From: Tero Kristo <t-kristo@ti.com>
To: Nishanth Menon <nm@ti.com>,
linux-omap@vger.kernel.org, paul@pwsan.com, tony@atomide.com,
bcousson@baylibre.com, rnayak@ti.com, mturquette@linaro.org
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: Re: [PATCHv9 33/43] ARM: dts: am43xx clock data
Date: Mon, 4 Nov 2013 16:15:19 +0200 [thread overview]
Message-ID: <5277ABF7.70104@ti.com> (raw)
In-Reply-To: <52741A2C.1000707@ti.com>
On 11/01/2013 11:16 PM, Nishanth Menon wrote:
> On 10/25/2013 10:57 AM, Tero Kristo wrote:
> [...]
>> diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
>> index 974d103..1fb3ac2 100644
>> --- a/arch/arm/boot/dts/am4372.dtsi
>> +++ b/arch/arm/boot/dts/am4372.dtsi
>> @@ -67,6 +67,8 @@
>> ranges;
>> ti,hwmods = "l3_main";
>>
>> + /include/ "am43xx-clocks.dtsi"
>> +
>> edma: edma@49000000 {
>> compatible = "ti,edma3";
>> ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
>> diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
>> new file mode 100644
>> index 0000000..1cc5071
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
>> @@ -0,0 +1,666 @@
>> +/*
>> + * Device Tree Source for AM43xx clock data
>> + *
>> + * Copyright (C) 2013 Texas Instruments, Inc.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +scrm: scrm@44e10000 {
>> + compatible = "ti,scrm";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + reg = <0x44e10000 0x2000>;
>
> here and other dts -> could we keep the scrm, prm, cm devices in
> SoC.dtsi? and clocks.dtsi just contains the clock nodes?
Could do that with some links yea, similar to how the clock data mods
are done in this rev. Will check it out how it works.
-Tero
>
> [...]
>
next prev parent reply other threads:[~2013-11-04 14:15 UTC|newest]
Thread overview: 106+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-25 15:56 [PATCHv9 00/43] ARM: TI SoC clock DT conversion Tero Kristo
2013-10-25 15:56 ` [PATCHv9 01/43] clk: Add support for regmap register read/write Tero Kristo
2013-10-31 14:03 ` Nishanth Menon
2013-10-31 14:40 ` Tero Kristo
2013-10-31 15:46 ` Nishanth Menon
2013-11-01 8:57 ` Tero Kristo
2013-11-05 21:43 ` Gerhard Sittig
2013-11-06 10:54 ` Tero Kristo
2013-11-02 13:26 ` Tomasz Figa
2013-10-25 15:56 ` [PATCHv9 02/43] clk: divider: add init call which supports regmap Tero Kristo
2013-10-25 15:56 ` [PATCHv9 03/43] clk: mux: " Tero Kristo
2013-10-25 15:56 ` [PATCHv9 04/43] CLK: TI: Add DPLL clock support Tero Kristo
2013-10-31 14:19 ` Nishanth Menon
2013-10-31 14:56 ` Tero Kristo
2013-10-31 15:25 ` Nishanth Menon
2013-10-25 15:56 ` [PATCHv9 05/43] CLK: TI: add DT alias clock registration mechanism Tero Kristo
2013-10-29 17:50 ` Matt Sealey
2013-10-30 8:29 ` Tero Kristo
2013-10-30 17:38 ` Matt Sealey
2013-10-31 9:18 ` Tero Kristo
2013-11-02 13:49 ` Tomasz Figa
2013-11-04 22:45 ` Matt Sealey
2013-10-25 15:57 ` [PATCHv9 06/43] CLK: ti: add init support for clock IP blocks Tero Kristo
2013-10-31 15:42 ` Nishanth Menon
2013-11-01 9:12 ` Tero Kristo
2013-11-01 19:13 ` Nishanth Menon
2013-11-04 7:23 ` Tero Kristo
2013-10-25 15:57 ` [PATCHv9 07/43] CLK: TI: add autoidle support Tero Kristo
2013-10-31 16:05 ` Nishanth Menon
2013-11-01 9:18 ` Tero Kristo
2013-11-01 19:16 ` Nishanth Menon
2013-11-04 10:00 ` Tero Kristo
2013-11-04 14:59 ` Nishanth Menon
2013-11-05 8:10 ` Tero Kristo
2013-10-25 15:57 ` [PATCHv9 08/43] clk: ti: add composite clock support Tero Kristo
2013-10-31 16:27 ` Nishanth Menon
2013-10-31 16:32 ` Nishanth Menon
2013-11-01 9:40 ` Tero Kristo
2013-11-01 9:35 ` Tero Kristo
2013-11-01 19:24 ` Nishanth Menon
2013-10-25 15:57 ` [PATCHv9 09/43] CLK: ti: add support for ti divider-clock Tero Kristo
2013-10-31 18:02 ` Nishanth Menon
2013-11-01 9:48 ` Tero Kristo
2013-11-01 9:54 ` Tero Kristo
2013-11-01 19:35 ` Nishanth Menon
2013-11-04 10:54 ` Tero Kristo
2013-10-25 15:57 ` [PATCHv9 10/43] clk: ti: add support for TI fixed factor clock Tero Kristo
2013-10-31 18:12 ` Nishanth Menon
2013-11-01 9:52 ` Tero Kristo
2013-10-25 15:57 ` [PATCHv9 11/43] CLK: TI: add support for gate clock Tero Kristo
