From: Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
To: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
"dinguyen-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org"
<dinguyen-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org>
Cc: "dinh.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org"
<dinh.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Jamie Iles <jamie-wmLquQDDieKakBO8gow8eQ@public.gmane.org>,
Viresh Kumar
<viresh.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Wim Van Sebroeck <wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org>,
Pavel Machek <pavel-ynQEQJNshbs@public.gmane.org>,
"rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org"
<rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>,
Pawel Moll <Pawel.Moll-5wv7dgnIgG8@public.gmane.org>,
Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>,
Ian Campbell
<ian.campbell-Sxgqhf6Nn4DQT0dZR+AlfA@public.gmane.org>,
"devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: [RESEND PATCHv2] watchdog: dw: Enable OF support for DW watchdog timer.
Date: Mon, 21 Oct 2013 17:41:20 -0700 [thread overview]
Message-ID: <5265C9B0.2060003@roeck-us.net> (raw)
In-Reply-To: <20131021110532.GA8144@kartoffel>
On 10/21/2013 04:05 AM, Mark Rutland wrote:
> On Wed, Oct 02, 2013 at 07:44:32PM +0100, dinguyen-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org wrote:
>> From: Dinh Nguyen <dinguyen-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org>
>>
>> Add device tree support to the DW watchdog timer.
>>
>> Signed-off-by: Dinh Nguyen <dinguyen-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org>
>> Acked-by: Jamie Iles <jamie-wmLquQDDieKakBO8gow8eQ@public.gmane.org>
>> Reviewed-by: Pavel Machek <pavel-ynQEQJNshbs@public.gmane.org>
>> Cc: Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
>> Cc: Jamie Iles <jamie-wmLquQDDieKakBO8gow8eQ@public.gmane.org>
>> Cc: Viresh Kumar <viresh.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>> Cc: Wim Van Sebroeck <wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org>
>> Cc: Pavel Machek <pavel-ynQEQJNshbs@public.gmane.org>
>> Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
>> Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>
>> Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
>> Cc: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
>> Cc: Ian Campbell <ian.campbell-Sxgqhf6Nn4DQT0dZR+AlfA@public.gmane.org>
>> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>> Cc: linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>> ---
>> v2:
>> - Use of_match_ptr() for of_match_table
>> ---
>> .../devicetree/bindings/watchdog/dw_wdt.txt | 16 ++++++++++++++++
>> drivers/watchdog/dw_wdt.c | 8 ++++++++
>> 2 files changed, 24 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/watchdog/dw_wdt.txt
>>
>> diff --git a/Documentation/devicetree/bindings/watchdog/dw_wdt.txt b/Documentation/devicetree/bindings/watchdog/dw_wdt.txt
>> new file mode 100644
>> index 0000000..29e150b
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/watchdog/dw_wdt.txt
>> @@ -0,0 +1,16 @@
>> +Synopsys Designware Watchdog Timer
>> +
>> +Required Properties:
>> +
>> +- Compatiblity : "snps,dw-wdt"
>
> This should presumably be:
>
> - compatbile: should contain "snps,dw-wdt"
>
Hi Mark,
s/compatbile/compatible/ :-)
"must be" or "should contain" ? I see both in various bindings.
Is there a preference ?
>> +- reg : Base address of the watchdog timer register.
>
> And the size...
>
>> +
>> +Example:
>> +
>> + watchdog0: wd@ffd02000 {
>> + compatible = "snps,dw-wdt";
>> + reg = <0xffd02000 0x1000>;
>> + interrupts = <0 171 4>;
>
> This wasn't mentioned.
>
> Is it necessary?
>
From looking into the code ...
The driver doesn't use interrupts, so I guess the answer is no. Cut-and-paste error, maybe ?
> Is it the only interrupt?
>
>> + clocks = <&per_base_clk>;
>
> Similarly, is this the only clock?
>
The driver uses one clock, and it is mandatory.
Guenter
> Is it necessary?
>
>> + status = "okay";
>
> This is unnecessary.
>
> Thanks,
> Mark.
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-10-22 0:41 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-02 18:44 [RESEND PATCHv2] watchdog: dw: Enable OF support for DW watchdog timer dinguyen-EIB2kfCEclfQT0dZR+AlfA
[not found] ` <1380739472-26172-1-git-send-email-dinguyen-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org>
2013-10-02 19:27 ` Guenter Roeck
2013-10-21 11:05 ` Mark Rutland
2013-10-22 0:41 ` Guenter Roeck [this message]
[not found] ` <5265C9B0.2060003-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-10-22 10:39 ` Mark Rutland
2013-10-22 10:57 ` Dinh Nguyen
[not found] ` <52665A1E.5020700-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-10-22 11:02 ` Mark Rutland
2013-10-22 11:02 ` Jamie Iles
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5265C9B0.2060003@roeck-us.net \
--to=linux-0h96xk9xttrk1umjsbkqmq@public.gmane.org \
--cc=Pawel.Moll-5wv7dgnIgG8@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dinguyen-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org \
--cc=dinh.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=ian.campbell-Sxgqhf6Nn4DQT0dZR+AlfA@public.gmane.org \
--cc=jamie-wmLquQDDieKakBO8gow8eQ@public.gmane.org \
--cc=linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pavel-ynQEQJNshbs@public.gmane.org \
--cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
--cc=viresh.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).