From: Benoit Cousson <bcousson@baylibre.com>
To: Keerthy <j-keerthy@ti.com>
Cc: Nishanth Menon <nm@ti.com>,
linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org,
pawel.moll@arm.com, devicetree@vger.kernel.org,
rob.herring@calxeda.com, linux-arm-kernel@lists.infradead.org,
balajitk@ti.com
Subject: Re: [PATCH] ARM: DTS: DRA7: Add TPS659038 PMIC nodes
Date: Thu, 03 Oct 2013 15:39:35 +0200 [thread overview]
Message-ID: <524D7397.2000200@baylibre.com> (raw)
In-Reply-To: <522FFFE2.2000705@ti.com>
Hi Keerthy,
On 11/09/2013 07:30, Keerthy wrote:
> On Tuesday 10 September 2013 12:51 AM, Nishanth Menon wrote:
>> On 08/26/2013 12:36 AM, Keerthy wrote:
>>> The Patch adds nodes for TPS659038 PMIC for DRA7 boards.
>>>
>>> It is based on top of:
>>> http://comments.gmane.org/gmane.linux.ports.arm.omap/102459.
>>>
>>> Documentation: Documentation/devicetree/bindings/mfd/palmas.txt
>>> Documentation/devicetree/bindings/regulator/palmas-pmic.txt
>>>
>>> Boot Tested on DRA7 d1 Board.
>>>
>>> Signed-off-by: Keerthy <j-keerthy@ti.com>
>>> ---
>>> arch/arm/boot/dts/dra7-evm.dts | 118
>>> ++++++++++++++++++++++++++++++++++++++++
>>> 1 file changed, 118 insertions(+)
>>>
>>> Index: linux/arch/arm/boot/dts/dra7-evm.dts
>>> ===================================================================
>>> --- linux.orig/arch/arm/boot/dts/dra7-evm.dts 2013-08-26
>>> 09:57:52.496173554 +0530
>>> +++ linux/arch/arm/boot/dts/dra7-evm.dts 2013-08-26
>>> 10:38:44.995414695 +0530
>>> @@ -93,6 +93,119 @@
>>> pinctrl-names = "default";
>>> pinctrl-0 = <&i2c1_pins>;
>>> clock-frequency = <400000>;
>>> +
>>> + tps659038: tps659038@58 {
>>> + compatible = "ti,tps659038";
>>> + reg = <0x58>;
>>> +
>>> + tps659038_pmic {
>>> + compatible = "ti,tps659038-pmic";
>>> +
>>> + regulators {
>>> + smps123_reg: smps123 {
>>> + /* VDD_MPU */
>>> + regulator-name = "smps123";
>>> + regulator-min-microvolt = < 850000>;
>>> + regulator-max-microvolt = <1250000>;
>>> + regulator-always-on;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + smps45_reg: smps45 {
>>> + /* VDD_DSPEVE */
>>> + regulator-name = "smps45";
>>> + regulator-min-microvolt = < 850000>;
>>> + regulator-max-microvolt = <1150000>;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + smps6_reg: smps6 {
>>> + /* VDD_GPU - over VDD_SMPS6 */
>>> + regulator-name = "smps6";
>>> + regulator-min-microvolt = <850000>;
>>> + regulator-max-microvolt = <12500000>;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + smps7_reg: smps7 {
>>> + /* CORE_VDD */
>>> + regulator-name = "smps7";
>>> + regulator-min-microvolt = <850000>;
>>> + regulator-max-microvolt = <1030000>;
>>> + regulator-always-on;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + smps8_reg: smps8 {
>>> + /* VDD_IVAHD */
>>> + regulator-name = "smps8";
>>> + regulator-min-microvolt = < 850000>;
>>> + regulator-max-microvolt = <1250000>;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + smps9_reg: smps9 {
>>> + /* VDDS1V8 */
>>> + regulator-name = "smps9";
>>> + regulator-min-microvolt = <1800000>;
>>> + regulator-max-microvolt = <1800000>;
>>> + regulator-always-on;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + ldo1_reg: ldo1 {
>>> + /* LDO1_OUT --> SDIO */
>>> + regulator-name = "ldo1";
>>> + regulator-min-microvolt = <1800000>;
>>> + regulator-max-microvolt = <3300000>;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + ldo2_reg: ldo2 {
>>> + /* VDD_RTCIO */
>>> + /* LDO2 -> VDDSHV5, LDO2 also goes to
>>> CAN_PHY_3V3 */
>>> + regulator-name = "ldo2";
>>> + regulator-min-microvolt = <3300000>;
>>> + regulator-max-microvolt = <3300000>;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + ldo3_reg: ldo3 {
>>> + /* VDDA_1V8_PHY */
>>> + regulator-name = "ldo3";
>>> + regulator-min-microvolt = <1800000>;
>>> + regulator-max-microvolt = <1800000>;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + ldo9_reg: ldo9 {
>>> + /* VDD_RTC */
>>> + regulator-name = "ldo9";
>>> + regulator-min-microvolt = <1050000>;
>>> + regulator-max-microvolt = <1050000>;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + ldoln_reg: ldoln {
>>> + /* VDDA_1V8_PLL */
>>> + regulator-name = "ldoln";
>>> + regulator-min-microvolt = <1800000>;
>>> + regulator-max-microvolt = <1800000>;
>>> + regulator-always-on;
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + ldousb_reg: ldousb {
>>> + /* VDDA_3V_USB: VDDA_USBHS33 */
>>> + regulator-name = "ldousb";
>>> + regulator-min-microvolt = <3300000>;
>>> + regulator-max-microvolt = <3300000>;
>>> + regulator-boot-on;
>>> + };
>>> +
Nit: Extra blank line not needed.
