* [PATCH v2 1/2] ARM: dts: dra7-evm: Add mmc1 node for micro-sd support
@ 2013-10-07 16:25 Balaji T K
2013-10-07 16:25 ` [PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support Balaji T K
` (2 more replies)
0 siblings, 3 replies; 9+ messages in thread
From: Balaji T K @ 2013-10-07 16:25 UTC (permalink / raw)
To: bcousson, devicetree; +Cc: linux-omap, tony, linux-arm-kernel, Balaji T K
Add mmc1 dt node to dra7-evm board.
Input for ldo1 regulator is controlled by gpio 5 of pcf8575 chip (0x21)
on i2c1 bus. When dt support for gpio-pcf857x is available, input supply
will be modelled as cascaded regulator.
Signed-off-by: Balaji T K <balajitk@ti.com>
---
Rebase to for_3.13/dts
arch/arm/boot/dts/dra7-evm.dts | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index fbbe406..65cd15a 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -250,3 +250,9 @@
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&ldo1_reg>;
+ bus-width = <4>;
+};
--
1.7.5.4
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support
2013-10-07 16:25 [PATCH v2 1/2] ARM: dts: dra7-evm: Add mmc1 node for micro-sd support Balaji T K
@ 2013-10-07 16:25 ` Balaji T K
2013-10-09 13:12 ` Nishanth Menon
2013-10-09 18:53 ` Sekhar Nori
2013-10-09 13:14 ` [PATCH v2 1/2] ARM: dts: dra7-evm: Add mmc1 node for micro-sd support Nishanth Menon
[not found] ` <1381163104-6318-1-git-send-email-balajitk-l0cyMroinI0@public.gmane.org>
2 siblings, 2 replies; 9+ messages in thread
From: Balaji T K @ 2013-10-07 16:25 UTC (permalink / raw)
To: bcousson, devicetree; +Cc: linux-omap, tony, linux-arm-kernel, Balaji T K
Add mmc2 dt node to dra7-evm board
and model eMMC vcc as fixed regulator.
Signed-off-by: Balaji T K <balajitk@ti.com>
---
Rebase to for_3.13/dts
and removed ti,non-removable
arch/arm/boot/dts/dra7-evm.dts | 13 +++++++++++++
1 files changed, 13 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 65cd15a..3abf5f4 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -17,6 +17,13 @@
device_type = "memory";
reg = <0x80000000 0x60000000>; /* 1536 MB */
};
+
+ mmc2_3v3: fixedregulator-mmc2 {
+ compatible = "regulator-fixed";
+ regulator-name = "mmc2_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
};
&dra7_pmx_core {
@@ -256,3 +263,9 @@
vmmc-supply = <&ldo1_reg>;
bus-width = <4>;
};
+
+&mmc2 {
+ status = "okay";
+ vmmc-supply = <&mmc2_3v3>;
+ bus-width = <8>;
+};
--
1.7.5.4
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support
2013-10-07 16:25 ` [PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support Balaji T K
@ 2013-10-09 13:12 ` Nishanth Menon
2013-10-09 18:53 ` Sekhar Nori
1 sibling, 0 replies; 9+ messages in thread
From: Nishanth Menon @ 2013-10-09 13:12 UTC (permalink / raw)
To: Balaji T K, bcousson, devicetree; +Cc: linux-omap, tony, linux-arm-kernel
On 10/07/2013 11:25 AM, Balaji T K wrote:
> Add mmc2 dt node to dra7-evm board
> and model eMMC vcc as fixed regulator.
>
> Signed-off-by: Balaji T K <balajitk@ti.com>
> ---
> Rebase to for_3.13/dts
> and removed ti,non-removable
>
> arch/arm/boot/dts/dra7-evm.dts | 13 +++++++++++++
> 1 files changed, 13 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
> index 65cd15a..3abf5f4 100644
> --- a/arch/arm/boot/dts/dra7-evm.dts
> +++ b/arch/arm/boot/dts/dra7-evm.dts
> @@ -17,6 +17,13 @@
> device_type = "memory";
> reg = <0x80000000 0x60000000>; /* 1536 MB */
> };
> +
> + mmc2_3v3: fixedregulator-mmc2 {
> + compatible = "regulator-fixed";
> + regulator-name = "mmc2_3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> };
>
> &dra7_pmx_core {
> @@ -256,3 +263,9 @@
> vmmc-supply = <&ldo1_reg>;
> bus-width = <4>;
> };
> +
> +&mmc2 {
> + status = "okay";
> + vmmc-supply = <&mmc2_3v3>;
> + bus-width = <8>;
> +};
>
boot tested on DRA7-EVM
voltage rail is correct based on schematics(rev d1) too.
