From: Lokesh Vutla <lokeshvutla@ti.com>
To: Lokesh Vutla <lokeshvutla@ti.com>
Cc: devicetree@vger.kernel.org, paul@pwsan.com, tony@atomide.com,
rnayak@ti.com, bcousson@baylibre.com, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [RESEND PATCH V2 1/2] ARM: dts: AM33xx: Add RNG node
Date: Sat, 12 Oct 2013 18:56:08 +0530 [thread overview]
Message-ID: <52594DF0.1050002@ti.com> (raw)
In-Reply-To: <1377780731-3648-2-git-send-email-lokeshvutla@ti.com>
Hi Benoit,
On Thursday 29 August 2013 06:22 PM, Lokesh Vutla wrote:
> Add the AM33xx RNG module's device tree data.
> Also add Documentation file describing the data
> for the RNG module.
Seems you missed this patch. Please consider this for this merge window.
Patch 2/2 is already taken by Paul.
Without this patch AM335x boot will crash as I mentioned in my cover letter.
Thanks and regards,
Lokesh
>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> ---
> Changes since V1:
> - Drop "status=disabled" entry in dt node, Since
> RNG is present on all AM33xx platforms.
>
> .../devicetree/bindings/hwrng/omap_rng.txt | 22 ++++++++++++++++++++
> arch/arm/boot/dts/am33xx.dtsi | 7 +++++++
> 2 files changed, 29 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwrng/omap_rng.txt
>
> diff --git a/Documentation/devicetree/bindings/hwrng/omap_rng.txt b/Documentation/devicetree/bindings/hwrng/omap_rng.txt
> new file mode 100644
> index 0000000..6a62acd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwrng/omap_rng.txt
> @@ -0,0 +1,22 @@
> +OMAP SoC HWRNG Module
> +
> +Required properties:
> +
> +- compatible : Should contain entries for this and backward compatible
> + RNG versions:
> + - "ti,omap2-rng" for OMAP2.
> + - "ti,omap4-rng" for OMAP4, OMAP5 and AM33XX.
> + Note that these two versions are incompatible.
> +- ti,hwmods: Name of the hwmod associated with the RNG module
> +- reg : Offset and length of the register set for the module
> +- interrupts : the interrupt number for the RNG module.
> + Only used for "ti,omap4-rng".
> +
> +Example:
> +/* AM335x */
> +rng: rng@48310000 {
> + compatible = "ti,omap4-rng";
> + ti,hwmods = "rng";
> + reg = <0x48310000 0x2000>;
> + interrupts = <111>;
> +};
> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> index 38b446b..26ebe30 100644
> --- a/arch/arm/boot/dts/am33xx.dtsi
> +++ b/arch/arm/boot/dts/am33xx.dtsi
> @@ -530,5 +530,12 @@
> #size-cells = <1>;
> status = "disabled";
> };
> +
> + rng: rng@48310000 {
> + compatible = "ti,omap4-rng";
> + ti,hwmods = "rng";
> + reg = <0x48310000 0x2000>;
> + interrupts = <111>;
> + };
> };
> };
>
next prev parent reply other threads:[~2013-10-12 13:26 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-29 12:52 [RESEND PATCH V2 0/2] ARM: AM33xx: Add RNG Moudle data Lokesh Vutla
2013-08-29 12:52 ` [RESEND PATCH V2 1/2] ARM: dts: AM33xx: Add RNG node Lokesh Vutla
2013-10-12 13:26 ` Lokesh Vutla [this message]
2013-10-12 21:51 ` Paul Walmsley
2013-10-15 6:49 ` Benoit Cousson
2013-10-16 6:12 ` Lokesh Vutla
2013-10-16 11:16 ` Lokesh Vutla
2013-10-29 21:00 ` Tony Lindgren
2013-10-29 23:28 ` Kumar Gala
2013-08-29 12:52 ` [RESEND PATCH V2 2/2] ARM: AM33xx: hwmod: Add RNG module data Lokesh Vutla
2013-10-09 15:03 ` Paul Walmsley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52594DF0.1050002@ti.com \
--to=lokeshvutla@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=paul@pwsan.com \
--cc=rnayak@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).