>>> + };
>>> + };
>>> + };
>>> };
Nit: You have an extra level on indentation not needed.
>>> &i2c2 {
>>>
>> Acked-by: Nishanth Menon <nm@ti.com>
Beside the two minors nits, the patch looks good to me.
Since, you've been waiting for some time for it, I fixed it myself and pulled it.
I even fixed the changelog... Lucky you :-)
You can check the updated version below.
Sorry for the delay.
Thanks,
Benoit
---
>From 3b8f02a2df475c7a48e12eb1911c014f8060b167 Mon Sep 17 00:00:00 2001
From: Keerthy <j-keerthy@ti.com>
Date: Mon, 26 Aug 2013 11:06:51 +0530
Subject: [PATCH] ARM: DTS: DRA7: Add TPS659038 PMIC nodes
Add DT nodes for TPS659038 PMIC on DRA7 boards.
It is based on top of:
http://comments.gmane.org/gmane.linux.ports.arm.omap/102459.
Documentation:
- Documentation/devicetree/bindings/mfd/palmas.txt
- Documentation/devicetree/bindings/regulator/palmas-pmic.txt
Boot Tested on DRA7 d1 Board.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
[bcousson@baylibre.com: Fix indentation and changelog]
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
---
arch/arm/boot/dts/dra7-evm.dts | 112 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 112 insertions(+)
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index ca5dab2..fbbe406 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -93,6 +93,118 @@
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <400000>;
+
+ tps659038: tps659038@58 {
+ compatible = "ti,tps659038";
+ reg = <0x58>;
+
+ tps659038_pmic {
+ compatible = "ti,tps659038-pmic";
+
+ regulators {
+ smps123_reg: smps123 {
+ /* VDD_MPU */
+ regulator-name = "smps123";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps45_reg: smps45 {
+ /* VDD_DSPEVE */
+ regulator-name = "smps45";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ };
+
+ smps6_reg: smps6 {
+ /* VDD_GPU - over VDD_SMPS6 */
+ regulator-name = "smps6";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <12500000>;
+ regulator-boot-on;
+ };
+
+ smps7_reg: smps7 {
+ /* CORE_VDD */
+ regulator-name = "smps7";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1030000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps8_reg: smps8 {
+ /* VDD_IVAHD */
+ regulator-name = "smps8";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-boot-on;
+ };
+
+ smps9_reg: smps9 {
+ /* VDDS1V8 */
+ regulator-name = "smps9";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo1_reg: ldo1 {
+ /* LDO1_OUT --> SDIO */
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ ldo2_reg: ldo2 {
+ /* VDD_RTCIO */
+ /* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ ldo3_reg: ldo3 {
+ /* VDDA_1V8_PHY */
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ ldo9_reg: ldo9 {
+ /* VDD_RTC */
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-boot-on;
+ };
+
+ ldoln_reg: ldoln {
+ /* VDDA_1V8_PLL */
+ regulator-name = "ldoln";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldousb_reg: ldousb {
+ /* VDDA_3V_USB: VDDA_USBHS33 */
+ regulator-name = "ldousb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+ };
+ };
+ };
};
&i2c2 {
--
1.8.1.2
next prev parent reply other threads:[~2013-10-03 13:39 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-26 5:36 [PATCH] ARM: DTS: DRA7: Add TPS659038 PMIC nodes Keerthy
2013-09-03 6:33 ` Keerthy
2013-09-09 19:21 ` Nishanth Menon
2013-09-11 5:30 ` Keerthy
2013-10-03 13:39 ` Benoit Cousson [this message]
[not found] ` <524D7397.2000200-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
2013-10-04 8:25 ` Keerthy
-- strict thread matches above, loose matches on Subject: below --
2013-08-13 5:42 Keerthy
2013-08-14 23:35 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=524D7397.2000200@baylibre.com \
--to=bcousson@baylibre.com \
--cc=balajitk@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=j-keerthy@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=nm@ti.com \
--cc=pawel.moll@arm.com \
--cc=rob.herring@calxeda.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).