Re: [PATCH 0/3 v2] clk: keystone: Add common clock drivers

[Santosh Shilimkar <santosh.shilimkar-l0cyMroinI0@public.gmane.org>]

On Wednesday 25 September 2013 01:50 PM, Mike Turquette wrote:
> On Wed, Sep 25, 2013 at 9:13 AM, Santosh Shilimkar
> <santosh.shilimkar-l0cyMroinI0@public.gmane.org> wrote:
>> Mike,
>>
>> On Thursday 29 August 2013 03:14 PM, Santosh Shilimkar wrote:
>>> v2:
>>> - Aligned the bindings as per the list discussion. Removed the additional
>>>       parameters by usage of reg-names and additional compatible fields.
>>> - Addressed all the comments from v1 on drivers.
>>> - Split the series into clock drivers($subject series) and
>>>       platform, dt updates. Will post that one separately.
>>>
>>> Special thanks to Mike and Mark for the detailed review on v1.
>>>
>>> Series is an attempt to add the clock drivers for Keystone SOCs
>>> based on common clock framework. A PLL drivers taking care of
>>> SOC PLLs and a gate control driver taking clock management for
>>> the IPs. The current Keystone based SOCs don' support dynamic power
>>> management usecases like DVFS, SOC ilde etc and hence most of the
>>> usage is limited to enabling clocks and finding the current clock
>>> rate etc.
>>>
>>> Based on to of Mike's dt binding series [1] and tested on Keystone2
>>> EVM.
>>>
>>> Cc: Mike Turquette <mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>>
>> As aligned off-list, I will revise the series to remove the
>> dependency with your DT bindings series which still seems to
>> be under discussion.
> 
> ACK. I plan to refresh my DT bindings and make them more concise, but
> I still think it is wise if you do not rely on them. As we discussed
> you can switch over to those bindings at any point in the future if
> you wish.
> 
Sounds good.

Regards,
Santosh

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html