[PATCH 0/2] ARM: dts: AM4372: Add more nodes

[PATCH 0/2] ARM: dts: AM4372: Add more nodes

[Lokesh Vutla]

This patch series add nodes for l2-cache-controller, EDMA, mailbox, mmc, sham,
and updates the properties for cpsw, i2c0, matrix-keypad. 

These patches are applied on top of Benoit's for_3.13/dts branch
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.13/dts

Testing:
Tested EDMA, mmc, sham, aes, des, i2c0, cpsw, matric-keypad on AM4372 EPOS EVM
with the addition of following two series:
-> Tero's V8 of OMAP DT clock conversion
  http://www.mail-archive.com/linux-omap@vger.kernel.org/msg96769.html
-> Afzal's V5 of AM43x PRCM basic support
  http://www.mail-archive.com/linux-omap@vger.kernel.org/msg96275.html

Lokesh Vutla (1):
  ARM: dts: AM4372: Add more nodes

Mugunthan V N (1):
  ARM: dts: AM4372: Update Support for EPOS EVM

 arch/arm/boot/dts/am4372.dtsi        |  210 +++++++++++++++++++++++++++++++++-
 arch/arm/boot/dts/am43x-epos-evm.dts |  168 +++++++++++++++++++++++++++
 include/dt-bindings/pinctrl/am43xx.h |   31 +++++
 3 files changed, 408 insertions(+), 1 deletion(-)
 create mode 100644 include/dt-bindings/pinctrl/am43xx.h

-- 
1.7.9.5

[PATCH 1/2] ARM: dts: AM4372: Add more nodes

[Lokesh Vutla]

Populate nodes for l2-cache-controller, EDMA, mailbox,
mmc, sham.

And also updating dt properties for epwmss, aes, des.

Few nodes are taken from a different tree that are added by
Suman Anna <s-anna@ti.com> (Mailbox)
Balaji T K <balajitk@ti.com> (MMC)
Mugunthan V N <mugunthanvnm@ti.com> (Pinmux, Ethernet)

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 arch/arm/boot/dts/am4372.dtsi |  210 ++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 209 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index a403172..c328d5c 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -19,6 +19,8 @@
 
 	aliases {
 		serial0 = &uart0;
+		ethernet0 = &cpsw_emac0;
+		ethernet1 = &cpsw_emac1;
 	};
 
 	cpus {
@@ -39,11 +41,42 @@
 		      <0x48240100 0x0100>;
 	};
 
+	l2-cache-controller@48242000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x48242000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	am43xx_pinmux: pinmux@44e10800 {
+		compatible = "pinctrl-single";
+		reg = <0x44e10800 0x31c>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
 	ocp {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
+		ti,hwmods = "l3_main";
+
+		edma: edma@49000000 {
+			compatible = "ti,edma3";
+			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
+			reg =	<0x49000000 0x10000>,
+				<0x44e10f90 0x10>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <64>;
+			ti,edma-regions = <4>;
+			ti,edma-slots = <256>;
+		};
 
 		uart0: serial@44e09000 {
 			compatible = "ti,am4372-uart","ti,omap2-uart";
@@ -92,6 +125,18 @@
 			status = "disabled";
 		};
 
+		mailbox: mailbox@480C8000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x480C8000 0x200>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox";
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <8>;
+			ti,mbox-names = "wkup_m3";
+			ti,mbox-data = <0 0 0 0>;
+			status = "disabled";
+		};
+
 		timer1: timer@44e31000 {
 			compatible = "ti,am4372-timer-1ms","ti,am335x-timer-1ms";
 			reg = <0x44e31000 0x400>;
@@ -203,7 +248,6 @@
 			reg = <0x44e35000 0x1000>;
 			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "wd_timer2";
-			status = "disabled";
 		};
 
 		gpio0: gpio@44e07000 {
@@ -318,6 +362,40 @@
 			status = "disabled";
 		};
 
