[PATCH v4 0/4] Add Support for Wave5 on TI Devices

[PATCH v4 0/4] Add Support for Wave5 on TI Devices

[Brandon Brnich]

This series is responsible for adding support for Wave5 driver[0]
across numerous TI K3 platforms.

[0]: https://lore.kernel.org/all/ae6d2ad3-0b2a-462a-a9eb-9ce01e7a7f5e@xs4all.nl/

Changes since v3:
=================

* Address Andrew's comments
  - remove disabled by default on all platforms
  - reorder addresses in 84s4 to be correctly sorted

Changes since v2:
=================

* Remove reference to k3 as requested
* Rebase on v6.8-rc2 where new bindings are present
* Remove am62a dts entry until hrtimer[1] patch gets merged

[1]: https://patchwork.kernel.org/project/linux-media/patch/20240125130833.1953617-1-devarsht@ti.com/

Changes since v1:
=================

* Remove sram parameters
  - sram-size property not included in bindings. Without this, size
  will default to 0 so no point in specifying until binding is added.
* Remove global CMA pools for each platform
  - This is something that has been added in TI backport of driver
  and does not yet have reliable support in upstream version.
  - Removing for now with intention to add back once 48-bit
  addressing is supported in upstream Wave5 driver.

Brandon Brnich (3):
  arm64: dts: ti: k3-j784s4: Add Wave5 Video Encoder/Decoder Node
  arm64: dts: ti: k3-am62p: Add Wave5 Video Encoder/Decoder Node
  arm64: defconfig: Enable Wave5 Video Encoder/Decoder

Darren Etheridge (1):
  arm64: dts: ti: k3-j721s2-main: Add Wave5 Video Encoder/Decoder Node

 arch/arm64/boot/dts/ti/k3-am62p-main.dtsi  |  9 +++++++++
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi |  9 +++++++++
 arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 18 ++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-j784s4.dtsi      |  2 ++
 arch/arm64/configs/defconfig               |  1 +
 5 files changed, 39 insertions(+)

-- 
2.34.1

[PATCH v4 1/4] arm64: dts: ti: k3-j784s4: Add Wave5 Video Encoder/Decoder Node

[Brandon Brnich]

This patch adds support for the Wave521cl on the J784S4-evm.

Signed-off-by: Brandon Brnich <b-brnich@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 18 ++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-j784s4.dtsi      |  2 ++
 2 files changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index f2b720ed1e4f..e628e748f215 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -662,6 +662,24 @@ main_i2c6: i2c@2060000 {
 		status = "disabled";
 	};
 
+	vpu0: video-codec@4210000 {
+		compatible = "ti,j721s2-wave521c", "cnm,wave521c";
+		reg = <0x00 0x4210000 0x00 0x10000>;
+		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 241 2>;
+		clock-names = "vcodec";
+		power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	vpu1: video-codec@4220000 {
+		compatible = "ti,j721s2-wave521c", "cnm,wave521c";
+		reg = <0x00 0x4220000 0x00 0x10000>;
+		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 242 2>;
+		clock-names = "vcodec";
+		power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>;
+	};
+
 	main_sdhci0: mmc@4f80000 {
 		compatible = "ti,j721e-sdhci-8bit";
 		reg = <0x00 0x04f80000 0x00 0x1000>,
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
index 4398c3a463e1..2f633721a0c6 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
@@ -235,6 +235,8 @@ cbass_main: bus@100000 {
 		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
 			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
 			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
+			 <0x00 0x04210000 0x00 0x04210000 0x00 0x00010000>, /* VPU0 */
+			 <0x00 0x04220000 0x00 0x04220000 0x00 0x00010000>, /* VPU1 */
 			 <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/
 			 <0x00 0x10000000 0x00 0x10000000 0x00 0x08000000>, /* PCIe0 DAT0 */
 			 <0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */
-- 
2.34.1

[PATCH v4 2/4] arm64: dts: ti: k3-j721s2-main: Add Wave5 Video Encoder/Decoder Node

[Brandon Brnich]

From: Darren Etheridge <detheridge@ti.com>

Add the Chips and Media wave521cl video decoder/encoder node on J721S2.

Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Brandon Brnich <b-brnich@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index ea7f2b2ab165..df4cdbf94539 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -716,6 +716,15 @@ main_i2c6: i2c@2060000 {
 		status = "disabled";
 	};
 
+	vpu: video-codec@4210000 {
+		compatible = "ti,j721s2-wave521c", "cnm,wave521c";
+		reg = <0x00 0x4210000 0x00 0x10000>;
+		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 179 2>;
+		clock-names = "vcodec";
+		power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
+	};
+
 	main_sdhci0: mmc@4f80000 {
 		compatible = "ti,j721e-sdhci-8bit";
 		reg = <0x00 0x04f80000 0x00 0x1000>,
-- 
2.34.1

[PATCH v4 3/4] arm64: dts: ti: k3-am62p: Add Wave5 Video Encoder/Decoder Node

[Brandon Brnich]

This patch adds support for the Wave521cl on the AM62P.

Signed-off-by: Brandon Brnich <b-brnich@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62p-main.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
index 4c51bae06b57..d550660ca4c7 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
@@ -891,4 +891,13 @@ mcasp2: audio-controller@2b20000 {
 		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
 		status = "disabled";
 	};
+
+	vpu: video-codec@30210000 {
+		compatible = "ti,j721s2-wave521c", "cnm,wave521c";
+		reg = <0x00 0x30210000 0x00 0x10000>;
+		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 204 2>;
+		clock-names = "vcodec";
+		power-domains = <&k3_pds 204 TI_SCI_PD_EXCLUSIVE>;
+	};
 };
-- 
2.34.1

[PATCH v4 4/4] arm64: defconfig: Enable Wave5 Video Encoder/Decoder

[Brandon Brnich]

Enable Wave521c video decoder/encoder driver on all TI
K3 platforms that contain the IP.

Signed-off-by: Brandon Brnich <b-brnich@ti.com>
---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index e6cf3e5d63c3..6fe4f2da4aca 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -795,6 +795,7 @@ CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_CADENCE_CSI2RX=m
 CONFIG_VIDEO_MEDIATEK_JPEG=m
 CONFIG_VIDEO_MEDIATEK_VCODEC=m
+CONFIG_VIDEO_WAVE_VPU=m
 CONFIG_VIDEO_IMX7_CSI=m
 CONFIG_VIDEO_IMX_MIPI_CSIS=m
 CONFIG_VIDEO_IMX8_ISI=m
-- 
2.34.1

Re: [PATCH v4 1/4] arm64: dts: ti: k3-j784s4: Add Wave5 Video Encoder/Decoder Node

[Vignesh Raghavendra]

Hi Brandon

On 06/02/24 01:17, Brandon Brnich wrote:
> This patch adds support for the Wave521cl on the J784S4-evm.
> 
> Signed-off-by: Brandon Brnich <b-brnich@ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 18 ++++++++++++++++++
>  arch/arm64/boot/dts/ti/k3-j784s4.dtsi      |  2 ++
>  2 files changed, 20 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
> index f2b720ed1e4f..e628e748f215 100644
> --- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
> @@ -662,6 +662,24 @@ main_i2c6: i2c@2060000 {
>  		status = "disabled";
>  	};
>  
> +	vpu0: video-codec@4210000 {
> +		compatible = "ti,j721s2-wave521c", "cnm,wave521c";
> +		reg = <0x00 0x4210000 0x00 0x10000>;
> +		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&k3_clks 241 2>;
> +		clock-names = "vcodec";

Binding doesn't allow clock-names [0]

[0] Documentation/devicetree/bindings/media/cnm,wave521c.yaml

> +		power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>;
> +	};
> +
> +	vpu1: video-codec@4220000 {
> +		compatible = "ti,j721s2-wave521c", "cnm,wave521c";
> +		reg = <0x00 0x4220000 0x00 0x10000>;
> +		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&k3_clks 242 2>;
> +		clock-names = "vcodec";
> +		power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>;
> +	};
> +
>  	main_sdhci0: mmc@4f80000 {
>  		compatible = "ti,j721e-sdhci-8bit";
>  		reg = <0x00 0x04f80000 0x00 0x1000>,
> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
> index 4398c3a463e1..2f633721a0c6 100644
> --- a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
> @@ -235,6 +235,8 @@ cbass_main: bus@100000 {
>  		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
>  			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
>  			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
> +			 <0x00 0x04210000 0x00 0x04210000 0x00 0x00010000>, /* VPU0 */
> +			 <0x00 0x04220000 0x00 0x04220000 0x00 0x00010000>, /* VPU1 */
>  			 <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/
>  			 <0x00 0x10000000 0x00 0x10000000 0x00 0x08000000>, /* PCIe0 DAT0 */
>  			 <0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */

-- 
Regards
Vignesh