Reviewed-by: Nishanth Menon <nm@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
--
Regards,
Nishanth Menon
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support
2013-10-07 16:25 ` [PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support Balaji T K
2013-10-09 13:12 ` Nishanth Menon
@ 2013-10-09 18:53 ` Sekhar Nori
1 sibling, 0 replies; 9+ messages in thread
From: Sekhar Nori @ 2013-10-09 18:53 UTC (permalink / raw)
To: Balaji T K; +Cc: bcousson, devicetree, linux-omap, tony, linux-arm-kernel
On Monday 07 October 2013 09:55 PM, Balaji T K wrote:
> Add mmc2 dt node to dra7-evm board
> and model eMMC vcc as fixed regulator.
>
> Signed-off-by: Balaji T K <balajitk@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Thanks,
Sekhar
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v2 1/2] ARM: dts: dra7-evm: Add mmc1 node for micro-sd support
2013-10-07 16:25 [PATCH v2 1/2] ARM: dts: dra7-evm: Add mmc1 node for micro-sd support Balaji T K
2013-10-07 16:25 ` [PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support Balaji T K
@ 2013-10-09 13:14 ` Nishanth Menon
[not found] ` <1381163104-6318-1-git-send-email-balajitk-l0cyMroinI0@public.gmane.org>
2 siblings, 0 replies; 9+ messages in thread
From: Nishanth Menon @ 2013-10-09 13:14 UTC (permalink / raw)
To: Balaji T K, bcousson, devicetree; +Cc: linux-omap, tony, linux-arm-kernel
On 10/07/2013 11:25 AM, Balaji T K wrote:
> Add mmc1 dt node to dra7-evm board.
> Input for ldo1 regulator is controlled by gpio 5 of pcf8575 chip (0x21)
> on i2c1 bus. When dt support for gpio-pcf857x is available, input supply
> will be modelled as cascaded regulator.
>
> Signed-off-by: Balaji T K <balajitk@ti.com>
> ---
> Rebase to for_3.13/dts
>
> arch/arm/boot/dts/dra7-evm.dts | 6 ++++++
> 1 files changed, 6 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
> index fbbe406..65cd15a 100644
> --- a/arch/arm/boot/dts/dra7-evm.dts
> +++ b/arch/arm/boot/dts/dra7-evm.dts
> @@ -250,3 +250,9 @@
> pinctrl-names = "default";
> pinctrl-0 = <&uart3_pins>;
> };
> +
> +&mmc1 {
> + status = "okay";
> + vmmc-supply = <&ldo1_reg>;
> + bus-width = <4>;
> +};
>
boot tested on DRA7-EVM
voltage rail is correct based on schematics(rev d1) too
(LDO1->MMC1_3V3->SDcard).
Reviewed-by: Nishanth Menon <nm@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
--
Regards,
Nishanth Menon
^ permalink raw reply [flat|nested] 9+ messages in thread[parent not found: <1381163104-6318-1-git-send-email-balajitk-l0cyMroinI0@public.gmane.org>]
* Re: [PATCH v2 1/2] ARM: dts: dra7-evm: Add mmc1 node for micro-sd support
[not found] ` <1381163104-6318-1-git-send-email-balajitk-l0cyMroinI0@public.gmane.org>
@ 2013-10-09 18:51 ` Sekhar Nori
2013-10-11 16:44 ` Balaji T K
0 siblings, 1 reply; 9+ messages in thread
From: Sekhar Nori @ 2013-10-09 18:51 UTC (permalink / raw)
To: Balaji T K
Cc: bcousson-rdvid1DuHRBWk0Htik3J/w,
devicetree-u79uwXL29TY76Z2rM5mHXA, tony-4v6yS6AI5VpBDgjK7y7TUQ,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
On Monday 07 October 2013 09:55 PM, Balaji T K wrote:
> Add mmc1 dt node to dra7-evm board.
> Input for ldo1 regulator is controlled by gpio 5 of pcf8575 chip (0x21)
> on i2c1 bus. When dt support for gpio-pcf857x is available, input supply
> will be modelled as cascaded regulator.
>
> Signed-off-by: Balaji T K <balajitk-l0cyMroinI0@public.gmane.org>
Acked-by: Sekhar Nori <nsekhar-l0cyMroinI0@public.gmane.org>
Thanks,
Sekhar
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH v2 1/2] ARM: dts: dra7-evm: Add mmc1 node for micro-sd support
2013-10-09 18:51 ` Sekhar Nori
@ 2013-10-11 16:44 ` Balaji T K
2013-10-11 19:16 ` Benoit Cousson
0 siblings, 1 reply; 9+ messages in thread
From: Balaji T K @ 2013-10-11 16:44 UTC (permalink / raw)
To: Sekhar Nori; +Cc: bcousson, devicetree, tony, linux-omap, linux-arm-kernel
On Thursday 10 October 2013 12:21 AM, Sekhar Nori wrote:
> On Monday 07 October 2013 09:55 PM, Balaji T K wrote:
>> Add mmc1 dt node to dra7-evm board.