+		mmc1: mmc@48060000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x48060000 0x1000>;
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			ti,needs-special-reset;
+			dmas = <&edma 24
+				&edma 25>;
+			dma-names = "tx", "rx";
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		mmc2: mmc@481d8000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x481d8000 0x1000>;
+			ti,hwmods = "mmc2";
+			ti,needs-special-reset;
+			dmas = <&edma 2
+				&edma 3>;
+			dma-names = "tx", "rx";
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		mmc3: mmc@47810000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x47810000 0x1000>;
+			ti,hwmods = "mmc3";
+			ti,needs-special-reset;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		spi1: spi@481a0000 {
 			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
 			reg = <0x481a0000 0x400>;
@@ -366,50 +444,173 @@
 				      GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH
 				      GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH
 				      GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			ti,hwmods = "cpgmac0";
 			status = "disabled";
+			cpdma_channels = <8>;
+			ale_entries = <1024>;
+			bd_ram_size = <0x2000>;
+			no_bd_ram = <0>;
+			rx_descs = <64>;
+			mac_control = <0x20>;
+			slaves = <2>;
+			active_slave = <0>;
+			cpts_clock_mult = <0x80000000>;
+			cpts_clock_shift = <29>;
+			ranges;
+
+			davinci_mdio: mdio@4a101000 {
+				compatible = "ti,am4372-mdio","ti,davinci_mdio";
+				reg = <0x4a101000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,hwmods = "davinci_mdio";
+				bus_freq = <1000000>;
+				status = "disabled";
+			};
+
+			cpsw_emac0: slave@4a100200 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			cpsw_emac1: slave@4a100300 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
 		};
 
 		epwmss0: epwmss@48300000 {
 			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
 			reg = <0x48300000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 			ti,hwmods = "epwmss0";
 			status = "disabled";
+
+			ecap0: ecap@48300100 {
+				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				reg = <0x48300100 0x80>;
+				ti,hwmods = "ecap0";
+				status = "disabled";
+			};
+
+			ehrpwm0: ehrpwm@48300200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				reg = <0x48300200 0x80>;
+				ti,hwmods = "ehrpwm0";
+				status = "disabled";
+			};
 		};
 
 		epwmss1: epwmss@48302000 {
 			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
 			reg = <0x48302000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 			ti,hwmods = "epwmss1";
 			status = "disabled";
+
+			ecap1: ecap@48302100 {
+				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				reg = <0x48302100 0x80>;
+				ti,hwmods = "ecap1";
+				status = "disabled";
+			};
+
+			ehrpwm1: ehrpwm@48302200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				reg = <0x48302200 0x80>;
+				ti,hwmods = "ehrpwm1";
+				status = "disabled";
+			};
 		};
 
 		epwmss2: epwmss@48304000 {
 			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
 			reg = <0x48304000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 			ti,hwmods = "epwmss2";
 			status = "disabled";
+
+			ecap2: ecap@48304100 {
+				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				reg = <0x48304100 0x80>;
+				ti,hwmods = "ecap2";
+				status = "disabled";
+			};
+
+			ehrpwm2: ehrpwm@48304200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				reg = <0x48304200 0x80>;
+				ti,hwmods = "ehrpwm2";
+				status = "disabled";
+			};
 		};
 
 		epwmss3: epwmss@48306000 {
 			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
 			reg = <0x48306000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 			ti,hwmods = "epwmss3";
 			status = "disabled";
+
+			ehrpwm3: ehrpwm@48306200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				reg = <0x48306200 0x80>;
+				ti,hwmods = "ehrpwm3";
+				status = "disabled";
+			};
 		};
 
 		epwmss4: epwmss@48308000 {
 			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
 			reg = <0x48308000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 			ti,hwmods = "epwmss4";
 			status = "disabled";
+
+			ehrpwm4: ehrpwm@48308200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				reg = <0x48308200 0x80>;
+				ti,hwmods = "ehrpwm4";
+				status = "disabled";
+			};
 		};
 
 		epwmss5: epwmss@4830a000 {
 			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
 			reg = <0x4830a000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 			ti,hwmods = "epwmss5";
 			status = "disabled";
+
+			ehrpwm5: ehrpwm@4830a200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				reg = <0x4830a200 0x80>;
+				ti,hwmods = "ehrpwm5";
+				status = "disabled";
+			};
+		};
+
+		sham: sham@53100000 {
+			compatible = "ti,omap5-sham";
+			ti,hwmods = "sham";
+			reg = <0x53100000 0x300>;
+			dmas = <&edma 36>;
+			dma-names = "rx";
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		aes: aes@53501000 {
@@ -417,6 +618,9 @@
 			ti,hwmods = "aes";
 			reg = <0x53501000 0xa0>;
 			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&edma 6
+				&edma 5>;
+			dma-names = "tx", "rx";
 		};
 
 		des: des@53701000 {
@@ -424,6 +628,10 @@
 			ti,hwmods = "des";
 			reg = <0x53701000 0xa0>;
 			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&edma 34
+				&edma 33>;
+			dma-names = "tx", "rx";
 		};
+
 	};
 };
-- 
1.7.9.5

