From: Eduardo Valentin <eduardo.valentin@ti.com>
To: Nishanth Menon <nm@ti.com>
Cc: "Mark Rutland" <mark.rutland@arm.com>,
"dt list" <devicetree@vger.kernel.org>,
wni@nvidia.com, durgadoss.r@intel.com,
"Ian Campbell" <ian.campbell@citrix.com>,
"Pawel Moll" <pawel.moll@arm.com>,
"Stephen Warren" <swarren@wwwdotorg.org>,
"Tony Lindgren" <tony@atomide.com>,
devicetree-discuss@lists.ozlabs.org, linux-pm@vger.kernel.org,
lkml <linux-kernel@vger.kernel.org>,
"Rob Herring" <rob.herring@calxeda.com>,
lm-sensors@lm-sensors.org,
"Eduardo Valentin" <eduardo.valentin@ti.com>,
linux@roeck-us.net, "Benoît Cousson" <bcousson@baylibre.com>,
"Grant Likely" <grant.likely@linaro.org>,
"Russell King" <linux@arm.linux.org.uk>,
rui.zhang@intel.com, linux-omap <linux-omap@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCHv4 11/18] arm: dts: add omap4430 thermal data
Date: Fri, 27 Sep 2013 09:42:49 -0400 [thread overview]
Message-ID: <52458B59.8070703@ti.com> (raw)
In-Reply-To: <CAGo_u6p3pp2EBo_fJE_RJOdrc05OHM-QFgCZFBUW+duhPgOYpw@mail.gmail.com>
[-- Attachment #1.1: Type: text/plain, Size: 2346 bytes --]
On 27-09-2013 09:26, Nishanth Menon wrote:
> On Fri, Sep 27, 2013 at 8:20 AM, Eduardo Valentin
> <eduardo.valentin@ti.com> wrote:
>> On 27-09-2013 08:24, Nishanth Menon wrote:
>>> On 23:13-20130926, Eduardo Valentin wrote:
>>>> This patch changes the dtsi entry on omap4430 to contain
>>>> the thermal data. This data will enable the passive
>>>> cooling with CPUfreq cooling device at 100C and the
>>>> system will do a thermal shutdown at 125C.
>>>>
>>>> Cc: "Benoît Cousson" <bcousson@baylibre.com>
>>>> Cc: Tony Lindgren <tony@atomide.com>
>>>> Cc: Russell King <linux@arm.linux.org.uk>
>>>> Cc: linux-omap@vger.kernel.org
>>>> Cc: devicetree-discuss@lists.ozlabs.org
>>>> Cc: linux-arm-kernel@lists.infradead.org
>>>> Cc: linux-kernel@vger.kernel.org
>>>> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
>>>> ---
>>>> arch/arm/boot/dts/omap443x.dtsi | 10 ++++++++--
>>>> 1 file changed, 8 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
>>>> index bcf455e..e9c97d6 100644
>>>> --- a/arch/arm/boot/dts/omap443x.dtsi
>>>> +++ b/arch/arm/boot/dts/omap443x.dtsi
>>>> @@ -12,7 +12,7 @@
>>>>
>>>> / {
>>>> cpus {
>>>> - cpu@0 {
>>>> + cpu0: cpu@0 {
>>>> /* OMAP443x variants OPP50-OPPNT */
>>>> operating-points = <
>>>> /* kHz uV */
>>>> @@ -25,9 +25,15 @@
>>>> };
>>>> };
>>>>
>>>> - bandgap {
>>>> + thermal-zones{
>>>> + #include "omap4-cpu-thermal.dtsi"
>>>> + };
>>>> +
>>>> + bandgap: bandgap {
>>>> reg = <0x4a002260 0x4
>>>> 0x4a00232C 0x4>;
>>>> compatible = "ti,omap4430-bandgap";
>>>> +
>>>> + #thermal-sensor-cells = <0>;
>>> 2 cents:
>>> we might want to move bandgap under ocp?
>>>
>>
>> Yes, agreed. But I don't think this change is related to this patch or
>> to this series.
>
> Correct - this comment is not related to the current patch, hence my 2
> cents ;) - will be nice to have it cleaned up though..
Yes, it will be cleaned. ;-) Tks.
>
> Regards,
> Nishanth Menon
>
>
--
You have got to be excited about what you are doing. (L. Lamport)
Eduardo Valentin
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 295 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2013-09-27 13:42 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-27 3:13 [PATCHv4 00/18] device thermal limits represented in device tree nodes (v4) Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 01/18] thermal: allow registering without .get_temp Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 02/18] thermal: core: allow binding via .bind when tzp is present Eduardo Valentin
2013-11-06 2:56 ` Wei Ni
2013-09-27 3:13 ` [PATCHv7 03/18] thermal: introduce device tree parser Eduardo Valentin
2013-09-30 15:36 ` Mark Rutland
[not found] ` <20130930153614.GA22259-NuALmloUBlrZROr8t4l/smS4ubULX0JqMm0uRHvK7Nw@public.gmane.org>
2013-09-30 20:47 ` Eduardo Valentin
[not found] ` <1380251605-3804-4-git-send-email-eduardo.valentin-l0cyMroinI0@public.gmane.org>
2013-10-01 2:39 ` [PATCHv8 " Eduardo Valentin
2013-10-07 20:51 ` Mark Rutland
2013-10-08 14:59 ` Eduardo Valentin
2013-11-05 18:08 ` Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 05/18] thermal: cpu_cooling: introduce of_cpufreq_cooling_register Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 06/18] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device properties Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 07/18] hwmon: lm75: expose to thermal fw via DT nodes Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 09/18] thermal: ti-soc-thermal: use thermal DT infrastructure Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 10/18] arm: dts: add omap4 CPU thermal data Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 11/18] arm: dts: add omap4430 " Eduardo Valentin
2013-09-27 12:24 ` Nishanth Menon
2013-09-27 13:20 ` Eduardo Valentin
2013-09-27 13:26 ` Nishanth Menon
2013-09-27 13:42 ` Eduardo Valentin [this message]
2013-09-27 3:13 ` [PATCHv4 12/18] arm: dts: add omap4460 " Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 14/18] arm: dts: add cooling properties on omap4460 cpu node Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 15/18] arm: dts: add omap5 GPU thermal data Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 16/18] arm: dts: add omap5 CORE " Eduardo Valentin
[not found] ` <1380251605-3804-1-git-send-email-eduardo.valentin-l0cyMroinI0@public.gmane.org>
2013-09-27 3:13 ` [PATCHv4 04/18] thermal: core: introduce thermal_of_cooling_device_register Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 08/18] hwmon: tmp102: expose to thermal fw via DT nodes Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 13/18] arm: dts: add cooling properties on omap4430 cpu node Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 17/18] arm: dts: add omap5 thermal data Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 18/18] arm: dts: add cooling properties on omap5 cpu node Eduardo Valentin
2013-09-27 3:15 ` [PATCHv4 00/18] device thermal limits represented in device tree nodes (v4) Eduardo Valentin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52458B59.8070703@ti.com \
--to=eduardo.valentin@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=devicetree@vger.kernel.org \
--cc=durgadoss.r@intel.com \
--cc=grant.likely@linaro.org \
--cc=ian.campbell@citrix.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=linux@roeck-us.net \
--cc=lm-sensors@lm-sensors.org \
--cc=mark.rutland@arm.com \
--cc=nm@ti.com \
--cc=pawel.moll@arm.com \
--cc=rob.herring@calxeda.com \
--cc=rui.zhang@intel.com \
--cc=swarren@wwwdotorg.org \
--cc=tony@atomide.com \
--cc=wni@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).