From mboxrd@z Thu Jan 1 00:00:00 1970 From: "ivan.khoronzhuk" Subject: Fwd: [PATCH 7/8] watchdog: davinci: add "clocks" property Date: Wed, 6 Nov 2013 13:32:56 +0200 Message-ID: <527A28E8.4010204@ti.com> References: <1383680783-12114-8-git-send-email-ivan.khoronzhuk@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1383680783-12114-8-git-send-email-ivan.khoronzhuk@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: Santosh Shilimkar , wim@iguana.be, nsekhar@ti.com, linux-watchdog@vger.kernel.org, devicetree@vger.kernel.org Cc: grant.likely@linaro.org, rob.herring@calxeda.com, pawel.moll@arm.com, mark.rutland@arm.com, swarren@wwwdotorg.org, galak@kernel.crashing.org, ijc+devicetree@hellion.org.uk, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org The Keystone arch is using clocks in DT and source clock for watchdog has to be specified, so add this to binding. Signed-off-by: Ivan Khoronzhuk --- .../devicetree/bindings/watchdog/davinci-wdt.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt index fddced9..4db4d0e 100644 --- a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt @@ -7,6 +7,10 @@ Required properties: - reg : Should contain WDT registers location and length +- clocks: phandle reference to the controller clock. + Required only for Keystone arch. + See clock-bindings.txt + Optional properties: - timeout-sec: Contains the watchdog timeout in seconds @@ -21,4 +25,5 @@ wdt: wdt@2320000 { compatible = "ti,davinci-wdt"; reg = <0x02320000 0x80>; timeout-sec = <30>; + clocks = <&clkwdtimer0>; }; -- 1.7.9.5