[PATCH 2/2] ARM: dts: AM4372: Update Support for EPOS EVM

[Lokesh Vutla]

From: Mugunthan V N <mugunthanvnm@ti.com>

-> Adding pinmux for cpsw, i2c0.
-> Enabling the modules that are present in AM4372 EPOS EVM
These modules are tested on AM4372 EPOS EVM.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
---
 arch/arm/boot/dts/am43x-epos-evm.dts |  168 ++++++++++++++++++++++++++++++++++
 include/dt-bindings/pinctrl/am43xx.h |   31 +++++++
 2 files changed, 199 insertions(+)
 create mode 100644 include/dt-bindings/pinctrl/am43xx.h

diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 74174d4..fbf9c4c 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -11,8 +11,176 @@
 /dts-v1/;
 
 #include "am4372.dtsi"
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "TI AM43x EPOS EVM";
 	compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43";
+
+	vmmcsd_fixed: fixedregulator-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+	};
+
+	am43xx_pinmux: pinmux@44e10800 {
+		cpsw_default: cpsw_default {
+			pinctrl-single,pins = <
+				/* Slave 1 */
+				0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs */
+				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
+				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
+				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxdv.rmii1_rxdv */
+				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
+				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
+				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
+				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
+				0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk.rmii1_refclk */
+			>;
+		};
+
+		cpsw_sleep: cpsw_sleep {
+			pinctrl-single,pins = <
+				/* Slave 1 reset value */
+				0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		davinci_mdio_default: davinci_mdio_default {
+			pinctrl-single,pins = <
+				/* MDIO */
+				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			>;
+		};
+
+		davinci_mdio_sleep: davinci_mdio_sleep {
+			pinctrl-single,pins = <
+				/* MDIO reset value */
+				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		i2c0_pins: pinmux_i2c0_pins {
+			pinctrl-single,pins = <
+				0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+				0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			>;
+		};
+	};
+
+	matrix_keypad: matrix_keypad@0 {
+			compatible = "gpio-matrix-keypad";
+			debounce-delay-ms = <5>;
+			col-scan-delay-us = <2>;
+
+			row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH		/* Bank0, pin12 */
+				     &gpio0 13 GPIO_ACTIVE_HIGH		/* Bank0, pin13 */
+				     &gpio0 14 GPIO_ACTIVE_HIGH		/* Bank0, pin14 */
+				     &gpio0 15 GPIO_ACTIVE_HIGH>;	/* Bank0, pin15 */
+
+			col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH		/* Bank3, pin9 */
+				     &gpio3 10 GPIO_ACTIVE_HIGH		/* Bank3, pin10 */
+				     &gpio2 18 GPIO_ACTIVE_HIGH		/* Bank2, pin18 */
+				     &gpio2 19 GPIO_ACTIVE_HIGH>;	/* Bank2, pin19 */
+
+			linux,keymap = <0x00000201	/* P1 */
+				0x01000204	/* P4 */
+				0x02000207	/* P7 */
+				0x0300020a	/* NUMERIC_STAR */
+				0x00010202	/* P2 */
+				0x01010205	/* P5 */
+				0x02010208	/* P8 */
+				0x03010200	/* P0 */
+				0x00020203	/* P3 */
+				0x01020206	/* P6 */
+				0x02020209	/* P9 */
+				0x0302020b	/* NUMERIC_POUND */
+				0x00030067	/* UP */
+				0x0103006a	/* RIGHT */
+				0x0203006c	/* DOWN */
+				0x03030069>;	/* LEFT */
+		};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <16>;
+	phy-mode = "rmii";
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rmii";
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	at24@50 {
+		compatible = "at24,24c256";
+		pagesize = <64>;
+		reg = <0x50>;
+	};
+
+	pixcir_ts@5c {
+		compatible = "pixcir,pixcir_ts";
+		reg = <0x5c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <17 0>;
+
+		attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+
+		x-size = <1024>;
+		y-size = <768>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
 };
diff --git a/include/dt-bindings/pinctrl/am43xx.h b/include/dt-bindings/pinctrl/am43xx.h
new file mode 100644
index 0000000..eb6c366a
--- /dev/null
+++ b/include/dt-bindings/pinctrl/am43xx.h
@@ -0,0 +1,31 @@
+/*
+ * This header provides constants specific to AM43XX pinctrl bindings.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_AM43XX_H
+#define _DT_BINDINGS_PINCTRL_AM43XX_H
+
+#define MUX_MODE0	0
+#define MUX_MODE1	1
+#define MUX_MODE2	2
+#define MUX_MODE3	3
+#define MUX_MODE4	4
+#define MUX_MODE5	5
+#define MUX_MODE6	6
+#define MUX_MODE7	7
+
+#define PULL_DISABLE		(1 << 16)
+#define PULL_UP			(1 << 17)
+#define INPUT_EN		(1 << 18)
+#define SLEWCTRL_FAST		(1 << 19)
+#define DS0_PULL_UP_DOWN_EN	(1 << 27)
+
+#define PIN_OUTPUT		(PULL_DISABLE)
+#define PIN_OUTPUT_PULLUP	(PULL_UP)
+#define PIN_OUTPUT_PULLDOWN	0
+#define PIN_INPUT		(INPUT_EN | PULL_DISABLE)
+#define PIN_INPUT_PULLUP	(INPUT_EN | PULL_UP)
+#define PIN_INPUT_PULLDOWN	(INPUT_EN)
+
+#endif
+
-- 
1.7.9.5

