devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hongbo Zhang <hongbo.zhang-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
To: Dan Williams <dan.j.williams-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Cc: "Koul,
	Vinod" <vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
	rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org,
	pawel.moll-5wv7dgnIgG8@public.gmane.org,
	mark.rutland-5wv7dgnIgG8@public.gmane.org,
	Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>,
	ian.campbell-Sxgqhf6Nn4DQT0dZR+AlfA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linuxppc-dev
	<linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org>,
	Linux Kernel Mailing List
	<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	dmaengine-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v11 3/3] DMA: Freescale: update driver to support 8-channel DMA engine
Date: Mon, 11 Nov 2013 17:12:07 +0800	[thread overview]
Message-ID: <52809F67.20901@freescale.com> (raw)
In-Reply-To: <CAA9_cme3c7SjH3iio0oR3FHpfoMzgrBDO-2k_Yf68G-AgFNqfA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>

On 11/08/2013 10:45 AM, Dan Williams wrote:
> On Mon, Nov 4, 2013 at 6:31 PM, Hongbo Zhang <hongbo.zhang-KZfg59tc24xl57MIdRCFDg@public.gmane.org> wrote:
>> Hi Vinod Koul and Dan Williams,
>> Ping?
>>
> Not much to review from the dmaengine side, just one question below.
> It would be helpful if you can send these to the new dmaengine
> patchwork at dmaengine-u79uwXL29TY76Z2rM5mHXA@public.gmane.org with the Acks you have already
> collected.
>

Sorry didn't notice this new mailing list.
I will resend these patches to it again.

>>
>> On 10/17/2013 01:56 PM, Hongbo Zhang wrote:
>>> Hi Vinod,
>>> I have gotten ACK from Mark for both the 1/3 and 2/3 patches.
>>> Thanks.
>>>
>>>
>>> On 09/26/2013 05:33 PM, hongbo.zhang-KZfg59tc24xl57MIdRCFDg@public.gmane.org wrote:
>>>> From: Hongbo Zhang <hongbo.zhang-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
>>>>
>>>> This patch adds support to 8-channel DMA engine, thus the driver works
>>>> for both
>>>> the new 8-channel and the legacy 4-channel DMA engines.
>>>>
>>>> Signed-off-by: Hongbo Zhang <hongbo.zhang-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
>>>> ---
>>>>    drivers/dma/Kconfig  |    9 +++++----
>>>>    drivers/dma/fsldma.c |    9 ++++++---
>>>>    drivers/dma/fsldma.h |    2 +-
>>>>    3 files changed, 12 insertions(+), 8 deletions(-)
>>>>
>>>> diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
>>>> index 6825957..3979c65 100644
>>>> --- a/drivers/dma/Kconfig
>>>> +++ b/drivers/dma/Kconfig
>>>> @@ -89,14 +89,15 @@ config AT_HDMAC
>>>>          Support the Atmel AHB DMA controller.
>>>>      config FSL_DMA
>>>> -    tristate "Freescale Elo and Elo Plus DMA support"
>>>> +    tristate "Freescale Elo series DMA support"
>>>>        depends on FSL_SOC
>>>>        select DMA_ENGINE
>>>>        select ASYNC_TX_ENABLE_CHANNEL_SWITCH
>>>>        ---help---
>>>> -      Enable support for the Freescale Elo and Elo Plus DMA controllers.
>>>> -      The Elo is the DMA controller on some 82xx and 83xx parts, and the
>>>> -      Elo Plus is the DMA controller on 85xx and 86xx parts.
>>>> +      Enable support for the Freescale Elo series DMA controllers.
>>>> +      The Elo is the DMA controller on some mpc82xx and mpc83xx parts,
>>>> the
>>>> +      EloPlus is on mpc85xx and mpc86xx and Pxxx parts, and the Elo3 is
>>>> on
>>>> +      some Txxx and Bxxx parts.
>>>>      config MPC512X_DMA
>>>>        tristate "Freescale MPC512x built-in DMA engine support"
>>>> diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
>>>> index 49e8fbd..16a9a48 100644
>>>> --- a/drivers/dma/fsldma.c
>>>> +++ b/drivers/dma/fsldma.c
>>>> @@ -1261,7 +1261,9 @@ static int fsl_dma_chan_probe(struct fsldma_device
>>>> *fdev,
>>>>        WARN_ON(fdev->feature != chan->feature);
>>>>          chan->dev = fdev->dev;
>>>> -    chan->id = ((res.start - 0x100) & 0xfff) >> 7;
>>>> +    chan->id = (res.start & 0xfff) < 0x300 ?
>>>> +           ((res.start - 0x100) & 0xfff) >> 7 :
>>>> +           ((res.start - 0x200) & 0xfff) >> 7;
>>>>        if (chan->id >= FSL_DMA_MAX_CHANS_PER_DEVICE) {
> Isn't it a bit fragile to have this based on the resource address?
> Can't device tree tell you the channel id directly by an index into
> the "dma0: dma@100300" node?