>> Input for ldo1 regulator is controlled by gpio 5 of pcf8575 chip (0x21)
>> on i2c1 bus. When dt support for gpio-pcf857x is available, input supply
>> will be modelled as cascaded regulator.
>>
>> Signed-off-by: Balaji T K <balajitk@ti.com>
>
> Acked-by: Sekhar Nori <nsekhar@ti.com>
>
Hi Benoit,
Can you let me know if you have any comments on this patch series?
Thanks and Regards
Balaji T K
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v2 1/2] ARM: dts: dra7-evm: Add mmc1 node for micro-sd support
2013-10-11 16:44 ` Balaji T K
@ 2013-10-11 19:16 ` Benoit Cousson
2013-10-12 15:37 ` Balaji T K
0 siblings, 1 reply; 9+ messages in thread
From: Benoit Cousson @ 2013-10-11 19:16 UTC (permalink / raw)
To: Balaji T K, Sekhar Nori; +Cc: devicetree, tony, linux-omap, linux-arm-kernel
Hi Balaji,
On 11/10/2013 18:44, Balaji T K wrote:
> On Thursday 10 October 2013 12:21 AM, Sekhar Nori wrote:
>> On Monday 07 October 2013 09:55 PM, Balaji T K wrote:
>>> Add mmc1 dt node to dra7-evm board.
>>> Input for ldo1 regulator is controlled by gpio 5 of pcf8575 chip (0x21)
>>> on i2c1 bus. When dt support for gpio-pcf857x is available, input supply
>>> will be modelled as cascaded regulator.
>>>
>>> Signed-off-by: Balaji T K <balajitk@ti.com>
>>
>> Acked-by: Sekhar Nori <nsekhar@ti.com>
>>
> Hi Benoit,
>
> Can you let me know if you have any comments on this patch series?
The series looks good, and I've just applied it for 3.13.
Thanks,
Benoit
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v2 1/2] ARM: dts: dra7-evm: Add mmc1 node for micro-sd support
2013-10-11 19:16 ` Benoit Cousson
@ 2013-10-12 15:37 ` Balaji T K
0 siblings, 0 replies; 9+ messages in thread
From: Balaji T K @ 2013-10-12 15:37 UTC (permalink / raw)
To: Benoit Cousson
Cc: Sekhar Nori, devicetree, tony, linux-omap, linux-arm-kernel
On Saturday 12 October 2013 12:46 AM, Benoit Cousson wrote:
> Hi Balaji,
>
> On 11/10/2013 18:44, Balaji T K wrote:
>> On Thursday 10 October 2013 12:21 AM, Sekhar Nori wrote:
>>> On Monday 07 October 2013 09:55 PM, Balaji T K wrote:
>>>> Add mmc1 dt node to dra7-evm board.
>>>> Input for ldo1 regulator is controlled by gpio 5 of pcf8575 chip (0x21)
>>>> on i2c1 bus. When dt support for gpio-pcf857x is available, input supply
>>>> will be modelled as cascaded regulator.
>>>>
>>>> Signed-off-by: Balaji T K <balajitk@ti.com>
>>>
>>> Acked-by: Sekhar Nori <nsekhar@ti.com>
>>>
>> Hi Benoit,
>>
>> Can you let me know if you have any comments on this patch series?
>
> The series looks good, and I've just applied it for 3.13.
>
Thanks Benoit
- Balaji T K
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2013-10-12 15:37 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-10-07 16:25 [PATCH v2 1/2] ARM: dts: dra7-evm: Add mmc1 node for micro-sd support Balaji T K
2013-10-07 16:25 ` [PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support Balaji T K
2013-10-09 13:12 ` Nishanth Menon
2013-10-09 18:53 ` Sekhar Nori
2013-10-09 13:14 ` [PATCH v2 1/2] ARM: dts: dra7-evm: Add mmc1 node for micro-sd support Nishanth Menon
[not found] ` <1381163104-6318-1-git-send-email-balajitk-l0cyMroinI0@public.gmane.org>
2013-10-09 18:51 ` Sekhar Nori
2013-10-11 16:44 ` Balaji T K
2013-10-11 19:16 ` Benoit Cousson
2013-10-12 15:37 ` Balaji T K
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).