2013-11-01 20:11 ` Nishanth Menon
2013-11-04 12:23 ` Tero Kristo
2013-10-25 15:57 ` [PATCHv9 12/43] CLK: TI: add support for clockdomain binding Tero Kristo
2013-11-01 20:22 ` Nishanth Menon
[not found] ` <52740D79.3090107-l0cyMroinI0@public.gmane.org>
2013-11-04 14:30 ` Tero Kristo
2013-10-25 15:57 ` [PATCHv9 13/43] clk: ti: add support for basic mux clock Tero Kristo
2013-11-01 21:01 ` Nishanth Menon
2013-11-05 8:09 ` Tero Kristo
2013-10-25 15:57 ` [PATCHv9 14/43] CLK: TI: add omap4 clock init file Tero Kristo
2013-10-25 15:57 ` [PATCHv9 15/43] CLK: TI: add omap5 " Tero Kristo
2013-10-25 15:57 ` [PATCHv9 16/43] CLK: TI: omap5: Initialize USB_DPLL at boot Tero Kristo
2013-10-25 15:57 ` [PATCHv9 17/43] CLK: TI: DRA7: Add APLL support Tero Kristo
2013-10-25 15:57 ` [PATCHv9 18/43] CLK: TI: add dra7 clock init file Tero Kristo
2013-10-25 15:57 ` [PATCHv9 19/43] CLK: TI: add am33xx " Tero Kristo
2013-10-25 15:57 ` [PATCHv9 21/43] CLK: TI: add omap3 " Tero Kristo
2013-10-25 15:57 ` [PATCHv9 22/43] CLK: TI: add am43xx " Tero Kristo
2013-10-25 15:57 ` [PATCHv9 23/43] ARM: dts: omap4 clock data Tero Kristo
2013-10-25 15:57 ` [PATCHv9 24/43] ARM: dts: omap5 " Tero Kristo
2013-10-25 15:57 ` [PATCHv9 26/43] ARM: dts: clk: Add apll related clocks Tero Kristo
2013-10-25 15:57 ` [PATCHv9 27/43] ARM: dts: DRA7: Change apll_pcie_m2_ck to fixed factor clock Tero Kristo
2013-10-25 15:57 ` [PATCHv9 28/43] ARM: dts: DRA7: Add PCIe related clock nodes Tero Kristo
2013-10-25 15:57 ` [PATCHv9 29/43] ARM: dts: DRA7: link in clock DT data Tero Kristo
2013-10-25 15:57 ` [PATCHv9 30/43] ARM: dts: am33xx clock data Tero Kristo
2013-10-26 0:36 ` Jan Lübbe
2013-10-26 12:46 ` Tero Kristo
2013-10-28 9:59 ` Jan Lübbe
2013-10-28 10:12 ` Tero Kristo
2013-10-25 15:57 ` [PATCHv9 31/43] ARM: dts: omap3 " Tero Kristo
2013-10-25 15:57 ` [PATCHv9 32/43] ARM: dts: AM35xx: use DT " Tero Kristo
2013-11-01 21:18 ` Nishanth Menon
2013-11-05 8:12 ` Tero Kristo
2013-10-25 15:57 ` [PATCHv9 33/43] ARM: dts: am43xx " Tero Kristo
2013-11-01 21:16 ` Nishanth Menon
2013-11-04 14:15 ` Tero Kristo [this message]
2013-10-25 15:57 ` [PATCHv9 34/43] ARM: OMAP2+: clock: add support for regmap Tero Kristo
2013-10-25 15:57 ` [PATCHv9 35/43] ARM: OMAP2+: clock: use driver API instead of direct memory read/write Tero Kristo
[not found] ` <1382716658-6964-1-git-send-email-t-kristo-l0cyMroinI0@public.gmane.org>
2013-10-25 15:57 ` [PATCHv9 20/43] CLK: TI: add interface clock support for OMAP3 Tero Kristo
2013-10-25 15:57 ` [PATCHv9 25/43] ARM: dts: dra7 clock data Tero Kristo
2013-10-25 15:57 ` [PATCHv9 36/43] ARM: OMAP: hwmod: fix an incorrect clk type cast with _get_clkdm Tero Kristo
2013-10-25 15:57 ` [PATCHv9 40/43] ARM: OMAP4: remove old clock data and link in new clock init code Tero Kristo
2013-10-25 15:57 ` [PATCHv9 37/43] ARM: OMAP3: hwmod: initialize clkdm from clkdm_name Tero Kristo
2013-10-25 15:57 ` [PATCHv9 38/43] ARM: OMAP2+: PRM: add support for initializing PRCM clock modules from DT Tero Kristo
2013-11-01 21:07 ` Nishanth Menon
2013-11-05 8:22 ` Tero Kristo
2013-10-25 15:57 ` [PATCHv9 39/43] ARM: OMAP2+: io: use new clock init API Tero Kristo
2013-10-25 15:57 ` [PATCHv9 41/43] ARM: OMAP: DRA7: Enable clock init Tero Kristo
2013-10-25 15:57 ` [PATCHv9 42/43] ARM: AM33xx: remove old clock data and link in new clock init code Tero Kristo
2013-10-25 15:57 ` [PATCHv9 43/43] ARM: OMAP3: use DT clock init if DT data is available Tero Kristo
2013-10-29 16:19 ` [PATCHv9 00/43] ARM: TI SoC clock DT conversion Nishanth Menon
2013-10-30 8:23 ` Tero Kristo
2013-10-30 15:00 ` Nishanth Menon
2013-10-30 20:10 ` Nishanth Menon
2013-10-31 9:10 ` Tero Kristo
2013-10-31 13:55 ` Nishanth Menon
2013-11-01 21:25 ` Nishanth Menon
2013-11-04 7:15 ` Tero Kristo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5277ABF7.70104@ti.com \
--to=t-kristo@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=nm@ti.com \
--cc=paul@pwsan.com \
--cc=rnayak@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).