From mboxrd@z Thu Jan  1 00:00:00 1970
From: "Arend van Spriel" <arend@broadcom.com>
Subject: Re: [PATCH v2 7/9] phy: add Broadcom Kona USB2 PHY DT binding
Date: Fri, 1 Nov 2013 21:54:10 +0100
Message-ID: <527414F2.7090402@broadcom.com>
References: <1383335158-19730-1-git-send-email-matt.porter@linaro.org>
 <1383335158-19730-8-git-send-email-matt.porter@linaro.org>
Mime-Version: 1.0
Content-Type: text/plain;
 charset=iso-8859-1;
 format=flowed
Content-Transfer-Encoding: 7bit
Return-path: <linux-kernel-owner@vger.kernel.org>
In-Reply-To: <1383335158-19730-8-git-send-email-matt.porter@linaro.org>
Sender: linux-kernel-owner@vger.kernel.org
To: Matt Porter <matt.porter@linaro.org>, Felipe Balbi <balbi@ti.com>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Kishon Vijay Abraham I <kishon@ti.com>, Rob Herring <rob.herring@calxeda.com>, Pawel Moll <pawel.moll@arm.com>, Mark Rutland <mark.rutland@arm.com>, Kumar Gala <galak@codeaurora.org>, Ian Campbell <ijc+devicetree@hellion.org.uk>, Christian Daudt <bcm@fixthebug.org>, Paul Zimmerman <paulz@synopsys.com>
Cc: Linux USB List <linux-usb@vger.kernel.org>, Linux ARM Kernel List <linux-arm-kernel@lists.infradead.org>, Linux Kernel Mailing List <linux-kernel@vger.kernel.org>, Devicetree List <devicetree@vger.kernel.org>, Linaro Patches <patches@linaro.org>
List-Id: devicetree@vger.kernel.org

On 11/01/2013 08:45 PM, Matt Porter wrote:
> Add a binding that describes the Broadcom Kona USB2 PHY found
> on the BCM281xx family of SoCs.
>
> Signed-off-by: Matt Porter <matt.porter@linaro.org>
> ---
>   .../devicetree/bindings/phy/bcm-kona-usb2-phy.txt         | 15 +++++++++++++++
>   1 file changed, 15 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt
>
> diff --git a/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt
> new file mode 100644
> index 0000000..db309e2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt
> @@ -0,0 +1,15 @@
> +BROADCOM KONA USB2 PHY
> +
> +Required properties:
> + - compatible: brcm,kona-usb2-phy
> + - regs: offset and length of the PHY registers
> + - #phy-cells: must be 0
> +Refer to phy/phy-bindings.txt for the generic PHY binding properties
> +
> +Example:
> +
> +	usbphy: usbphy@3f130000 {
> +		compatible = "brcm,kona-usb2-phy";
> +		reg = <0x3f130000 0x28>;

I expect 'regs' iso 'reg' in this example.

Regards,
Arend

> +		#phy-cells = <0>;
> +	};
>