Yes, both this way and putting a "cell-index" into device tree work.
This won't be fragile, because the resource address should always be 
defined correctly, otherwise even if we can tell a channel id by 
"cell-index" but with wrong resource address, nothing will work.
This piece of code only doesn't seem as neat as using "cell-index", but 
we prefer the style that let the device tree describes as true as what 
hardware really has. This doesn't mean "cell-index" isn't acceptable, if 
it is necessary and unavoidable, we can send another patch to add it, 
but currently there is no need and we don't have to do this.

> --
> Dan
>



--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2013-11-11  9:12 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-09-26  9:33 [PATCH v11 0/3] DMA: Freescale: Add support for 8-channel DMA engine hongbo.zhang-KZfg59tc24xl57MIdRCFDg
2013-09-26  9:33 ` [PATCH v11 1/3] DMA: Freescale: revise device tree binding document hongbo.zhang
2013-09-26  9:33 ` [PATCH v11 2/3] DMA: Freescale: Add new 8-channel DMA engine device tree nodes hongbo.zhang
2013-10-08  3:22   ` Hongbo Zhang
     [not found]     ` <52537A5F.7090802-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2013-10-15 13:38       ` Mark Rutland
2013-10-16  1:59         ` Hongbo Zhang
2013-09-26  9:33 ` [PATCH v11 3/3] DMA: Freescale: update driver to support 8-channel DMA engine hongbo.zhang
     [not found]   ` <1380188023-3936-4-git-send-email-hongbo.zhang-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2013-10-17  5:56     ` Hongbo Zhang
     [not found]       ` <525F7C18.3010409-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2013-11-05  2:31         ` Hongbo Zhang
     [not found]           ` <5278587F.7090500-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2013-11-08  2:45             ` Dan Williams
     [not found]               ` <CAA9_cme3c7SjH3iio0oR3FHpfoMzgrBDO-2k_Yf68G-AgFNqfA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-11-11  9:12                 ` Hongbo Zhang [this message]
     [not found]                   ` <52809F67.20901-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2013-11-12  0:09                     ` Dan Williams
     [not found]                       ` <CAPcyv4h00zGc2=ZLwnCpP3WTQ8JbFteV-torU+qCo98YXrfq5A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-11-12  7:05                         ` Hongbo Zhang
     [not found] ` <1380188023-3936-1-git-send-email-hongbo.zhang-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2013-11-13  8:57   ` [PATCH v11 0/3] DMA: Freescale: Add support for " Vinod Koul
     [not found]     ` <20131113085705.GR8834-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2013-11-13  9:54       ` Hongbo Zhang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=52809F67.20901@freescale.com \
    --to=hongbo.zhang-kzfg59tc24xl57midrcfdg@public.gmane.org \
    --cc=dan.j.williams-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=dmaengine-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=ian.campbell-Sxgqhf6Nn4DQT0dZR+AlfA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
    --cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
    --cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
    --cc=vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).