Re: [PATCH 0/2] ARM: dts: AM4372: Add more nodes

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 872 bytes --]

Hi,

On Fri, Oct 11, 2013 at 12:44:52AM +0530, Lokesh Vutla wrote:
> This patch series add nodes for l2-cache-controller, EDMA, mailbox,
> mmc, sham, and updates the properties for cpsw, i2c0, matrix-keypad. 
> 
> These patches are applied on top of Benoit's for_3.13/dts branch
> git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.13/dts
> 
> Testing:
> Tested EDMA, mmc, sham, aes, des, i2c0, cpsw, matric-keypad on AM4372 EPOS EVM
> with the addition of following two series:
> -> Tero's V8 of OMAP DT clock conversion
>   http://www.mail-archive.com/linux-omap@vger.kernel.org/msg96769.html
> -> Afzal's V5 of AM43x PRCM basic support
>   http://www.mail-archive.com/linux-omap@vger.kernel.org/msg96275.html

one extra piece of info:

all these patches are fresh out of Wakeup, tested on top of v3.12-rc3.

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [PATCH 0/2] ARM: dts: AM4372: Add more nodes

[Lokesh Vutla]

Hi Benoit,
On Friday 11 October 2013 12:44 AM, Lokesh Vutla wrote:
> This patch series add nodes for l2-cache-controller, EDMA, mailbox, mmc, sham,
> and updates the properties for cpsw, i2c0, matrix-keypad. 
> 
> These patches are applied on top of Benoit's for_3.13/dts branch
> git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.13/dts
Can you take this patch series for 3.13?

Thanks and regards,
Lokesh
> 
> Testing:
> Tested EDMA, mmc, sham, aes, des, i2c0, cpsw, matric-keypad on AM4372 EPOS EVM
> with the addition of following two series:
> -> Tero's V8 of OMAP DT clock conversion
>   http://www.mail-archive.com/linux-omap@vger.kernel.org/msg96769.html
> -> Afzal's V5 of AM43x PRCM basic support
>   http://www.mail-archive.com/linux-omap@vger.kernel.org/msg96275.html
> 
> Lokesh Vutla (1):
>   ARM: dts: AM4372: Add more nodes
> 
> Mugunthan V N (1):
>   ARM: dts: AM4372: Update Support for EPOS EVM
> 
>  arch/arm/boot/dts/am4372.dtsi        |  210 +++++++++++++++++++++++++++++++++-
>  arch/arm/boot/dts/am43x-epos-evm.dts |  168 +++++++++++++++++++++++++++
>  include/dt-bindings/pinctrl/am43xx.h |   31 +++++
>  3 files changed, 408 insertions(+), 1 deletion(-)
>  create mode 100644 include/dt-bindings/pinctrl/am43xx.h
> 

Re: [PATCH 0/2] ARM: dts: AM4372: Add more nodes

[Benoit Cousson]

Hi Lokesh,

On 18/10/2013 05:49, Lokesh Vutla wrote:
> Hi Benoit,
> On Friday 11 October 2013 12:44 AM, Lokesh Vutla wrote:
>> This patch series add nodes for l2-cache-controller, EDMA, mailbox, mmc, sham,
>> and updates the properties for cpsw, i2c0, matrix-keypad.
>>
>> These patches are applied on top of Benoit's for_3.13/dts branch
>> git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.13/dts
> Can you take this patch series for 3.13?

I've just applied it after a sloght change in the subject and in the SoB 
list.

     ARM: dts: AM4372: Add L2, EDMA, mailbox, MMC and SHAM nodes

     Populate nodes for l2-cache-controller, EDMA, mailbox,
     mmc, sham.

