From: Keerthy <a0393675-l0cyMroinI0@public.gmane.org>
To: Benoit Cousson <bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
Cc: Keerthy <j-keerthy-l0cyMroinI0@public.gmane.org>,
Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
balajitk-l0cyMroinI0@public.gmane.org
Subject: Re: [PATCH] ARM: DTS: DRA7: Add TPS659038 PMIC nodes
Date: Fri, 4 Oct 2013 13:55:39 +0530 [thread overview]
Message-ID: <524E7B83.2050200@ti.com> (raw)
In-Reply-To: <524D7397.2000200-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
Hi Benoit,
Thanks a lot for fixing it.
On Thursday 03 October 2013 07:09 PM, Benoit Cousson wrote:
> Hi Keerthy,
>
> On 11/09/2013 07:30, Keerthy wrote:
>> On Tuesday 10 September 2013 12:51 AM, Nishanth Menon wrote:
>>> On 08/26/2013 12:36 AM, Keerthy wrote:
>>>> The Patch adds nodes for TPS659038 PMIC for DRA7 boards.
>>>>
>>>> It is based on top of:
>>>> http://comments.gmane.org/gmane.linux.ports.arm.omap/102459.
>>>>
>>>> Documentation: Documentation/devicetree/bindings/mfd/palmas.txt
>>>> Documentation/devicetree/bindings/regulator/palmas-pmic.txt
>>>>
>>>> Boot Tested on DRA7 d1 Board.
>>>>
>>>> Signed-off-by: Keerthy <j-keerthy-l0cyMroinI0@public.gmane.org>
>>>> ---
>>>> arch/arm/boot/dts/dra7-evm.dts | 118
>>>> ++++++++++++++++++++++++++++++++++++++++
>>>> 1 file changed, 118 insertions(+)
>>>>
>>>> Index: linux/arch/arm/boot/dts/dra7-evm.dts
>>>> ===================================================================
>>>> --- linux.orig/arch/arm/boot/dts/dra7-evm.dts 2013-08-26
>>>> 09:57:52.496173554 +0530
>>>> +++ linux/arch/arm/boot/dts/dra7-evm.dts 2013-08-26
>>>> 10:38:44.995414695 +0530
>>>> @@ -93,6 +93,119 @@
>>>> pinctrl-names = "default";
>>>> pinctrl-0 = <&i2c1_pins>;
>>>> clock-frequency = <400000>;
>>>> +
>>>> + tps659038: tps659038@58 {
>>>> + compatible = "ti,tps659038";
>>>> + reg = <0x58>;
>>>> +
>>>> + tps659038_pmic {
>>>> + compatible = "ti,tps659038-pmic";
>>>> +
>>>> + regulators {
>>>> + smps123_reg: smps123 {
>>>> + /* VDD_MPU */
>>>> + regulator-name = "smps123";
>>>> + regulator-min-microvolt = < 850000>;
>>>> + regulator-max-microvolt = <1250000>;
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + };
>>>> +
>>>> + smps45_reg: smps45 {
>>>> + /* VDD_DSPEVE */
>>>> + regulator-name = "smps45";
>>>> + regulator-min-microvolt = < 850000>;
>>>> + regulator-max-microvolt = <1150000>;
>>>> + regulator-boot-on;
>>>> + };
>>>> +
>>>> + smps6_reg: smps6 {
>>>> + /* VDD_GPU - over VDD_SMPS6 */
>>>> + regulator-name = "smps6";
>>>> + regulator-min-microvolt = <850000>;
>>>> + regulator-max-microvolt = <12500000>;
>>>> + regulator-boot-on;
>>>> + };
>>>> +
>>>> + smps7_reg: smps7 {
>>>> + /* CORE_VDD */
>>>> + regulator-name = "smps7";
>>>> + regulator-min-microvolt = <850000>;
>>>> + regulator-max-microvolt = <1030000>;
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + };
>>>> +
