Re: [PATCH v16 5/8] soc: mediatek: add mtk-mutex support for mt8195 vdosys0

[Jason-JH Lin <jason-jh.lin@mediatek.com>]

Hi CK,

Thanks for the reviews.

On Fri, 2022-03-18 at 15:21 +0800, CK Hu wrote:
> Hi, Jason:
> 
> On Mon, 2022-03-07 at 11:28 +0800, jason-jh.lin wrote:
> > Add mtk-mutex support for mt8195 vdosys0.
> > 
> > Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
> > Acked-by: AngeloGioacchino Del Regno <
> > angelogioacchino.delregno@collabora.com>
> > ---
> >  drivers/soc/mediatek/mtk-mutex.c | 103
> > ++++++++++++++++++++++++++++++-
> >  1 file changed, 100 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/soc/mediatek/mtk-mutex.c
> > b/drivers/soc/mediatek/mtk-mutex.c
> > index aaf8fc1abb43..1c7ffcdadcea 100644
> > --- a/drivers/soc/mediatek/mtk-mutex.c
> > +++ b/drivers/soc/mediatek/mtk-mutex.c
> > @@ -17,6 +17,9 @@
> >  #define MT8183_MUTEX0_MOD0			0x30
> >  #define MT8183_MUTEX0_SOF0			0x2c
> >  
> > +#define MT8195_DISP_MUTEX0_MOD0			0x30
> > +#define MT8195_DISP_MUTEX0_SOF			0x2c
> > +
> >  #define DISP_REG_MUTEX_EN(n)			(0x20 + 0x20 *
> > (n))
> >  #define DISP_REG_MUTEX(n)			(0x24 + 0x20 * (n))
> >  #define DISP_REG_MUTEX_RST(n)			(0x28 + 0x20 *
> > (n))
> > @@ -96,6 +99,36 @@
> >  #define MT8173_MUTEX_MOD_DISP_PWM1		24
> >  #define MT8173_MUTEX_MOD_DISP_OD		25
> >  

[snip]

> > > +#define MT8195_MUTEX_MOD_DISP_VPP_MERGE		20
> > > +#define MT8195_MUTEX_MOD_DISP_DP_INTF0		21
> > > +#define MT8195_MUTEX_MOD_DISP_VPP1_DL_RELAY0	22
> > > 
> > > Useless, remove.
> > > 
> > > > +#define MT8195_MUTEX_MOD_DISP_VPP1_DL_RELAY1	23
> > > 
> > > Ditto.
> > > 
> > > Regards,
> > > CK
> > 
> > Although these definitions are not used, they represent the
> > functionality provided by this register.
> > 
> > I think we can show that we have these capabilities by defining
> them.
> > 
> > Can we keep these definitions?
> 
> OK, but add some information that we could know how to use it. What's
> these DL_RELAY and when should we add these to mutex?
> 
> Regards,
> CK

DL_RELAY is used for the cross mmsys mux settings.
We won't use these setting currently, so I think
I just remove these useless define.

Thanks.

Regards,
Jason-JH.Lin


[snip]

-- 
Jason-JH Lin <jason-jh.lin@mediatek.com>