send-email-lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Sender: linux-iio-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Lee Jones Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, "devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" , arnd-r2nGTMty4D4@public.gmane.org, linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, denis.ciocca-qxv4g6HH51o@public.gmane.org, linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org Add devicetree list cc On 09/10/13 13:49, Lee Jones wrote: > L3G4200D is a Gyroscope Sensor > > Signed-off-by: Lee Jones > --- > .../devicetree/bindings/iio/gyro/l3g4200d.txt | 21 +++++++++++++++++++++ > 1 file changed, 21 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/gyro/l3g4200d.txt > > diff --git a/Documentation/devicetree/bindings/iio/gyro/l3g4200d.txt b/Documentation/devicetree/bindings/iio/gyro/l3g4200d.txt > new file mode 100644 > index 0000000..29baf9d > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/gyro/l3g4200d.txt > @@ -0,0 +1,21 @@ > +* STMicroelectronics Gyroscope Sensor > + > +Required properties: > + - compatible: Should be "st,l3g4200d_gyro" > + - reg: The I2C address of the sensor > + > +Optional properties: > + - vdd-supply: Phandle to the Vdd supply regulator > + - vddio-supply: Phandle to the Vdd-IO supply regulator > + > +Example: > + > +i2c@80128000 { > + l3g4200d_gyro@68 { > + compatible = "st,l3g4200d_gyro"; > + reg = <0x68>; > + > + vdd-supply = <&ab8500_ldo_aux1_reg>; > + vddio-supply = <&db8500_vsmps2_reg>; > + }; > +}; >