     Update as well DT properties for epwmss, aes, des.

     Signed-off-by: Suman Anna <s-anna@ti.com>
     Signed-off-by: Balaji T K <balajitk@ti.com>
     Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
     Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
     Signed-off-by: Benoit Cousson <bcousson@baylibre.com>


I added all the author you listed in a more formal way.

Regards,
Benoit

>
> Thanks and regards,
> Lokesh
>>
>> Testing:
>> Tested EDMA, mmc, sham, aes, des, i2c0, cpsw, matric-keypad on AM4372 EPOS EVM
>> with the addition of following two series:
>> -> Tero's V8 of OMAP DT clock conversion
>>    http://www.mail-archive.com/linux-omap@vger.kernel.org/msg96769.html
>> -> Afzal's V5 of AM43x PRCM basic support
>>    http://www.mail-archive.com/linux-omap@vger.kernel.org/msg96275.html
>>
>> Lokesh Vutla (1):
>>    ARM: dts: AM4372: Add more nodes
>>
>> Mugunthan V N (1):
>>    ARM: dts: AM4372: Update Support for EPOS EVM
>>
>>   arch/arm/boot/dts/am4372.dtsi        |  210 +++++++++++++++++++++++++++++++++-
>>   arch/arm/boot/dts/am43x-epos-evm.dts |  168 +++++++++++++++++++++++++++
>>   include/dt-bindings/pinctrl/am43xx.h |   31 +++++
>>   3 files changed, 408 insertions(+), 1 deletion(-)
>>   create mode 100644 include/dt-bindings/pinctrl/am43xx.h
>>
>


-- 
Benoît Cousson
BayLibre
Embedded Linux Technology Lab
www.baylibre.com
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 0/2] ARM: dts: AM4372: Add more nodes

[Lokesh Vutla]

Hi Benoit,
On Friday 18 October 2013 12:26 PM, Benoit Cousson wrote:
> Hi Lokesh,
> 
> On 18/10/2013 05:49, Lokesh Vutla wrote:
>> Hi Benoit,
>> On Friday 11 October 2013 12:44 AM, Lokesh Vutla wrote:
>>> This patch series add nodes for l2-cache-controller, EDMA, mailbox, mmc, sham,
>>> and updates the properties for cpsw, i2c0, matrix-keypad.
>>>
>>> These patches are applied on top of Benoit's for_3.13/dts branch
>>> git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.13/dts
>> Can you take this patch series for 3.13?
> 
> I've just applied it after a sloght change in the subject and in the SoB list.
> 
>     ARM: dts: AM4372: Add L2, EDMA, mailbox, MMC and SHAM nodes
> 
>     Populate nodes for l2-cache-controller, EDMA, mailbox,
>     mmc, sham.
> 
>     Update as well DT properties for epwmss, aes, des.
> 
>     Signed-off-by: Suman Anna <s-anna@ti.com>
>     Signed-off-by: Balaji T K <balajitk@ti.com>
>     Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
>     Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
>     Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
> 
> 
> I added all the author you listed in a more formal way.
Thanks.

Regards,
Lokesh
> 
> Regards,
> Benoit
> 
>>
>> Thanks and regards,
>> Lokesh
>>>
>>> Testing:
>>> Tested EDMA, mmc, sham, aes, des, i2c0, cpsw, matric-keypad on AM4372 EPOS EVM
>>> with the addition of following two series:
>>> -> Tero's V8 of OMAP DT clock conversion
>>>    http://www.mail-archive.com/linux-omap@vger.kernel.org/msg96769.html
>>> -> Afzal's V5 of AM43x PRCM basic support
>>>    http://www.mail-archive.com/linux-omap@vger.kernel.org/msg96275.html
>>>
>>> Lokesh Vutla (1):
>>>    ARM: dts: AM4372: Add more nodes
>>>
>>> Mugunthan V N (1):
>>>    ARM: dts: AM4372: Update Support for EPOS EVM
>>>
>>>   arch/arm/boot/dts/am4372.dtsi        |  210 +++++++++++++++++++++++++++++++++-
>>>   arch/arm/boot/dts/am43x-epos-evm.dts |  168 +++++++++++++++++++++++++++
>>>   include/dt-bindings/pinctrl/am43xx.h |   31 +++++
>>>   3 files changed, 408 insertions(+), 1 deletion(-)
>>>   create mode 100644 include/dt-bindings/pinctrl/am43xx.h
>>>
>>
> 
>