>>>> + smps8_reg: smps8 {
>>>> + /* VDD_IVAHD */
>>>> + regulator-name = "smps8";
>>>> + regulator-min-microvolt = < 850000>;
>>>> + regulator-max-microvolt = <1250000>;
>>>> + regulator-boot-on;
>>>> + };
>>>> +
>>>> + smps9_reg: smps9 {
>>>> + /* VDDS1V8 */
>>>> + regulator-name = "smps9";
>>>> + regulator-min-microvolt = <1800000>;
>>>> + regulator-max-microvolt = <1800000>;
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + };
>>>> +
>>>> + ldo1_reg: ldo1 {
>>>> + /* LDO1_OUT --> SDIO */
>>>> + regulator-name = "ldo1";
>>>> + regulator-min-microvolt = <1800000>;
>>>> + regulator-max-microvolt = <3300000>;
>>>> + regulator-boot-on;
>>>> + };
>>>> +
>>>> + ldo2_reg: ldo2 {
>>>> + /* VDD_RTCIO */
>>>> + /* LDO2 -> VDDSHV5, LDO2 also goes to
>>>> CAN_PHY_3V3 */
>>>> + regulator-name = "ldo2";
>>>> + regulator-min-microvolt = <3300000>;
>>>> + regulator-max-microvolt = <3300000>;
>>>> + regulator-boot-on;
>>>> + };
>>>> +
>>>> + ldo3_reg: ldo3 {
>>>> + /* VDDA_1V8_PHY */
>>>> + regulator-name = "ldo3";
>>>> + regulator-min-microvolt = <1800000>;
>>>> + regulator-max-microvolt = <1800000>;
>>>> + regulator-boot-on;
>>>> + };
>>>> +
>>>> + ldo9_reg: ldo9 {
>>>> + /* VDD_RTC */
>>>> + regulator-name = "ldo9";
>>>> + regulator-min-microvolt = <1050000>;
>>>> + regulator-max-microvolt = <1050000>;
>>>> + regulator-boot-on;
>>>> + };
>>>> +
>>>> + ldoln_reg: ldoln {
>>>> + /* VDDA_1V8_PLL */
>>>> + regulator-name = "ldoln";
>>>> + regulator-min-microvolt = <1800000>;
>>>> + regulator-max-microvolt = <1800000>;
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + };
>>>> +
>>>> + ldousb_reg: ldousb {
>>>> + /* VDDA_3V_USB: VDDA_USBHS33 */
>>>> + regulator-name = "ldousb";
>>>> + regulator-min-microvolt = <3300000>;
>>>> + regulator-max-microvolt = <3300000>;
>>>> + regulator-boot-on;
>>>> + };
>>>> +
> Nit: Extra blank line not needed.
>
>>>> + };
>>>> + };
>>>> + };
>>>> };
> Nit: You have an extra level on indentation not needed.
>
>>>> &i2c2 {
>>>>
>>> Acked-by: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>
> Beside the two minors nits, the patch looks good to me.
>
> Since, you've been waiting for some time for it, I fixed it myself and pulled it.
> I even fixed the changelog... Lucky you :-)
>
> You can check the updated version below.
>
> Sorry for the delay.
>
> Thanks,
> Benoit
>
> ---
> From 3b8f02a2df475c7a48e12eb1911c014f8060b167 Mon Sep 17 00:00:00 2001
> From: Keerthy <j-keerthy-l0cyMroinI0@public.gmane.org>
> Date: Mon, 26 Aug 2013 11:06:51 +0530
> Subject: [PATCH] ARM: DTS: DRA7: Add TPS659038 PMIC nodes
>
> Add DT nodes for TPS659038 PMIC on DRA7 boards.
>
> It is based on top of:
> http://comments.gmane.org/gmane.linux.ports.arm.omap/102459.
>
> Documentation:
> - Documentation/devicetree/bindings/mfd/palmas.txt
> - Documentation/devicetree/bindings/regulator/palmas-pmic.txt
>
> Boot Tested on DRA7 d1 Board.
>
> Signed-off-by: Keerthy <j-keerthy-l0cyMroinI0@public.gmane.org>
> Acked-by: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>
> [bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org: Fix indentation and changelog]
> Signed-off-by: Benoit Cousson <bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
> ---
> arch/arm/boot/dts/dra7-evm.dts | 112 +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 112 insertions(+)
>
> diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
> index ca5dab2..fbbe406 100644
> --- a/arch/arm/boot/dts/dra7-evm.dts
> +++ b/arch/arm/boot/dts/dra7-evm.dts
> @@ -93,6 +93,118 @@
> pinctrl-names = "default";
> pinctrl-0 = <&i2c1_pins>;
> clock-frequency = <400000>;
> +
> + tps659038: tps659038@58 {
> + compatible = "ti,tps659038";
> + reg = <0x58>;
> +
> + tps659038_pmic {
> + compatible = "ti,tps659038-pmic";
> +
> + regulators {
> + smps123_reg: smps123 {
> + /* VDD_MPU */
> + regulator-name = "smps123";
> + regulator-min-microvolt = < 850000>;
> + regulator-max-microvolt = <1250000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + smps45_reg: smps45 {
> + /* VDD_DSPEVE */
> + regulator-name = "smps45";
> + regulator-min-microvolt = < 850000>;
> + regulator-max-microvolt = <1150000>;
> + regulator-boot-on;
> + };
> +
> + smps6_reg: smps6 {
> + /* VDD_GPU - over VDD_SMPS6 */
> + regulator-name = "smps6";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <12500000>;
> + regulator-boot-on;
> + };
> +
> + smps7_reg: smps7 {
> + /* CORE_VDD */
> + regulator-name = "smps7";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1030000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + smps8_reg: smps8 {
> + /* VDD_IVAHD */
> + regulator-name = "smps8";
> + regulator-min-microvolt = < 850000>;
> + regulator-max-microvolt = <1250000>;
> + regulator-boot-on;
> + };
> +
> + smps9_reg: smps9 {
> + /* VDDS1V8 */
> + regulator-name = "smps9";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldo1_reg: ldo1 {
> + /* LDO1_OUT --> SDIO */
> + regulator-name = "ldo1";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + };
> +
> + ldo2_reg: ldo2 {
> + /* VDD_RTCIO */
> + /* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */
> + regulator-name = "ldo2";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + };
> +
> + ldo3_reg: ldo3 {
> + /* VDDA_1V8_PHY */
> + regulator-name = "ldo3";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-boot-on;
> + };
> +
> + ldo9_reg: ldo9 {
> + /* VDD_RTC */
> + regulator-name = "ldo9";
> + regulator-min-microvolt = <1050000>;
> + regulator-max-microvolt = <1050000>;
> + regulator-boot-on;
> + };
> +
> + ldoln_reg: ldoln {
> + /* VDDA_1V8_PLL */
> + regulator-name = "ldoln";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldousb_reg: ldousb {
> + /* VDDA_3V_USB: VDDA_USBHS33 */
> + regulator-name = "ldousb";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + };
> + };
> + };
> + };
> };
>
> &i2c2 {
Looks good. Thanks once again.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-10-04 8:25 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-26 5:36 [PATCH] ARM: DTS: DRA7: Add TPS659038 PMIC nodes Keerthy
2013-09-03 6:33 ` Keerthy
2013-09-09 19:21 ` Nishanth Menon
2013-09-11 5:30 ` Keerthy
2013-10-03 13:39 ` Benoit Cousson
[not found] ` <524D7397.2000200-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
2013-10-04 8:25 ` Keerthy [this message]
-- strict thread matches above, loose matches on Subject: below --
2013-08-13 5:42 Keerthy
2013-08-14 23:35 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=524E7B83.2050200@ti.com \
--to=a0393675-l0cymroini0@public.gmane.org \
--cc=balajitk-l0cyMroinI0@public.gmane.org \
--cc=bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=j-keerthy-l0cyMroinI0@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=nm-l0cyMroinI0@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).